Dissolver stirrers, stainless steel 1.4571 | Type: R 1302, Stirring head Ø: 100 mm, Stirring rotor Ø: 10 mm
Merk: IKA-Werke GmbH & Co.KGBeschikbaar in 3 variantenThe dissolver stirrers create a radial flow with high turbulence. The mixture is drawn from top to bottom. High shear forces are created at the dissolver disk, which provides effective particle reduction. Recommended for medium to high speed operations.Dissolver stirrers, stainless steel 1.4571 | Type: R 1302, Stirring head Ø: 100 mm, Stirring rotor Ø: 10 mm
€647,00
Dissolver stirring rotors, stainless steel 1.4404 | Ø agitator mm: 60, Ø agitator shaft mm: 10, Length mm: 550
Merk: Buddeberg GmbHBeschikbaar in 6 variantenThe dissolver stirring rotor creates a radial flow with high turbulence. The mixture is drawn from top to bottom. High shear forces are created at the dissolver disk, which provides effective particle reduction. Recommended for medium to high speed operations.Dissolver stirring rotors, stainless steel 1.4404 | Ø agitator mm: 60, Ø agitator shaft mm: 10, Length mm: 550
€184,70
Finger-operated oiler OT | Type: ÖT, Description: Finger-operated oiler
Merk: Buddeberg GmbHFor manual lubrication of compressed air coming into the motor.Finger-operated oiler OT | Type: ÖT, Description: Finger-operated oiler
€257,50
Impellers for Overhead Stirrers | Type: Blade stirrer BR 13, Material: V 2A, Dimensions mm: 70 x 70
Merk: Heidolph InstrumentsBeschikbaar in 14 variantenPowerful StirringShaft diameter: 8mmBlade and Half-Moon ImpellerThese impellers are recommended for applications which require an average speedFor mixing products with average viscosityModels BR 12, BR 14 and HR 18 come with collapsible blade for narrow neck vesselsPropeller-Type ImpellerThese impellers are recommended for applications which require an average or high speedFor mixing products with medium or high viscosityExcellent mixing properties for homogenisation and suspensionsThese models create an axial flowRadial Flow ImpellerThese impellers are recommended for applications which require an average speedFor mixing products with average viscosity up to Impellers for Overhead Stirrers | Type: Blade stirrer BR 13, Material: V 2A, Dimensions mm: 70 x 70
€77,00
Impellers VISCO JET® | Material: V4A, For Vessels mm: 170-300, Ø agitator shaft mm: 10
Merk: Heidolph InstrumentsBeschikbaar in 7 variantenThe worldwide patented VISCO JET® Mixing System is the result of the so-called cone-principle. Turbulent flows are created at the taper end by acceleration, displacement and retardation. These flows advance through the stirred medium and result in the new dynamic mixing motion.One system for literally all mixing tasks for low to high viscosity mediaPatented cone-principle creates even at low speeds a turbulent flow which is unique to the VISCO JET®Even with high-viscosity media and gels which naturally do not mix by using common impellers you will observe an immediate flow through the entire beakerThis technology allows for de-gassing of gels while preventing air intake and foamingReduce process times significantly while performing the best mixing result everThe stirring systems are made of stainless steel (V4A or AISI 316 Ti) or polyoxymethylene (POM).Impellers VISCO JET® | Material: V4A, For Vessels mm: 170-300, Ø agitator shaft mm: 10
€526,00
Moebius stirrer, stainless steel 1.4571 | Type: R 3000.1, Ø agitator mm: 100, Ø agitator shaft mm: 10
Merk: IKA-Werke GmbH & Co.KGGenerates axial flow. For drawing the material to be mixed from above. For circulating and handling low to medium viscous liquids. Recommended for medium speed operations.Moebius stirrer, stainless steel 1.4571 | Type: R 3000.1, Ø agitator mm: 100, Ø agitator shaft mm: 10
€480,00
Overhead stirrer rotors, centrifugal paddle, PTFE | Shaft diam. mm: 8, To fit chuck diam. mm: 6.5, Ø Paddle mm: 90
Merk: Bohlender GmbHBeschikbaar in 6 variantenWith PTFE-coated, stainless steel shaft.Overhead stirrer rotors, centrifugal paddle, PTFE | Shaft diam. mm: 8, To fit chuck diam. mm: 6.5, Ø Paddle mm: 90
€144,32
Overhead stirrer rotors, paddle | Length mm: 600, Shaft diam. mm: 10, To fit chuck diam. mm: 8.0
Merk: Bohlender GmbHBeschikbaar in 4 variantenOverhead stirrer rotors, paddle | Length mm: 600, Shaft diam. mm: 10, To fit chuck diam. mm: 8.0
€236,60
Overhead Stirrer shafts | Type: Shaft, 350 mm long
Merk: Cole-Parmer Ltd. (Stuart)Beschikbaar in 2 variantenStainless steel. Supplied as separate 8mm diameter shaft with tapped screwthread end onto which can be attached a choice of paddle types. Lengths as indicated.Overhead Stirrer shafts | Type: Shaft, 350 mm long
€59,94
Paddle stirring rotors, stainless steel | Ø agitator mm: 150, Ø agitator shaft mm: 10, Length mm: 550
Merk: IKA-Werke GmbH & Co.KGBeschikbaar in 2 variantenThe paddle stirring rotor creates a tangential flow with minimum turbulence. Its design ensures a gentle action on sensitive products and good heat exchange. Recommended for low to medium speed operations.Other sizes available on request.Paddle stirring rotors, stainless steel | Ø agitator mm: 150, Ø agitator shaft mm: 10, Length mm: 550
€414,00
Paddles | Type: Large paddle stirrer
Merk: Cole-Parmer Ltd. (Stuart)Beschikbaar in 5 variantenFor use with 9.950 401 and 9.950 402 shafts.Paddles | Type: Large paddle stirrer
€54,86
Paddles, 4 blade propeller | Thread M: 6, Type: 90° offset, Blade mm: 70
Merk: Apollo Herkenrath GmbH & Co.KGStainless steel 1.4301. With screwthread shaft connection as outlined below.Paddles, 4 blade propeller | Thread M: 6, Type: 90° offset, Blade mm: 70
€28,96
Copyright © 2026 - Achrom nv - BE 0445.025.508 | Algemene voorwaarden | Cookiebeleid | Privacybeleid | Handcrafted by CrayonCru®