Catch nets for TeleScoop, PVC/PA - PP/PA | Type: Depth catch net, Dimensions (W x D) mm: 190 x 430, Material: PP / PA
Brand: Bürkle GmbHAvailable in 2 variantsIdeal for sampling from basins, tanks, shafts, open waters etc. The telescopic aluminium rods TeleScoop allow sampling up to 6m depth.For industries and water treatmentMesh width: 2mm up to 5mmDepth cath net, net depth: 250mmCatch nets for TeleScoop, PVC/PA - PP/PA | Type: Depth catch net, Dimensions (W x D) mm: 190 x 430, Material: PP / PA
€68,05
Chemistry scoop, PP, with rod handle | Capacity ml: 1000, Shaft diam. mm: 20, Stem mm: 1000
Brand: Bürkle GmbHAvailable in 3 variantsFor aggressive liquids, complete with strong handle made of polypropylene.Chemistry scoop, PP, with rod handle | Capacity ml: 1000, Shaft diam. mm: 20, Stem mm: 1000
€74,45
ChemoSampler, accessory extension rod | Description: Extension rod, 1000 mm
Brand: Bürkle GmbHResistant to acids and alkaline solutions. Permits the extraction of samples up to a depth of 2000 mm e.g. from tanks, silos or tankers.ChemoSampler, accessory extension rod | Description: Extension rod, 1000 mm
€48,70
ChemoSampler, PP | Length mm: 1000
Brand: Bürkle GmbHGrey. For sampling aggressive liquids, e.g. acids, alkalis, detergents. The samples are drawn directly into the screw-on original sampling bottle. The tamperproof bottle closure of these bottles with original safety ring ensures unadulterated sample transport.Resistant to acids and alkalisIncl. sample bottle 1000 mlExtension rod 100 cm is available as accessoryChemoSampler, PP | Length mm: 1000
€98,15
Dip samplers, PP | Volume ml: 140, Immersion depth: 500 mm, Ø mm: 25
Brand: Bürkle GmbHAvailable in 3 variantsFor simple removal of liquid samples.Good view due to transparent tubesUpper end with reflux valve, lower end with ball valveAll-layer and point sampling possible500 ml dip sampler stepless extendableDip samplers, PP | Volume ml: 140, Immersion depth: 500 mm, Ø mm: 25
€52,65
Dipping vessels for sampling | Type: Dipping bottle
Brand: Bürkle GmbHAvailable in 7 variantsAccording to DIN 51750 pt. 2Dipping VesselFor sampling liquids from tanks, lorry tankers, etc. Made of brass or stainless steel AISI 304 (1.4301) for Ex areas. 1 L capacity, 82 mm diameter, 427 mm height with handle. Without lowering cable.Operation: When the dipping vessel is lowered, the liquid constantly runs through it. By pulling back, both valves close automatically.Emptying at the top via the open flaps.Dipping bottle EXFor sampling flammable liquids.For sampling category A mineral oil products, Explosion Categories IIA, IIB and IIC. Made from brass that do not produce sparks, 89 mm diameter, 443 mm height with handle, weight 3.3 kg. Without lowering cable.Operation: 1. Lower bottle into liquid. 2. Pull the cable when the target spot has been reached and the stopper opens. 3. Sample flows in. 4. Pull up dipping bottle and remove sample. Use an electrically conductive, manually operated reel and lowering cable or chain.Dipping bottle glassFor sewage disposal plants, sludge and water samples. Nickel-plated brass frame with glass sample bottle. 1000 ml capacity, 148 mm diameter, 330 mm high, weight 3.2 kg. Without lowering cable.Operation: 1. Lower bottle into liquid. 2. Pull cable when target depth is reached and open stopper. 3. Sample flows in. 4. Pull bottle back up and remove sample.Immersion CylindersFor target spot and bottom samples of mineral oil products. Made of nickel-plated brass. Heavy, robust design (4.3 kg). Without lowering and pull cablesTarget spot sample: 1. Immersion cylinder is lowered in the tank to be sampled by the manually operated reel. 2. The separate pull cable is used to open the valve when the target spot is reached and the sample then enters the immersion cylinder.Bottom sample: 1. Lower the immersion cylinder to the bottom. 2. The weight of the immersion cylinder opens the valve automatically when the bottom is reached and the sample then enters the immersion cylinder.Target immersion cylinderWith the Target immersion cylinder, liquid samples can be taken from a particular point. The immersion cylinder is lowered on a strong and sealed tube. When the target has been reached, a valve at the tube end is opened. This vents the immersion cylinder and fills it with the sample. The immersion cylinder is pulled up and emptied via the screw thread. Weight 2.6 kg. With 5 m venting tube. Screw off top enables easy cleaning.Mini immersion cylinderFor sampling liquids in narrow places where access is difficult. Can also be used in curved dipping tubes and barrels with narrow openings. Capacity 50 ml, 32 mm diameter, height 180 mm, weight 330 g. Without lowering cable. Upper body unscrews for easy cleaning.Dipping vessels for sampling | Type: Dipping bottle
€553,50
Disposable samplers | Volume ml: 175, Immersion depth mm: 600, Overall length mm: 750
Brand: Bürkle GmbHAvailable in 3 variantsTransparent. These disposable samplers were developed especially for sampling of strongly adhesive liquids to avoid a complicated cleaning process. PE provides a surface that resists adhesion of the sample material, minimising sample retention on the dip sampler.Disposable samplers | Volume ml: 175, Immersion depth mm: 600, Overall length mm: 750
€20,55
Extendable Pole
Brand: Neogen Europe Ltd.Designed for use with the Neogen® Sponge Stick for easier sampling of remote and hard-to-reach areas.Lightweight, extendable rod, robustEnables samples to be taken safely from ceilings and tanksExtendable Pole
€292,00
Fiber glass telescopic pole INGENIOUS | Length m: 1.50 - 6.00
Brand: Windaus-LabortechnikAvailable in 4 variantsVery robust telescopic pole, ideal for sample taking. Fiber glass makes it almost indestructible and non-corrosive. Comfortable to carry even at low temperatures. Simple extension and adjustment mechanism. You can change the length easily by a quarter rotation. (Pic. 3). At telescope poles of 3,85 to 6 meter the length could be easily changed by using the clamp (Pic. 2). Comfortable use of spring mechanism. This type can take all samplers and catchers with universal connecting part.Fiber glass telescopic pole INGENIOUS | Length m: 1.50 - 6.00
€126,00
Immersion Cylinders
Brand: Bürkle GmbHAvailable in 2 variantsFor target spot and bottom samples of mineral oil products. Made of nickel-plated brass.Screw-off topWith handleHeavy design for fast loweringWithout lowering and pull cablesTarget spot sample: 1. Immersion cylinder is lowered in the tank to be sampled by the manually operated reel. 2. The separate pull cable is used to open the valve when the target spot is reached and the sample then enters the immersion cylinder.Bottom sample: 1. Lower the immersion cylinder to the bottom. 2. The weight of the immersion cylinder opens the valve automatically when the bottom is reached and the sample then enters the immersion cylinder.Immersion Cylinders
€710,45
Liquid sampler MiniSampler, PE | Type: MiniSampler
Brand: Bürkle GmbHTaking samples is quick, easy, clean and practical.With the MiniSampler, the sample liquid only comes into contact with the suction hose and the sample bottle. Cross contamination is largely prevented. Bottles can be tightly sealed immediately after the sample is taken with a tamper-evident cap.The single use, PE suction hose can be quickly replaced, ensuring that samples are never contaminated. A new hose can be used for each sample if required. Because of its small diameter (8mm) and flexibility the hose can reach sampling areas that are otherwise inaccessible. Also suitable for viscous oils.Scope of supply: 10 x 100 ml PE bottles, 10 m of PE suction hose (6 x 8mm), 1 hose cutter , 1 hose weight (V2A/nickel-plated brass), 20 seal-it safety seal labels, carrying caseLiquid sampler MiniSampler, PE | Type: MiniSampler
€222,80
Liquid sampler UniSampler with flexible sample tubing | Type: Liquid sampler, UniSampler
Brand: Bürkle GmbHUniSampler with PVC hose and hose weight made of stainless steel. For deep, hard-to-reach places. The mass of the metal tube drags the hose to any depth.PVC sample tubing, 2.5 m longIncl. 1000ml sample bottle, manual vacuum pump and adapter for sample bottle, V2A hose weight, 20 seal-it safety seal labels, supplied complete in carrying caseUniversal bottle adapter made of PVC, for bottle necks Ø 24 mm, 31 mm, 39 mm and 50 mm nominal dimensionLiquid sampler UniSampler with flexible sample tubing | Type: Liquid sampler, UniSampler
€225,00
Copyright © 2026 - Achrom nv - BE 0445.025.508 | General terms | Cookiebeleid | Privacybeleid | Handcrafted by CrayonCru®