Connection couplings | Type: VK 14 x 12, For: BSR 64 with stand
Merk: Buddeberg GmbHBeschikbaar in 6 variantenFixed-diameter connection between motor and stirring shaft. Suitable for use in potentially explosive atmospheres (ATEX). Material no. 1.4404Connection couplings | Type: VK 14 x 12, For: BSR 64 with stand
€97,00
Flexible clutch | Type: FK 1
Merk: Buddeberg GmbHRequired for stirring tasks using glass stirring rods. The flexible coupling compensates for any structural variances.Flexible clutch | Type: FK 1
€106,00
Globe Stirrer Couplings, POM | Opening for stirrer shaft mm: Inner square SW6, Chuck adaptor Ø bottom mm: SW8, Overall length mm: 180
Merk: Bohlender GmbHBeschikbaar in 8 variantenMade of POM, a plastic material with a good mechanical strength, powerful transmission of up to 300 Ncm, suitable for a speed of up to 1.200 rounds per minute, maximum misalignment of axes 10 mm. Ideal for balancing misalignment of axes between agitator and stirrer shaft, suitable for glass, metal or PTFE stirrer shafts.very low centrifugal forces due to low weightsuitable for both left and right-handed rotationno resonancesimple assembly by means of screw joints with clamp ringspivot (length 90 mm) can be shortened by the userGlobe Stirrer Couplings, POM | Opening for stirrer shaft mm: Inner square SW6, Chuck adaptor Ø bottom mm: SW8, Overall length mm: 180
€136,51
Keyless chuck for overhead stirrers | Type: R 60, Jaw opening mm: 0.5 ... 10
Merk: IKA-Werke GmbH & Co.KGBeschikbaar in 2 variantenR 60: Only for use with EUROSTAR 20 / 40 / 60 / 100 / 200 / RW 20, excluding EUROSTAR 20 high speed digital and control.R 60.1: For MINISTAR 20 / 40 / 80 digital and control, MICROSTAR series and NANOSTAR 7.5 digital.Keyless chuck for overhead stirrers | Type: R 60, Jaw opening mm: 0.5 ... 10
€92,50
Magnetic stirrer couplings with ground joint | Type: BUK K60 S2, Joint size NS: 45/40, Volume ml: 5000
Merk: Buddeberg GmbHBeschikbaar in 3 variantenStirrer head with a permanent magnetic coupling for mixing applications under vacuum. No straight-through shaft, no shaft sealing rings required as the torque is provided contactless by magnetic force.Speed: 2500 rpmMaterial: 1.4435 (AISI 316L)Seal: FKMBearing: Ball bearing made of stainless steelDrive shaft supplied with 6 mm external square stub.Magnetic stirrer couplings with ground joint | Type: BUK K60 S2, Joint size NS: 45/40, Volume ml: 5000
€5.513,20
Magnetic Stirrer Heads Complete | Shaft diam. mm: 6, NS: 19/26, drive shaft out side Ø mm: 28 mm
Merk: Bohlender GmbHBeschikbaar in 3 variantenPerfect combination of drive shaft with ball bearings, rotor and lower bearing made of PTFE/PEEK and a rod made of borosilicate glass. Requires little space due to compact construction. No leakage or memory effects due to non-porous, welded rotor. This rotor holds the stirrer shaft by means of three stud screws which are fixed into counterbores on the stirrer shaft. This provides optimum power transmission and secure mounting. The 6mm square drive can be fixed into the stirrer coupling or into the agitator. powerful transmission of up to 50 Ncmno grease requiredall products exposed to the medium being stirred do not contain any metalshigh speed of up to max. 1500 rpmhigh working temperatures up to +250 °C are possibleexcellent chemical resistancesafe to run dryhigh durabilityMagnetic Stirrer Heads Complete | Shaft diam. mm: 6, NS: 19/26, drive shaft out side Ø mm: 28 mm
€1.080,96
Magnetic Stirrer Heads P-MRK | For diam. stirring rod mm: 10, Height mm: 145, Joint size NS: 45/40
Merk: Bohlender GmbHBeschikbaar in 3 variantenIdeal stirrer head for PTFE-jacketed stirrer shafts from BOLA. Consisting of capsuled drive shaft (stainless steel) with ball bearings, rotor and lower bearing made of PTFE/PEEK and a hollow shaft made of borosilicate glass. Requires little space due to compact construction.No leakage or memory effects due to non-porous, welded rotor. Compression fittings for safe fixing of stirrer shaft and optimum power transmission. Joint-Cone with nut (Safe-Lab) for easy locking and unlocking of the ground joint. Square size 6mm for accepting an agitator or a stirrer coupling. Insertion length of shaft 95mm. Drive shaft outside diameter 50mm.gastight stirrer head for perfect vacuumstirrer shaft's height adjustable, approx. 40mmalso suitable for shortened stirrer shaftspowerful transmission of up to 90Ncmexcellent chemical resistanceall products which are exposed to the medium do not contain any metalsno grease required / save to run dryhigh speed of up to max. 1.500rpmdrive shaft fixed for your safetyhigh durabilityeasy disassembly of all parts for cleaningMagnetic Stirrer Heads P-MRK | For diam. stirring rod mm: 10, Height mm: 145, Joint size NS: 45/40
€1.104,85
Copyright © 2024 - Achrom nv - BE 0445.025.508 | Algemene voorwaarden | Cookiebeleid | Privacybeleid | Handcrafted by CrayonCru®