Sample cuvettes for Turbidity meter Eutech™ TN-100 | Description: Set of 4 sample cuvettes (vials)
Brand: Thermo Elect.LED GmbH (Eutech)Available in 2 variantsMade of borosilicate glass. With screw cap, fill line and indexing mark.Sample cuvettes for Turbidity meter Eutech™ TN-100 | Description: Set of 4 sample cuvettes (vials)
€118,00
Secchi Disk | Description: Secchi Disk, diam. 250 mm with eyelet without bottom line
Brand: Windaus-LabortechnikAvailable in 3 variantsFor determining the depth of visibility and light permeability of water. Sturdy design made of strong, hard-wearing plastic. Lead weight for better lowering. The approx. 15 cm high rod is fitted with an eyelet for fastening the lowering engine. The lowering line is marked in intervals of 100 cm with figures from 1 to 10 and in between additionally with line markings each 50 cm for better reading of the depth of visibility while the disk is being lowered.Lowering line, please order separately.Secchi Disk | Description: Secchi Disk, diam. 250 mm with eyelet without bottom line
€54,00
Secondary turbidity standards Gelex | Type: Set for 2100 AN, Description: 0-2 NTU, 0-20 NTU, 0-200 NTU, 200-4000 NTU, 4000-10000 NTU
Brand: HACH LANGE GmbHAvailable in 2 variantsEach set contains one sealed cuvette with the indicated concentrations.Secondary turbidity standards Gelex | Type: Set for 2100 AN, Description: 0-2 NTU, 0-20 NTU, 0-200 NTU, 200-4000 NTU, 4000-10000 NTU
€669,00
Sedimentation cone, plastic, SAN | Nominal capacity ml: 1000, Type: With screw cap
Brand: Kartell S.p.A.Imhoff pattern. DIN 12672. Transparent SAN (Styrene acrylonitrile). With screw cap for draining the contents. Temperature-resistant up to max. 85°C.Sedimentation cone, plastic, SAN | Nominal capacity ml: 1000, Type: With screw cap
€67,56
Sedimentation cones
Brand: Glaswarenfabrik Karl HechtAvailable in 2 variantsImhoff pattern, wood.Sedimentation cones
€52,65
Sedimentation cones acc. to Imhoff, borosilicate glass 3.3 | Description: Sedimentation cone
Brand: Lenz-Laborglas GmbH & Co. KGScale: up to 100ml, ring mark: at 1000ml, subdivision: 0.1 ml (0-2ml), 0.5 ml (2-10ml), 1ml (10-40ml), 2ml (20-100ml), 50ml (100-1000ml).Sedimentation cones acc. to Imhoff, borosilicate glass 3.3 | Description: Sedimentation cone
€153,33
Sedimentation cones, accessory holder | Width mm: 130, Length mm: 300, Height mm: 400
Brand: BRAND GMBH + CO.KGAcrylic/PP.For two Imhoff sedimentation cones made of glass or plastic; with and without stopcock. Compact and easy to transport even when full.Sedimentation cones, accessory holder | Width mm: 130, Length mm: 300, Height mm: 400
€131,90
Sedimentation cones, accessory holders, PVC | For: 4 Imhoff funnels with stopcock
Brand: Behr Labor-Technik GmbHAvailable in 4 variantsImhoff pattern, solid grey PVC. Stable design.Sedimentation cones, accessory holders, PVC | For: 4 Imhoff funnels with stopcock
€149,90
Sedimentation cones, accessory stand, Acrylic/PP | Width mm : 150, Length mm : 300, Height mm : 294
Brand: Kartell S.p.A.Acrylic/PP. To hold two Imhoff sedimentation cones. Compact and easy to transport even when fully loaded.Sedimentation cones, accessory stand, Acrylic/PP | Width mm : 150, Length mm : 300, Height mm : 294
€139,04
Sedimentation cones, borosilicate glass 3.3 | Type: With stopcock, Grad. ml: up to 1000
Brand: H. & K. Starke GmbHAvailable in 3 variantsImhoff pattern. DIN 12672. Graduations and inscriptions in contrasting white enamel. Ring mark at 1000ml.Sedimentation cones, borosilicate glass 3.3 | Type: With stopcock, Grad. ml: up to 1000
€160,87
Sedimentation unit set, Nalgene®, PC | Volume ml : 2000
Brand: Thermo Elect.LED GmbH (Nalge)Transparent, shockproof, with easily readable white graduations. Sedimentation and centrifuge tests for sludge quality are used in the analysis of the active sludge deposition process.Scope of delivery: Jar and cover (PC), scoop (PP), 10 x 15 ml conical centrifuge tubes (PC), with caps (PP), manual and data sheet.Sedimentation unit set, Nalgene®, PC | Volume ml : 2000
€172,00
Stand for Imhoff Sedimentation cones, PP | Description: Stand for 2 funnels
Brand: Bürkle GmbHThe stand for sedimentation funnels is used to keep, hold or store Imhoff funnels safely and reliably during sedimentation. Two funnel holders ensure that Imhoff funnels will be held safely and securely and can be placed in an absolutely vertical position. Stand with two holders for sedimentation funnels, suitable for funnels 90 mm or more in diameter. Thanks to an innovative magnet concept no clamping screws are necessary. The height of the funnel holder can be adjusted easily and flexibly with one hand. With the corresponding accessory the holders for Imhoff funnels can also be replaced by holders for all-purpose funnels.PP, chrome-plated steelAdjustable height up to 450 mmFor funnels with Ø 90 mm or moreStand for Imhoff Sedimentation cones, PP | Description: Stand for 2 funnels
€90,90
Copyright © 2026 - Achrom nv - BE 0445.025.508 | General terms | Cookiebeleid | Privacybeleid | Handcrafted by CrayonCru®