Membrane filter 19 mm, Nuclepore™, Track-Etched, PC | Pore size µm: 0.20, Ø mm: 19
Brand: Cytiva Europe GmbHTrack-etched for highly defined pore size and high pore densityTreated with PVP to render it hydrophilicLow extractables, minimizing sample contamination riskHigh chemical resistance and good thermal stability for a wide range of sample typesLow, consistent ash and low tare weightsSmooth flat surface for high particle visibilityMembrane filter 19 mm, Nuclepore™, Track-Etched, PC | Pore size µm: 0.20, Ø mm: 19
€85,16
Membrane Filter Dispenser, Microsart® e.motion | Type: Foot switch for Microsart™ e.motion
Brand: Sartorius Lab InstrumentsAvailable in 3 variantsWith this dispenser you can choose between three operating modes. Operation by push button, sensor or foot switch. With the model 16713----BO (Art no. 6.289 058), wireless operation is also possible only with battery.Capacity for up to 250 membrane filtersCleaning with standard disinfectants possibleLow weight and convenient handle for easy transportMembrane Filter Dispenser, Microsart® e.motion | Type: Foot switch for Microsart™ e.motion
€90,60
Membrane filter PES | Ø mm: 47, MWCO da: 10000
Brand: Sartorius Lab InstrumentsAvailable in 7 variantsCircular filter for ultrafiltration for sample concentration in stirring cells. The PES diaphragm offers a high flow rate.Membrane filter PES | Ø mm: 47, MWCO da: 10000
€159,00
Membrane filter PES, hydrophil | Ø mm: 50, Pore size µm: 0.20
Brand: Sartorius Lab InstrumentsAvailable in 10 variantsWhite. They are recommended for the filtration of aqueous solutions and proteins. Due to their low content of extractable substances, they are suitable for sample preparation in environmental analysis.High flow ratesLow non-specific protein adsorptionHigh resistanceMembrane filter PES, hydrophil | Ø mm: 50, Pore size µm: 0.20
€235,00
Membrane Filter, hydrophobic, PTFE | Ø mm: 25, Pore size µm: 0.20, Sterile: no
Brand: Hahnemühle FineArt GmbHAvailable in 5 variantsMade entirely of PTFE (polytetrafluorethylene), reinforced by Polypropylene net.Permanently hydrophobicAllowing passage of air even at low differential pressureResistant to almost all chemicals, very strong acids, cryoliquids, alkalis, aggressive organic solventsMust be pre-wetted with an organic solvent, such as ethanol, methanol or isopropanol, before filtration of aqueous samplesMax. Temperature 145 °CMembrane Filter, hydrophobic, PTFE | Ø mm: 25, Pore size µm: 0.20, Sterile: no
€278,50
Membrane Filter, mixed cellulose ester | Ø mm: 47, Pore size µm: 8.00, Sterile: -
Brand: Hahnemühle FineArt GmbHAvailable in 5 variantsRecommended for clarification and sterilisation of aqueous solutions, microbiological analysis and particle counts.Qualified for aqueous solutions (pH 4-8), hydrocarbons and some dilute solventsHigh non-specific adsorption: 160 µg/cm2 for gamma globulin and pore size 0.2 µm (decreases with increasing pore size)High mechanical stability, ideal for gravimetrical measurementsMaximum temperature 180 °CMembrane Filter, mixed cellulose ester | Ø mm: 47, Pore size µm: 8.00, Sterile: -
€181,90
Membrane filters Cellulose acetate PORAFIL®CA | Ø mm: 25, Pore size µm: 0.20
Brand: Macherey-Nagel GmbH & Co. KGAvailable in 24 variantsThese membranes of cellulose acetate have a low protein binding capacity and are suited for aqueous and alcoholic media. The membranes are hydrophilic and can be used for hot gases up to 180 °C. They can be sterilised.Membrane filters Cellulose acetate PORAFIL®CA | Ø mm: 25, Pore size µm: 0.20
€126,00
Membrane filters Durapore®, PVDF | Ø mm: 142, Pore size µm: 0,10, Thickness mm: 0,125
Brand: Millipore GmbHAvailable in 19 variantsWhite. For filtration of biological solutions.HydrophilVery low protein bindingAutoclavableMembrane filters Durapore®, PVDF | Ø mm: 142, Pore size µm: 0,10, Thickness mm: 0,125
€527,00
Membrane filters EZ-Pak, mixed cellulose ester | Ø mm: 47, Pore size µm: 0,45, Colour: white
Brand: Millipore GmbHAvailable in 5 variantsWhite. For general microbiological analysis.SterileIndividually-packedGriddedWith imprint of article numbers, batch numbers, pore sizes and sequential numbers4 x 150 membrane filtersMembrane filters EZ-Pak, mixed cellulose ester | Ø mm: 47, Pore size µm: 0,45, Colour: white
€683,80
Membrane Filters Microsart™ e.motion | Pore size µm: 0.45, Colour: green/dark green, Ø mm: 50
Brand: Sartorius Lab InstrumentsAvailable in 16 variantsThe membrane filters suitable for use in the Microsart™ e.motion are individually sterile-sealed,without protective paper on top of each filter, in a specially designed individual package on a band. For complete traceability, the membrane filter type, diameter, lot number and a unique serial number are printed on the package of each membrane filter unit. Specially developed pore structures of the 0.45 ìm high Flow membrane filters permit faster filtration based on their high flow rates and throughputs.All Microsart membrane filters are "multi-fit" and can be used in all standard dispenser systems.The membrane filters have a diameter of 47 mm or 50 mm, and are white, green or grey with a high-contrast 3.1 mm grid.Membrane Filters Microsart™ e.motion | Pore size µm: 0.45, Colour: green/dark green, Ø mm: 50
€387,00
Membrane filters Nitrocellulose PORAFIL®NC | Ø mm: 25, Pore size µm: 0.20
Brand: Macherey-Nagel GmbH & Co. KGAvailable in 16 variantsPORAFIL® NC membranes are made from cellulose nitrate. They are easily wettable and suited for filtration of aqueous solutions. In dry atmosphere these membranes are thermally stable to 125 °C and can be autoclaved at 121 °C.Membrane filters Nitrocellulose PORAFIL®NC | Ø mm: 25, Pore size µm: 0.20
€57,40
Membrane filters Polycarbonate PORAFIL®RC | Ø mm: 47, Pore size µm: 0.4
Brand: Macherey-Nagel GmbH & Co. KGAvailable in 3 variantsPolycarbonate membranes are mainly used for the determination of AOX.Membrane filters Polycarbonate PORAFIL®RC | Ø mm: 47, Pore size µm: 0.4
€385,00
Copyright © 2025 - Achrom nv - BE 0445.025.508 | General terms | Cookiebeleid | Privacybeleid | Handcrafted by CrayonCru®