Accessories for determining the COD | Type: LK 1, Description: COD air cooler
Merk: Behr Labor-Technik GmbHBeschikbaar in 12 variantenAccessories for determining the COD | Type: LK 1, Description: COD air cooler
€35,00
behr COD Heating Blocks | Type : CSB 24 / E, Description : for 24 RG reaction vessels, Rating W : 2000
Merk: Behr Labor-Technik GmbHBeschikbaar in 3 variantenCOD acc. to ISO Precision heating blocks with 6, 12 or 24 sample positions. Flat surface heater for even temperature distribution to each sample position. Stainless steel and powder coated steel casing. Extensive insulation provides for inoffensive temperatures of the casing surfaces.End-to-end grooves in the precision aluminum plate at the bottom of the bores simplify sample handling and provide for exemplary safety of the analyst:During sample insertion the grooves cause pressure compensation. Thus even the most accurately fitting reaction vessels slip easily into the bores, which is required to effortlessly handle the behr insert and yoke type frames for RG 2 reaction vessels.When inserting the samples into the hot heating block adherent moisture on the vessel surface evaporates in sudden bursts. The grooves drain off the vapor which otherwise might cause the vessels to jump up and down which might eventually lead to the destruction of the vessels.In case of one or more vessels overflowing the liquid COD samples discharge through the grooves minimizing the danger of damages inside the block caused by acids.behr COD Heating Blocks | Type : CSB 24 / E, Description : for 24 RG reaction vessels, Rating W : 2000
€2.876,80
behrotest ® HTI 1 manual titration station | Type : HTI, Description : Manual titration station
Merk: Behr Labor-Technik GmbHThe HTI 1 manual titration station consists ofa burette with digital display anda magnetic stirrer with a precisely fitting holder for COD reaction vessels. A screen serves as a neutral background and allows the user to determine the colour change at the end of the titration precisely. Therefore a titration could always carried out under similar visual conditions. This improves the precision and the reproducibility of the results.The precise positioning of the reaction vessels in the holder on the top of the magnetic stirrer also contributes to this. The angled wing of the screen protects against lateral dazzling light.behrotest ® HTI 1 manual titration station | Type : HTI, Description : Manual titration station
€1.804,00
Chemical Oxygen Demand (COD) Standards | Type : COD10, Measuring range mg / l : 10
Merk: Reagecon Diagnostics Ltd.Beschikbaar in 15 variantenThese standards are ideal for use as control standards to verify that correct analysis for COD has taken place. Extensive range (10 to 60000 ppm), NIST traceable, 2 years shelf-life. HDPE bottle of 500 ml.Chemical Oxygen Demand (COD) Standards | Type : COD10, Measuring range mg / l : 10
€163,09
COD cooling trough | Type : KW 24/N, Description : Cooling trough for E 12/BV insert frame
Merk: Behr Labor-Technik GmbHBeschikbaar in 5 variantenThe cooling trough prevents the overheating of the COD samples during the critical addition of sulphuric acid. In addition, it is used to cool the samples after the heating phase.COD cooling trough | Type : KW 24/N, Description : Cooling trough for E 12/BV insert frame
€641,60
COD magnetic stirrer | Type : IMR, Description : COD magnetic stirrer for 1 reaction vessel
Merk: Behr Labor-Technik GmbHThe continuously adjustable COD series magnetic stirrer with 12 stirring points is used to mix the samples during the metering process. Due to its watertight casing and also its external power supply and control, it is suitable for use under water.COD magnetic stirrer | Type : IMR, Description : COD magnetic stirrer for 1 reaction vessel
€470,30
COD magnetic stirrer | Type : SM/12N, Description : Series magnetic stirrer for E 12/B insert
Merk: Behr Labor-Technik GmbHThe continuously adjustable COD series magnetic stirrer with 12 stirring points is used to mix the samples during the metering process. Due to its watertight casing and also its external power supply and control, it is suitable for use under water.COD magnetic stirrer | Type : SM/12N, Description : Series magnetic stirrer for E 12/B insert
€1.713,50
COD measuring station MD 200 | Type: MD 200
Merk: Tintometer GmbHAccording to ISO 15705. This measuring station from Lovibond® allows the accurate, rapid, and economical determination of meaningful waste water COD levels (Chemical Oxygen Demand). Easy operation, even by unskilled operators. Comprises of COD photometer, 25 tube tests covering lower measuring ranges, a reactor block for sample digestion and a tube stand. Waterproof acc. to IP 68, 1 hour at 0.1 meter.Scope of supply: Instrument in carrying case, 4 batteries (AA), adapter for round vials diam. 16 mm, 2 sets of tube tests 0-150 mg/l and 0-1500 mg/l, thermoreactor RD 125, tube stand, 2 syringes, instruction manual.COD measuring station MD 200 | Type: MD 200
€1.685,40
COD metering funnel | Type : DT 30, Description : metering funnel, 30 ml, for sulphuric acid
Merk: Behr Labor-Technik GmbHCOD metering funnels, placed on top of the COD reaction vessels, simplify the addition of sulphuric acid to several samples simultaneously.COD metering funnel together with a cooling trough and a series magnetic stirrer increase the safety and offer considerable relief to the user when determining the COD.COD metering funnel | Type : DT 30, Description : metering funnel, 30 ml, for sulphuric acid
€69,60
COD sample digestion units PA-CSB | Type : PA-CSB 12
Merk: Behr Labor-Technik GmbHBeschikbaar in 2 variantenUnit configuration for simultaneous digestion of maximum 6 or 12 COD samples in acc. with ISO, DIN etc.A digestion unit consists of the following components:TRS 300 microprocessor-controlled time and temperature control unit with COD programCSB/E Precision heating block for RG 2 reaction vesselsE/B Insert and yoke type frame for RG 2 reaction vesselsKW/N Cooling trough with holder and stands for E/BRG 2 Reaction vesselsLK 1 COD air coolersLS Air cooler stands for LK COD air coolersCOD sample digestion units PA-CSB | Type : PA-CSB 12
€5.331,00
COD workstations, PB-CSB/M | Type : PB-CSB 12/M
Merk: Behr Labor-Technik GmbHBeschikbaar in 2 variantenFor COD determination. Complete workstations for simultaneous determination of maximum 6 or 12 samples in acc. with ISO, DIN etc. Manual metering and titration.A workstation consists of the following componentsTRS 300 Microprocessor-controlled time and temperature control unit with COD programCSB/E Precision heating block for RG 2 reaction vesselsE/B Insert and yoke type frame for RG 2 reaction vesselsKW/N Cooling trough with holder and stands for E/BSM 12/N Series magnetic stirrer for E 12/B insert/yoke type frame (only for PB-CSB 12/M)RG 2 Reaction vesselsMRST 2 Magnetic stirrer rod set , 12 rodsSIST 100 Boiling stones , contents 100 gLK1 COD Air coolersLS Air cooler stand for LK COD air coolersPTFE 29 PTFE Collars for LK 1, set of 12 collarsTS COD Transport stands for E/B insert/yoke type frameHTI 1 Manual titration stationCOD workstations, PB-CSB/M | Type : PB-CSB 12/M
€7.437,00
COD-Standard Cuvette Test, 16 mm | Type : CSB HR, Measuring range : 0 ... 15000 mg/l O2
Merk: Tintometer GmbHBeschikbaar in 8 variantenDue to the chemical properties suitable for various photometers (e.g. Lovibond®, Hach®) with 16 mm tube diameter.COD-Standard Cuvette Test, 16 mm | Type : CSB HR, Measuring range : 0 ... 15000 mg/l O2
€77,50
Copyright © 2026 - Achrom nv - BE 0445.025.508 | Algemene voorwaarden | Cookiebeleid | Privacybeleid | Handcrafted by CrayonCru®