Glass Stirrer Bearings, PTFE | For diam. stirring rod mm: 8, Overall length mm: 90, Thread GL: 25
Brand: Bohlender GmbHAvailable in 3 variantsCombination of a borosilicate glass piece with ground joint, an interior PTFE shaft guide with integrated special gasket and a GL screw cap made of PPS. The special gasket made of PTFE and an FPM o-ring which is compressed by a GL screw cap provide a good sealing of the stirrer shaft. This gasket can be exchanged after wearing. Suitable for vacuum, perfect bearing for stirrer shafts made of stainless steel, glass and for BOLA Stirrer Shafts.Glass Stirrer Bearings, PTFE | For diam. stirring rod mm: 8, Overall length mm: 90, Thread GL: 25
€92,18
KPG stirrer bearings, DURAN® | Type: HT 10, Ø mm: 10, Height mm: 65
Brand: DWK Life Sciences GmbH (Duran)Available in 7 variantsInterchangeable. Bearing surface ground, polished.With or without standard ground cone NS 29/32.KPG stirrer bearings, DURAN® | Type: HT 10, Ø mm: 10, Height mm: 65
€123,06
KPG stirrer shafts, DURAN® | Type: WS 10, For neck diam. mm: 25, Length mm: 370
Brand: DWK Life Sciences GmbH (Duran)Available in 6 variantsDURAN®. Interchangeable. Bearing surface ground and polished.KPG stirrer shafts, DURAN® | Type: WS 10, For neck diam. mm: 25, Length mm: 370
€91,78
Stirrer bearings with cooling jacket, DURAN® tubing | For diam. stirring rod mm: 10, Cone NS: 29/32
Brand: Lenz-Laborglas GmbH & Co. KGAvailable in 2 variantsMade of DURAN® tubing. Stirrer bearings with NS cone and cooling water connections (thread GL14), bearing surface ground and polished.Stirrer bearings with cooling jacket, DURAN® tubing | For diam. stirring rod mm: 10, Cone NS: 29/32
€178,64
Stirrer bearings with dynamic double seal | For diam. stirring rod mm: 10, NS: 45/40
Brand: Lenz-Laborglas GmbH & Co. KGAvailable in 4 variantsStirrer bearings for applications under vacuum or under slight overpressure. With extended guidance for reduced vibrations and a longer lifetime. Material: borosilicate glass 3.3 (closure), PTFE (sealings)Stirrer bearings with dynamic double seal | For diam. stirring rod mm: 10, NS: 45/40
€354,23
Stirrer bearings with GL male thread, DURAN® tubing | Ø agitator shaft mm: 16, Length mm: 85 ± 3, Thread GL: 32
Brand: Lenz-Laborglas GmbH & Co. KGAvailable in 3 variantsMade of DURAN® tubing. Other materials used: PTFE (bearing), silicone (gasket) and stirrer guides, GL male thread. Cone size 29/32. Guide bore 10mm i.d.Stirrer bearings with GL male thread, DURAN® tubing | Ø agitator shaft mm: 16, Length mm: 85 ± 3, Thread GL: 32
€168,06
Stirrer Bearings, PTFE | For diam. stirring rod mm: 10, Overall length mm: 80, Thread GL: 25
Brand: Bohlender GmbHAvailable in 9 variantsThe sealing rings on these bearings ensure a perfect sealing. The ground joint no longer sticks, the danger of breaking is reduced and the cone can be removed easily from the socket. A special gasket made of PTFE and an FPM o-ring which is compressed by a GL screw cap provide a good sealing of the stirrer shaft. This gasket can be exchanged after wearing. Suitable for vacuum, perfect bearing for stainless steel, glass and BOLA Stirrer Shafts.Stirrer Bearings, PTFE | For diam. stirring rod mm: 10, Overall length mm: 80, Thread GL: 25
€54,78
Stirrer with stirrer bearings, DURAN® tubing | Type: Closure, thread GL 25, cone NS 29/32
Brand: Lenz-Laborglas GmbH & Co. KGAvailable in 8 variantsMade of DURAN® tubing. For round bottom flasks 250 to 2000ml. Stirrer shaft, with PTFE stirrer blade and fixing screw. Seals vacuum stirring apparatus gas-tight to 10-3 mbar up to a permanent load of 800rpm.Stirrer with stirrer bearings, DURAN® tubing | Type: Closure, thread GL 25, cone NS 29/32
€65,40
Copyright © 2025 - Achrom nv - BE 0445.025.508 | General terms | Cookiebeleid | Privacybeleid | Handcrafted by CrayonCru®