Accessories for Heating bath HBR 4 control | Description: Set of rings H 240
Brand: IKA-Werke GmbH & Co.KGAvailable in 2 variantsSet of rings H 240: To cover the heating bath.Intermediate base H 159: Allows insertion of vessels into the bath, without affecting the stirrer motion.Accessories for Heating bath HBR 4 control | Description: Set of rings H 240
€642,00
Heating bath HB 1500 / HB 1500-S | Type: HB 1500, Capacity of the bath litres: 2, Min. operating temperature RT + °C: 20
Brand: Juchheim GmbH & Co.KGAvailable in 6 variantsThe heating bath HB 1500 is developed for varied tasks. As bath filling water, oils and sand is used. Different sizes are deliverable! The device has an integrated temperature controller with microprocessor. It is freely programmable and has also self optimization function and rampfunction!Microprocessor controller with 4-digits 7-segment display, 10 mm high, green,With selfoptimization and rampfunctionMeasurement and control range +20,0 to +250,0°COn-Off switch is light up greenSetting of heat power from 1 to 99%Irreversible rapid shut-down when reaching the security temperatureHeating bath HB 1500-SEquipment such as HB 1500, also with safety on separate microprocessor controller and an internal temperature sensor. Exceeding the safety temperature, the heating is switched off completely. The over-temperature shutdown >10K + reference deleted.Heating bath HB 1500 / HB 1500-S | Type: HB 1500, Capacity of the bath litres: 2, Min. operating temperature RT + °C: 20
€1.034,00
Heating Bath HB Digital | Type: HB digital, Capacity of the bath litres: 4
Brand: IKA-Werke GmbH & Co.KGCompact and ergonomic heating safety bath for all tempering media.Ergonomic handlesKey button to lock heating bath temperatureClear, black-and-white displayPermanent set-point/actual temperature display3 different safety operating modesUSB interfaceHeating Bath HB Digital | Type: HB digital, Capacity of the bath litres: 4
€1.699,00
Heating Bath HB eco | Type: HB eco, Capacity of the bath litres: 4
Brand: IKA-Werke GmbH & Co.KGCompact and ergonomic heating safety bath.Ergonomic handlesClear, black-and-white displayAlternating set-point/actual temperature displayUSB interfaceHeating Bath HB eco | Type: HB eco, Capacity of the bath litres: 4
€1.362,00
Heating bath HBR 4 control | Type: HBR 4 control, Capacity of the bath litres: 4
Brand: IKA-Werke GmbH & Co.KGThe heating bath is noted for:Cylindrical bath shapeHeating elements integrated into the bath baseHeat transfer media can be low-viscous oil (50 mPas) or waterTwo carry handlesInfinitely variable safety temperature limiter according to DIN 12877Double-jacketed mantle protection against burnsDigital display for target, actual and safety temperatures as well as speedIntegrated magnetic stirrer drive to circulate the tempering fluid, allowing for better heat distribution in the bathRS 232 interfaceHeating bath HBR 4 control | Type: HBR 4 control, Capacity of the bath litres: 4
€4.573,00
Heating bath liquid | Temp. range max. °C: -30 ... +90, Capacity l: 20
Brand: Heidolph InstrumentsAvailable in 3 variantsHeating bath liquid | Temp. range max. °C: -30 ... +90, Capacity l: 20
€554,00
Heating bath liquid, BUDDE | Container: 5 litres
Brand: Buddeberg GmbHUse:BUDDE heating bath liquid can be used continuously as a heating medium up to approx. 170 °C. Higher temperatures (below flash point) are possible, but will result in rapid darkening. The low pour point allows the bath liquid also to be used as a cooling medium. Mixtures with 10 % to 30 % water achieve best results.The crucial advantages of BUDDE heating bath liquid compared tothe oils or other organic liquid mainly used are:accidental spillage of water into the bath does not lead to dangerous spitting at temperatures over 100 °C, as the water dissolves in the heating bath liquid and subsequently evaporates safelyBUDDE heating bath liquid can easily be rinsed away with water which eases cleaning of laboratory equipment, e.g. distillation flasks, and also bench or floor if the bath liquid is accidentally spilled.BUDDE heating bath liquid does not foam when mixed with water.Viscosity on addition of water:BUDDE heating bath liquid is quite viscous at ambient or low temperatures, and therefore sometimes difficult to dispense. The addition of 10-20 % water reduces the viscosity and enables easier handling. If the mixture is then heated to 100 °C, the water evaporates without boiling. Further heating is only shortly delayed by this. Before next heating, water can be added again.Water solubility: BUDDE heating bath liquid can be mixed with water in any ratio. The hardness of the water has no effect on the bath liquid.Heating bath liquid, BUDDE | Container: 5 litres
€189,00
Oil bath for rotary evaporators | Capacity of the bath litres: 5
Brand: Cole-Parmer Ltd. (Stuart)This precise digital bath is specifically designed to be used with the Stuart rotary evaporators to give maximum efficiency for the smallest footprint. The clear LED digital display shows the actual bath temperature or the set temperature. Outer case is made from chemically resistant polypropylene.Digital temperature display, display resolution 1 °C, temperature control ±1.5 °C (water), ±3 °C (oil)Corrosion resistant bowlEasy to cleanCool touch outer casePlease note plastic coated glassware is limited to 80°C and therefore unsuitable for use with the oil bath.Oil bath for rotary evaporators | Capacity of the bath litres: 5
€1.166,50
Quartz Sand | Weight kg: 1
Brand: Funke- Dr. N. GerberAvailable in 2 variantsAnnealed quality, 0.1 to 0.5 mm grain size.Quartz Sand | Weight kg: 1
€10,00
Sand Baths with Performance Control and Thermostatic Controller | Type: ST 82, Min. operating temperature RT + °C: 50, Max. operating temperature °C: 300
Brand: Harry Gestigkeit GmbHAvailable in 11 variantsFor continuous operation. Electrical sand baths with thermostatic temperature control and separate power controller for performance adjustment to the heating requirements. Anodised aluminium alloy hotplate. Excellent uniform temperature distribution over the entire heating surface. Asbestos free. The sand bath frame is tightly screwed onto the hotplate so that the sand is in direct contact with the hotplate. Useful depth 50mm. Stainless steel controller housing, with painted central section. Height-adjustable feet. Connection cable approximately 1.7m. With earthed plug for 230V supplies up to 3300W. A 400V 3-phase model is also available.Sand Baths with Performance Control and Thermostatic Controller | Type: ST 82, Min. operating temperature RT + °C: 50, Max. operating temperature °C: 300
€1.574,00
Sandbaths with Performance Control | Type: SD 7, with EU-plug, Min. operating temperature RT + °C: 5, Max. operating temperature °C: 370
Brand: Harry Gestigkeit GmbHAvailable in 4 variantsFor continuous operation. Electrical sand baths with thermostatic temperature control and separate power controller for performance adjustment to the heating requirements. Anodised aluminium alloy hotplate. Excellent uniform temperature distribution over the entire heating surface. Asbestos free. The sand bath frame is tightly screwed onto the hotplate so that the sand is in direct contact with the hotplate. Useful depth 50 mm. Stainless steel controller housing, with painted central section. Height-adjustable feet. Connection cable approximately 1.7 m. With earthed plug for 230 V supplies up to 3300 W. A 400V 3-phase model is also available.Sandbaths with Performance Control | Type: SD 7, with EU-plug, Min. operating temperature RT + °C: 5, Max. operating temperature °C: 370
€1.134,00
Copyright © 2025 - Achrom nv - BE 0445.025.508 | General terms | Cookiebeleid | Privacybeleid | Handcrafted by CrayonCru®