Please wait

Your message is being sent

An error occurred

Cable m
Description
Length
Sensor type
Type
Ø
Accessories for Laboratory conductivity meter 703 | Type: ZU 6945
Accessories for Laboratory conductivity meter 703 | Type: ZU 6945
Brand: Knick ElektronischeAvailable in 2 variantsZU 6985: 4-pole conductivity probe with integral temperature sensorZU 6945: Calibration solution for analysis and control of cell constant (1 ampoule produces 1 litre of 0.1 N salt solution)
€51,00
Calibration solution for Conductivity meter SD 325 CON | Description: Conductivity solution 1413 µS/cm, 90 ml, NIST
Calibration solution for Conductivity meter SD 325 CON | Description: Conductivity solution 1413 µS/cm, 90 ml, NIST
Brand: Tintometer GmbHAvailable in 4 variants
€19,80
Conductivity cell for SensoDirect Con 110 / 150 | Conductivity:
Conductivity cell for SensoDirect Con 110 / 150 | Conductivity:
Brand: Tintometer GmbH
€71,80
Conductivity meter CT 830 | Type: CT 830 Set, Description: Conductivity meter incl. conductivity sensor AT 830 C
Conductivity meter CT 830 | Type: CT 830 Set, Description: Conductivity meter incl. conductivity sensor AT 830 C
Brand: Xylem Analytics Germany (EBRO)Available in 2 variantsWith automatic measuring range switching.The meter is the ideal choice for determination of conductivity, salinity and temperature and combines the features for mobile application in the field with the precision and comfort of a laboratory meter. In the standard version the meter CT 830 is supplied with conuctivity sensor AT 830 C and 1.50 m cable. It is ideally suited for overall applications in the field and in laboratories. Two parallel, largely dirt-insensitive graphite electrodes, the integrated temperature sensor for parallel temperature measurement, an automatic temperature compensation and the wide measuring range are the benefits of the conductivity sensor.Scope of supply: Meter incl. conductivity sensor, calibration solution 0,1 N / KCL 1288 µs, case
€976,00
30%
Conductivity meter FiveGo™ F3 | Type: F3-Field kit
Conductivity meter FiveGo™ F3 | Type: F3-Field kit
Brand: Mettler-Toledo Online GmbHAvailable in 3 variantsPortable conductivity meter for field work.Measurement made easy: A large, well-structured display, intuitive button arrangement and simple menu ensure measurements can be performed in just a few clicksErgonomic design for one handed operation: Thanks to its ergonomic design, handling the FiveGo is a comfortable experience. The foldable stand provides optimal viewing on flat surfacesIP67 Water and dustproof: The IP67 waterproof protection makes the FiveGo portables able to withstand wet and demanding environmentsSupplied with:F3-Meter: Meter onlyF3-Standard kit: Meter with LE703 sensorF3-Field kit: Meter with LE703 sensor, carrying case
€620,00
€434,00
Conductivity meter Portavo 902 Cond/904 Cond/904 X Cond | Type: 904 X Cond
Conductivity meter Portavo 902 Cond/904 Cond/904 X Cond | Type: 904 X Cond
Brand: Knick ElektronischeAvailable in 3 variantsPortavo 902 CondThe basic version for mobile conductivity measurementRobust, intuitive portable device for routine daily measurements in laboratories and processesA sensor quiver protects the sensor from drying out or being damaged in daily useThe high-performance polymer housing ensures low water absorption and high impact resistanceOver 1000 hours of measurement with a single set of batteries (4 x AA)Memosens sensors and analog sensors can be used on the same deviceThe mineral glass display is perfectly readable even after yearsPortavo 904 Condas Portavo 902 Cond, additionally with:Li-ion batteryData logger with 5,000 valuesMicro USB port and Paraly SW 112 softwarePortavo 904 X Condas Portavo 904 Cond, additionally with:Conductivity measurement with ATEX approval for measurements up to Zone 0/1. Ideal for applications in the process industry. For the first time, Portavo enables direct on-site testing of process measuring points.The new MemoLog function allows the user to log calibration data from various Memosens measuring points
€1.928,00
Conductivity meter ProfiLine Cond 3310 | Type: Cond 3310 Set 1, Description: Case set including conductivity probe TetraCon 325 and accessories
Conductivity meter ProfiLine Cond 3310 | Type: Cond 3310 Set 1, Description: Case set including conductivity probe TetraCon 325 and accessories
Brand: Xylem Analytics Germany (WTW)Available in 2 variantsComfortable and versatile conductivity meter with integral, time controlled, data logger and 5000 GLP-compliant record memory for extended data collection. Menu controlled, with backlit, graphics display for comfortable, safe operation. Wide range of conductivity cells attachable. GLP-supporting functions, enhanced choice of cell constants, automatic and manual temperature compensation (which can be switched off) with linear and non-linear functions for pure water and natural waters acc. to EN 27888.
€1.297,00
Conductivity meter SD 325 CON | Type: SD 325 CON (Set 2)
Conductivity meter SD 325 CON | Type: SD 325 CON (Set 2)
Brand: Tintometer GmbHAvailable in 3 variantsThe portable instrument with data logger is ideal for determining electrical conductivity in aqueous media. With a simple keystroke, further parameters such as TDS, salinity or resistance can be selected and conveniently read off. The selection of different measuring cells allow the determination of low (< 200 µS/cm) and very high conductivities (< 1000 mS/cm) with highest precision.Automatic recognition of conductivity standardsAlarm function with adjustable limit valuesAuto hold functionSelectable reference temperature (20 °C / 25 °C)Automatic temperature compensationBattery status indicatorLow power consumptionData transfer and evaluation via software possibleScope of supply:SD 325 CON (Set 1): Conductivity meter, protective covering, transport case, 4-pol graphite electrode (diam. 12 mm, < 200 mS/cm), conductivity standards, batteries, manualSD 325 CON (Set 2): Conductivity meter, protective covering, transport case, 4-pol graphite electrode (diam. 16 mm, < 1000 mS/cm), conductivity standards, batteries, manualSD 325 CON (Set 3): Conductivity meter, protective covering, transport case, 2-pol stainless steel electrode (diam. 10 mm, < 200 µS/cm, pure water), flow through cell for pure water, batteries, manual
€1.000,20
Conductivity meter SensoDirect Con 110 | Type: SensoDirect Con 110
Conductivity meter SensoDirect Con 110 | Type: SensoDirect Con 110
Brand: Tintometer GmbHThe battery operated SensoDirect Con 110 is a compact and versatile meter. The unit is extremely easy to use and is equipped as standard with a casing and built-in electrode holder. It is equipped with a LC display showing two or three decimal places (manual measuring range selection) and a measuring range either of 0.001 to 1.999 or 0.01 to 19.99 mS/cm. The SensoDirect Con 110 can be calibrated and adjusted using a potentiometer. It is fitted with a 4 pole connector as standard.Scope of supply: Meter, battery, conductivity probe, in case
€191,10
Conductivity meter Seven2Go™ S3 | Type: S3-Standard kit
Conductivity meter Seven2Go™ S3 | Type: S3-Standard kit
Brand: Mettler-Toledo Online GmbHAvailable in 4 variantsPortable routine model for conductivity measurement.New, intuitive menu structure with fast and easy T-Pad navigationRobust design with IP67 protection for use in harsh and demanding environmentsIntelligent Sensor Management (ISM®) functionality reduces the risk of errorsEasy 1 point calibration with option of manual cell constant entry3 predefined standards and 1 user defined standardAutomatic, manual and time dependant endpoint recordingData memory storage for 200 data pointsPower requirements: 4 x 1.5 V AA or 1.3 V NiMH accumulatorsScope of supply:S3-Meter: Includes instrument, electrode clip, operating instructions, quick guide, test certificate, declaration of conformity, batteriesS3-Standard kit: As S3-Meter, but also with InLab 738-ISM and sachets of conductivity standards 1413 µS/cm and 12.88 mS/cmS3-Field kit: As S3-Standard kit, but also with bottles for calibration, uGo™ carrying caseS3-Bioethanol kit: As S3-Field kit, but also with InLab 725 instead of InLab 738-ISM
€905,00
Conductivity meters Eutech™ CON150 / CON450 | Type: CON45003K
Conductivity meters Eutech™ CON150 / CON450 | Type: CON45003K
Brand: Thermo Elect.LED GmbH (Eutech)Available in 2 variantsBest value for a waterproof conductivity meter.Large, three line LCD, view conductivity or TDS measurement with temperature as well as cell efficiencyBuilt-in memory function, stores up to 150 measurements along with temperatureAdjustable temperature coeffcient, set to 0.0 % to meet USP methods for non-compensated measurementsAcoustic indication of necessary recalibrationPower with AA batteries or use optional AC adapterCalibrate using automatically recognized standards or manually, to a single point across all ranges or to multiple points (one calibration point per each conductivity range)Ready indicator, manual or automatic measurement hold feature and optional automatic shut-off functionAdjustable conductivity-to-TDS conversion factor, from 0.4 to 1.0Includes innovative Grip-Clip™, quickly and easily secures the electrode to your beaker or containerAdditional features CON450Backlit displayBuilt-in memory function, stores up to 500 data sets, USB and RS232 outputBuilt-in real-time clock stamps stored data and calibration data with time and date, meets standards for GLP (Good Laboratory Practices)Scope of supply: Meter, conductivity cell (K =1.0), Grip Clip™, 2 x AA batteries, hard carry case, calibration solutions (1 x 1413 µS, 12.88 mS, 84 µS KCL Standard Solutions and 1 x Deionised (Rinse) Water, 60 ml each). CON45003K additionally with USB cable
€795,00
Conductivity meters Eutech™ COND 6+ | Type: COND 6+
Conductivity meters Eutech™ COND 6+ | Type: COND 6+
Brand: Thermo Elect.LED GmbH (Eutech)Available in 2 variantsSturdy and economical, ease-of-use with high performance. The handy meter is IP54 splashproof, and comes with a conductivity electrode with automatic temperature compensation function.5-point-calibration with ±1 % full scale accuracyOption of quick, easy automatic calibration or customised, near-to-sample manual calibrationAuto-Ranging for conductivity / TDS measurements for fast response and best resolution over wide measurement rangeEasy-to-read displayAvailable in kit version with hard carrying caseAutomatic switch-offScope of supply: COND 6+: Conductivity meter, conductivity electrode CONSEN91B, electrode holder Grip-Clip, batteriesCOND 6+K: Conductivity meter, conductivity electrode CONSEN91B, 1 x each 84 μS/cm, 1413 μS/cm and 12.88 mS/cm KCl calibration solution, 1 x deionised rinse water, electrode holder Grip-Clip, batteries, hard carrying case
€466,00

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.