Please wait

Your message is being sent

An error occurred

65%
32-well PCR rack
32-well PCR rack
Brand: Heathrow Scientific LLCFor sampling and storage of PCR tubes. This rack accommodates individual 0.2 ml tubes, strips of 8, as well as 32-place assay plates (8x4).With removable, hinged lidEmbossed numbers and letters for easy identificationStackableAutoclavable
€91,40
€31,99
55%
96-well plate Nunc™ Edge 2.0, with flat bottom, PS | Description: without lid, Colour: Clear, Surface: Non-treated
96-well plate Nunc™ Edge 2.0, with flat bottom, PS | Description: without lid, Colour: Clear, Surface: Non-treated
Brand: Thermo Elect.LED GmbH (Nunc)Available in 10 variantsMinimize plate evaporation through the uniquely engineered design of Thermo Scientific™ Nunc™ Edge-96 Well Plate. The edge plate is engineered for optical superiority allowing your automated imaging systems to operate efficiently. The plates are made of clear polystyrene for excellent optical properties making it ideal for optical measurementsFeatures:Reduced Edge Effect virtually eliminates evaporation in lengthy incubationsOverall plate evaporation rate reduced to
€298,00
€134,10
55%
Accessories for LLG-uniPERISTALTICPUMP 1 and 3 | Description: Pumphead with PharMed® tubing ID 2 mm, For: LLG-uniPERISTALTICPUMP 1
Accessories for LLG-uniPERISTALTICPUMP 1 and 3 | Description: Pumphead with PharMed® tubing ID 2 mm, For: LLG-uniPERISTALTICPUMP 1
Brand: LLG LabwareAvailable in 9 variants
€55,00
€24,75
25%
Accessories for Orbital shaker LLG-uniSHAKER 25 | Description: Adhesive rubber mat, blue, 150 x 150 x 3 mm
Accessories for Orbital shaker LLG-uniSHAKER 25 | Description: Adhesive rubber mat, blue, 150 x 150 x 3 mm
Brand: LLG LabwareAvailable in 11 variants
€60,00
€45,00
20%
Adhesive Mats Sticky Mat | Description: 1 mat of 30 sheets, Colour: blue
Adhesive Mats Sticky Mat | Description: 1 mat of 30 sheets, Colour: blue
Brand: Ergomat SP.z o.o.Available in 5 variantsThe Sticky Mat provides a fast, convenient, reliable way to clean shoe soles or other items before entering a clean and sanitary area. Sticky Mats significantly reduce traffic-borne contaminants.Each Sticky Mat consists of a stack of tear-off adhesive polyethylene sheets, effectively capturing dirt and dust from foot-traffic and equipment wheels before they enter controlled environments. A clear release sheet protects the top sheet of the sticky mat until it is ready to use. The corner tabs are consecutively numbered to show the number of remaining sheets, thereby helping you to keep track of the number of sheets remaining and preventing multiple sheets being removed at once.Ergomat White Sticky Mats are produced in an 46 x 114 cm sheet, sold in pads of 30 sheets, with 10 pads per box (300 sheets total.)
€99,00
€79,20
Air valves Generation 2.0 for SafetyCaps | Type: Air valves 2.0 (refill pack of 10), Flow rate amount ml/min: 400
Air valves Generation 2.0 for SafetyCaps | Type: Air valves 2.0 (refill pack of 10), Flow rate amount ml/min: 400
Brand: SCAT Europe GmbHAvailable in 4 variantsThread size UNF 1/4" 28GLuer Lock adapterPTFE FilterValve membrane blocks vapours and opens at negative pressureIt is recommended to replace the valve every 6 monthsWith change indicator and labelling field for timely change
€219,00
50%
Aspirator LLG-uniVACUUSYS | Type: LLG-uniVACUUSYS, Plug type: EU
Aspirator LLG-uniVACUUSYS | Type: LLG-uniVACUUSYS, Plug type: EU
Brand: LLG LabwareAvailable in 2 variantsLLG-uniVACUUSYS Vacuum Aspiration System with integrated vacuum pump and vacuum controller is ideally suited for aspirating liquids in Life Science applications, e.g. the removal of media from cell cultures, aspiration of supernatants after centrifugation, or the removal of wash solutions from Immuno assay plates. The set vacuum is automatically re-adjusted in case of deviations.Integrated vacuum pump with vacuum controlEasy to useSelf-closing connectors for quick installation and prevention of liquid or aerosol escapeLiquid level sensor, prevents liquid overflowAutoclavable waste collection bottle and nozzlePlease order compatible 4l replacement bottle with 7.048 064.Scope of supply: Vacuum Aspiration System with integrated vacuum pump, 4 liter waste collection bottle, single channel needles and 8-channel needle aspirator handles, single channel and 8-channel adaptor for 200 µl pipette tips, single channel adaptor for 1000 µl pipette, tubing and quick-connectors
€1.270,00
€635,00
45%
Baffled Wide-mouth bottles, GLS 80®, DURAN®, with screw cap | Nominal capacity: 1000 ml, Ø: 101 mm, Neck int. Ø: 65 mm
Baffled Wide-mouth bottles, GLS 80®, DURAN®, with screw cap | Nominal capacity: 1000 ml, Ø: 101 mm, Neck int. Ø: 65 mm
Brand: DWK Life Sciences GmbH (Duran)Available in 3 variantsBaffled Wide-mouth bottle with three vertical baffles in the inner surface of the GLS 80® bottles which disrupt a swirling motion. The baffles improve the top-to-bottom circulation and produce a greater radial mixing. The baffles also offer other advantages such as suppressing the formation of a central vortex, and reducing dead-zones where mixing does not occur.Compatible with both the DURAN® GLS 80® magnetic stirrers, and other magnetic stir barsManufactured from DURAN® borosilicate 3.3 glassFully autoclavableThe wide 65 mm inner diameter of the GLS 80® wide mouth provides easy access to the contents, or for cleaningThe baffles are moulded into the glass side wall of the bottles and form a continuous, smooth inner surface making clean up easyCompatible with full range of wide mouth GLS 80® connection cap systems for liquid addition or removal when mixing with stir bars.The bottles feature an easy-to-read graduated volume scaleWith pouring ringApplicationsAeratingDissolvingEmulsifyingHomogenizingMixingSuspending
€50,40
€27,72
40%
Cell and Tissue Culture Dishes, treated, PS, sterile | Ø mm: 68, Height mm: 15, culture surface cm2: 36.3
Cell and Tissue Culture Dishes, treated, PS, sterile | Ø mm: 68, Height mm: 15, culture surface cm2: 36.3
Brand: Guangzhou JET Bio-FiltrationAvailable in 9 variantsDishes with treated surface, suitable for adhesion cells.Easy and secure stackingSterilized by gamma irradiationPyrogen-free
€164,80
€98,88
35%
Cell culture flasks, treated, PS, sterile | Working volume ml: 20, culture surface cm2: 12.5, Neck: angled
Cell culture flasks, treated, PS, sterile | Working volume ml: 20, culture surface cm2: 12.5, Neck: angled
Brand: Guangzhou JET Bio-FiltrationAvailable in 13 variantsThese cell culture flasks with treated surfaces for the cultivation of adherent cells are available with different growth areas from 12.5 to 300 cm². Available with vented or plug-seal caps made from polyethylene. Vented caps contain a 0.22 µm hydrophobic filter to allow gas exchange and minimize risk of cross-contamination. Plug-seal caps can be used in closed systems, providing a liquid and gas sheer seal, but by simply unscrewing the cap one quarter of a turn, this cap can also be used in an open system.Innovative angled neck design offers good pipette and cell scraper accessUpper triangular and wider base shape provides stabilityStackableSpecial writing area near the neckEngraved graduation on both flask sidesSterilized by gamma irradiationPyrogen-freeIndividually packed in resealable outer packaging with zip fastenerMaterial: Polystyrene
€138,88
€90,27
50%
Cell culture inserts 2in1, for 6-well-, 12-well- and 24-well-plates | For: 24-well-plates, Membrane: PET, Pore size µm: 0.4
Cell culture inserts 2in1, for 6-well-, 12-well- and 24-well-plates | For: 24-well-plates, Membrane: PET, Pore size µm: 0.4
Brand: BRAND GMBH + CO.KGAvailable in 36 variantsThe BRAND Insert 2in1 is a cell culture insert used for skin model production, 3D epithelium cultures, chemotaxis analyses, transmigration assays, transport and polarity studies.cellGrade™ plus surfacesBIO-CERT Cell culture: free of pyrogens, DNA, DNase/RNase, free of cytotoxic substancesTo be used as a hanging or standing insertSterility Assurance Level (SAL) of 10-6Suitable for 2D and 3D cell culturesThree point mountingFeets for standing use ensure an approx. 1 mm gap between membrane and bottom of the dish or wellRemovable hook for standing use
€300,30
€150,15
50%
Chemical Protection Glove Ultranitril 381, Nitrile | Glove size: 10, Length: 355 mm, Thickness: 0.85 mm
Chemical Protection Glove Ultranitril 381, Nitrile | Glove size: 10, Length: 355 mm, Thickness: 0.85 mm
Brand: MAPA GmbHAvailable in 5 variantsChemical protective glove made of nitrile with glued cotton liner for long term comfort. Anatomic shape. Z-pattern-profile for safe grip of wet things. More dexterity due to the glued cotton knit lining, which offers excellent comfort and thermal insulation. Excellent resistance against oils, greases and many solvents.1 pair per pack.
€16,90
€8,45

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.