Archrom

Home
Labstore
Vacuum technology, Drying, Dry storage
Diaphragm pumps
Pumps

Connector

CEE

Without plug

Depth mm

156

195

230

259

289

Description

Parts Kit

Vacuum regulator valve for ME 1

Vacuum regulator valve for ME 1C and MZ 1C

Description

Conversion kit N 820 G in SC 820 G

Conversion kit N 820 G in SH 820 G

Conversion kit N 820 G in SR 820 G

Conversion kit N 840 G in SC 840 G

Conversion kit N 840 G in SH 840 G

Conversion kit N 840 G in SR 840 G

Pressure side

Suction side

Dimensions (W x D x H) mm

211 x 243 x 198

225 x 195 x 147

235 x 325 x 245

239 x 243 x 198

239 x 328 x 198

242 x 246 x 198

243 x 243 x 198

243 x 243 x 245

243 x 254 x 198

243 x 319 x 374

243 x 325 x 198

243 x 325 x 245

243 x 328 x 198

247 x 121 x 145

260 x 533 x 359

260 x 533 x 450

260 x 552 x 450

260 x 554 x 359

265 x 230 x 170

268 x 254 x 290

303 x 143 x 163

312 x 121 x 170

316 x 143 x 223

337 x 287 x 251

357 x 308 x 470

380 x 230 x 170

440 x 265 x 305

560 x 430 x 410

600 x 365 x 420

Dual Use

Flow rate l / min.

Flow rate (50/60Hz) L / min.

11.66 / 14.16

12.5 / 15

20 / 23.33

21.66 / 25

33.33 / 36.67

36.67 / 40

38.33 / 41.67

63.30 / 71.67

63.33 / 70

66.67 / 73.33

121.67 / 135

173.30 / 193.30

201 / 221

201.66 / 201.05

223.33 / 223.70

273.30 / 306.67

For

N 86 KT.18

N 86 KT.18 / N 86 KN.18

N 86 KT.18 / N 816.3 KT.18

N 96 / N 816.3 KT.18 / N 816.1.2 KT.18 / N 938.50 KT.18 / N 820 G / N 840 G

N 816.3 KT.18 / N 816.1.2 KT.18

N 920 G

N 938.50 KT.18

N 938.50 KT.18 / N 920 G

For

MD 1

MD 1C / PC VARIO

ME 1 / ME 1C

ME 2

ME 2 / MZ 2

ME 2 NT

ME 2C / 4C (2x) / 8C (4x) / 16C (8x)

ME 2C / MZ 2C / MZ 4C

ME 2C NT

ME 4 / 4R / MZ 2 / 2D

ME 8 / MZ 4 / MD 4

MV 2

MV 10 / MD 12 (NT)

MZ 2 EX / MD 4C EX (2x) / MV 10C EX (4x)

MZ 2 VARIO / MD 4 VARIO / MV 2

MZ 2 VARIO / MZ 2D

MZ 2C

MZ 4C / MD 4C

MZ 8 / MD 8 / ME 16

MZ 8C / MD 8C / 12C / MV 10C

N 86 KN.18

N 86 KT.18

N 96

N 810.3 FT.18

N 816.3 KT / N 816.1.2 KT.18

N 820 G

N 820.3 FT.18 / SC 820 / N 820.3 FT.40.18

N 840 G

N 840.3 FT.18 / N 842.3 FT.18 / SC 840 / SBC 840.40 / N 840.3 FT.40.18

N 860.3 FT.40.18 / SBC 860.40

N 920

N 920 G

N 938.50 KT.18

For Type

MD 4C NT

ME 4 NT / MZ 2 NT

ME 4C NT

ME 8 NT

ME 8C NT

MV 2 NT / MD 4 NT

MZ 2C NT

MZ 2D NT

N 022 AN.18

N 022 AT.18

N 026.3 AN.18 / N 026.1.2 AN.18

N 026.3 AT.18 / N 026.1.2 AT.18

N 035 AN.18

N 035 AT.18

N 035.3 AN.18 / N 035.1.2 AN.18

N 035.3 AT.18 / N 035.1.2 AT.18

N 145 AN.18

N 145 AT.18

N 145.1.2 AN.18

N 145.1.2 AT.18

N 726.3 FT.18 / N 726.1.2 FT.18

N 810 FT.18

N 811 KN.18

N 811 KT.18

N 816.3 KN.18 / N 816.1.2 KN.18

N 820 AN.18

N 820 FT.18 / N 820 AT.18

N 820.3 AN.18

Height mm

119

147

170

207

220

223

226

239

240

278

Length mm

312

324

331

341

Manufacturer Article Number

20696600

20696602

20721100

20721101

20721102

20721103

20724100

20724102

20724103

20724106

Max. pressure bar

0.5

Max. pressure bar

0.21

0.48

0.84

Motor rating input W

180

370

Number of steps

Plug type

EU, UK, CH

Protection class

IP 54

Stroke cm³

Supply requirements V

230

Type

G1/8 ID4 PA

G1/8 ID4 PVDF

G1/8 ID6 PA

G1/8 ID6 PVDF

G1/8 ID8 PA

G1/8 ID10 PVDF

MPC 090 E

Type

6131

6132

Fork root

KF connection

MD 1

MD 1C

MD 4 NT

MD 4 VARIO select

MD 4C EX

MD 4C EX+AK+EK

MD 4C NT

MD 4CRL NT

MD 4C VARIO select

MD 12 NT

MD 12 NT VARIO select

MD 12C NT

MD 12C NT VARIO select

ME 1

ME 1C

ME 2 NT

ME 2C NT

ME 4 NT

ME 4C NT

ME 4R NT

ME 8 NT

ME 8C NT

ME 8C NT + 2AK

ME 16 NT

ME 16C NT

ME 16C NT VARIO select

MP 300

MP 500

MPC 101 Z

MPC 301 Z

MPC 601 T

MV 2 NT

MV 2 VARIO select

MV 10 NT

MV 10 NT VARIO select

MV 10C EX

MV 10C NT

MV 10C NT VARIO select

MZ 1C

MZ 2 NT

MZ 2C EX

MZ 2C EX+AK+EK

MZ 2C NT

MZ 2C VARIO select

MZ 2D NT

Microsart® e.jet

Microsart® maxi.vac

Microsart® mini.vac

N 96

N 816.1.2 KT.18

N 816.3 KT.18

N 820 G

N 820.3 FT.18

N 820.3 FT.40.18

N 840 G

N 840.3 FT.18

N 840.3 FT.40.18

N 842.3 FT.18

N 920 G

N 938.50 KT.18

Parts Kit for N 920 KT.18

Parts Kit for N 920 KT.18G

Regulator valve pressure

Regulator valve vacuum

Round bottom flask 500 ml with spherical joint, coated

Safety valve, DN 16(Stainless steel, PTFE)

Set of diaphragms and valves

Spare seal set, 1 diaphragm, 2 valves

Spare seal set, 2 diaphragms, 4 valves

Spare seal set, 4 diaphragms, 8 valves

Spare seal set, 8 diaphragms, 16 valves

Spare seal set, 8 diaphragms, 17 valves

Spare seal set, diaphragmand valves

U N 96

U N 816.1.2 KT.18

U N 816.3 KT.18

U N 820 G

U N 840 G

U N 920 G

U N 938.50 KT.18

Type of auxiliary energy

100 ... 230 V, 50/60 Hz

100 ... 240 V, 50/60 Hz

115 V, 60 Hz

Ultimate vacuum mbar

0.3

0.5

1.5

100

Ultimate vacuum mbar (abs).

130

160

Ultimate vacuum without / with gas ballast mbar

2 / 4

12 / 20

100

Ultimate vacuum without / with gas ballast mbar (abs.)

0.6 / 1.2

0.9 / 1.5

1.5

1.5 / 3

2 / 4

2 / 10

3 / 10

7 / 12

12 / 18

70 / 100

Weight kg

1.3

5.0

6.5

6.7

6.9

8.8

11.2

11.3

18.3

Width mm

154

158

163

166

167

177

189

225

265

291

380

max. discharge flow m³ / hr.

1.9

2.0 / 2.3

2.1 / 2.4

2.8

3.4 / 3.8

3.7

3.9 / 4.3

4.6

7.1 / 7.8

8.1

9.5 / 10.7

12.0 / 13.3

12.8

14.3

16.3 / 18.4

19.3

1 2 3

Diaphragm Vacuum Pump N 860.3 FT.40.18 | Flow rate l / min.: 60, Ultimate vacuum mbar (abs).: 4, Width mm: 291

Brand: KNF NEUBERGER GmbHApplication: Rotary evaporation, distillation, vacuum oven, centrifugal concentrationFlow rate 3.6 m³/h / ultimate vacuum 4 mbar abs.Integrated KNF self-drying system ensures that condensate is quickly removed from the pump heads without the vacuum being altered. This significantly reduces process time and preserves the pump headsChemically resistant and thus ideal for use with extremely aggressive/corrosive gases and vapors

€4.320,00

Diaphragm Vacuum Pump N 920 G | Type: U N 920 G, Flow rate l / min.: 21, Ultimate vacuum mbar (abs).: 2

Brand: KNF NEUBERGER GmbHAvailable in 2 variantsApplication: Degassing, Gel drying, Rotary evaporation, DistillationFlow rate 1.26 m³/h / Ultimate vacuum 2 mbar abs.High suction speed, particularly in the low vacuum rangeIntegrated rotational speed control enables pumping capacity to be easily adapted manually to process requirementsPPS pump head combined with PTFE-coated diaphragm are ideal for aggressive/corrosive gases and vaporsIntegrated gas ballast valveTip: When combined with the VC 900 vacuum control unit and the connection cable, the rotational speed is controlled in accordance with the requirements of the process.

€4.705,00

Diaphragm vacuum pumps -NT Series, Chemistry design | Type: MD 4C VARIO select, Dimensions (W x D x H) mm: 243 x 325 x 245, max. discharge flow m³ / hr.: 4.6

Brand: Vacuubrand GmbH & Co.KGAvailable in 30 variantsImproved performance, increased pumping speed and lower ultimate vacuum extends applications in both the laboratory and in industrial applicationsLong-life diaphragm with PTFE sandwich construction and unstressed diaphragm supportEasy service/exchange of diaphragm or valves due to novel integrated valve head assembly. Easy dismantling, cleaning and reassembly without requiring readjustmentVery quiet and ultra low vibration due to compact drive with patented motor control system. Ideal as a built-in component for sensitive equipment in both the laboratory and in industrySuperior vapour tolerance due to integral tubing connections and gas ballast valve for continuous purge (for ME 16C NT, MZ 2C NT, MD 4C / 12C NT and MV 10C NT)Easy to clean due to smooth exterior surfacesThe VARIO® design provides vacuum control by precise and continuous adaption of the chemistry diaphragm pumps motor speed, and includes the vacuum pump, as well as the VACUU·SELECT controller.Diaphragm pump MD 4CRL NT with reduced leakage rate (0.001 mbar x l/s).Country-specific power cord versions available on request.

€6.390,00

Diaphragm vacuum pumps LABOPORT® N 820 G / N 840 G, chemically-resistant | Type: U N 840 G, Flow rate l / min.: 34, Ultimate vacuum mbar (abs).: 6

Brand: KNF NEUBERGER GmbHAvailable in 4 variantsThe compact pumps feature a control knob for manual adjustments of the flow rate, making them well suited to a wide variety of applications, e.g. rotary evaporation, distillation, gel drying, degassing as well as the use with vacuum ovens and vacuum concentrators. Due to the manual rotational speed control, the pumps are quiet, very energy efficient, and can be optimally adjusted in accordance with the application.Easy-to-clean surfaceAdjustable in flow rate due to manual rotational speed controlCombination of PTFE pump head and PTFE-coated diaphragm makes the pump ideal for extremely aggressive/corrosive gases and vaporsHigh level of compatibility with vapor and condensationIntegrated gas ballast valve3-color status display: In operation / Stand-by / ErrorATEX-compliant in accordance with II 2/-G IIB+H2 T3 internal atmpsphere only100% oil-free transfer to ensure uncontaminated transfer, evacuation and compressionOptional: Easily expandable with separators and/or condensers

€3.813,00

Diaphragm vacuum pumps LABOPORT® SD, chemically-resistant | Type : N 820.3 FT.40.18, Flow rate l / min. : 20, Ultimate vacuum mbar (abs). : 10

Brand: KNF NEUBERGER GmbHAvailable in 2 variantsApplication: Rotary evaporation, Distillation, Vacuum oven, Centrifugal concentrationFlow rate up to 2.04 m³/h / Ultimate vacuum 10 mbar abs.Integrated KNF self-drying system ensures that condensate is quickly removed from the pump heads without the vacuum being altered. This significantly reduces process time and preserves the pump heads.Chemically resistant and thus ideal for use with extremely aggressive/corrosive gases and vapors

€2.261,00

Diaphragm vacuum pumps LABOPORT® | Type : N 842.3 FT.18, Width mm : 167, Length mm : 341

Brand: KNF NEUBERGER GmbHAvailable in 3 variantsApplication: Fluid aspiration, Degassing, Gel drying, Rotary evaporation, Centrifugal concentration, DistillationFlow rate up to 2.04 m³/h / Ultimate vacuum up to 8 mbar abs.High level of vapor and condensate compatibilityPTFE pump head combined with PTFE-coated diaphragm are ideal for extremely aggressive/corrosive gases and vaporsN 820.3 FT.18 and N 840.3 FT.18: ATEX-compliant in accordance with ATEX II 2/-G IIB+H2 T3 Gb internal atmosphere only

€3.396,00

Diaphragm vacuum pumps MPC 090 E, chemical-resistant | Type: MPC 090 E

Brand: Gardner Denver Thomas GmbHThe MPC 090 E diaphragm pump has been specially developed for vacuum filtration and solid phase extraction (SPE) and is used for single funnel filtrations and with multiple filtration devices and desiccators. A built-in vacuum fine adjustment valve and pressure gauge allow variable adjustment of the applied vacuum, while the built in catch pot prevents accidental ingestion of liquid into the pump.Chemically resistant to the common aggressive solvent and acid vapours in laboratoriesAll parts in contact with gas are made of PTFE or PTFE compoundsThe pump and connection heads are carbon fibre-reinforced and electrically conductiveClean vacuum generation due to 100 % oil-free operationUltra quiet operationMaintenance-freeSuitable for field use with optional adapterScope of supply: Diaphragm pump, hose shaft DN 6, exhaust air damper, power adapter, connection adapter EU and UK

€876,00

Fine control valves for Vacuum Pumps LABOPORT® / N 920 G

Brand: KNF NEUBERGER GmbHAvailable in 4 variants

€82,70

Hand-operated vacuum pumps Nalgene™ | Type : 6131, Stroke cm3 : 15, Max. pressure bar : 0.21

Brand: Thermo Elect.LED GmbH (Nalge)Available in 4 variantsType 6131:With PVC casing. Vacuum of approx. 86 mbar can be achieved and maintained. With outlet valve with detachable cover and separate vacuum release lever. Available with, or without, pressure gauge (divisions in cm and inches Hg). Tubing connection nozzle fits tubing with an internal diameter of 6.4 mm. Supplied with 60 cm length of clear plastic tubing.Type 6132:As type 6131, but additionally with vacuum gauge. Can be disassembled for repair or replacement of internal parts.

€138,50

Hose connector for Vacuum Pumps LABOPORT® / N 920 G | Type: G1/8 ID4 PA, For: N 86 KT.18

Brand: KNF NEUBERGER GmbHAvailable in 6 variants

€3,30

Hydrophobic pump protection filter for Diaphragm vacuum pumps and pump systems LABOPORT® / LABOBASE®

Brand: KNF NEUBERGER GmbH

€29,60

Laboratory Vacuum Pump Microsart® e.jet | Type: Microsart® e.jet

Brand: Sartorius Lab InstrumentsThe laboratory vacuum pump for the filtration of samples in microbiology. During the vacuum filtration, the filtrate is directly discharged to the drain.Transmembranous pressure of less than 700 mbar, acc. ISO 8199Constant flow ratesDefined maximum vacuumSuitable for gases and liquids

€1.650,00

1 2 3

Phlippostraat 7, 9870 Machelen, Belgium
Phone +32 9 380 06 47 - Email achrom@achrom.be

Please wait

An error occurred