Even geduld

Uw bericht wordt verstuurd

Er is een fout opgetreden

Emptying device, stainless steel | Description: Emptying device
Emptying device, stainless steel | Description: Emptying device
Merk: Bürkle GmbHEmptying zone samplers were often a matter of patience and a steady hand. Now it's easier and faster with Bürkle's emptying device. Just lay the zone sampler onto the stainless steel stand, adjust the funnels along the sample chambers, and, after turning the sampler, the media will directly flow into the containers below. Quality materials ensure that the emptying device is autoclavable.
€453,20
Extendable Pole
Extendable Pole
Merk: Neogen Europe Ltd.Designed for use with the Neogen® Sponge Stick for easier sampling of remote and hard-to-reach areas.Lightweight, extendable rod, robustEnables samples to be taken safely from ceilings and tanks
€292,00
Fiber glass telescopic pole INGENIOUS | Length m: 1.50 - 6.00
Fiber glass telescopic pole INGENIOUS | Length m: 1.50 - 6.00
Merk: Windaus-LabortechnikBeschikbaar in 4 variantenVery robust telescopic pole, ideal for sample taking. Fiber glass makes it almost indestructible and non-corrosive. Comfortable to carry even at low temperatures. Simple extension and adjustment mechanism. You can change the length easily by a quarter rotation. (Pic. 3). At telescope poles of 3,85 to 6 meter the length could be easily changed by using the clamp (Pic. 2). Comfortable use of spring mechanism. This type can take all samplers and catchers with universal connecting part.
€126,00
Filter bag FILTRA-BAG
Filter bag FILTRA-BAG
Merk: Labplas IncThe filtra bag is a blender bag designed t facilitate aliquot sampling. The filter membrane allows bacteria to circulate between compartments while keeping larger amonts of residue separate. It´s ideal solution for samples that have to be free of solid particles for microbiological analysis.Full-size filter membrane for optimal filtrationPE terephthalate outer membrane for added strengthIntegrated secure closure system with 1 round wire and 1 flat wire
€112,70
Filter bag FILTRA-BAG
Filter bag FILTRA-BAG
Merk: Labplas IncThe filtra bag is a blender bag designed t facilitate aliquot sampling. The filter membrane allows bacteria to circulate between compartments while keeping larger amonts of residue separate. It´s ideal solution for samples that have to be free of solid particles for microbiological analysis.Full-size filter membrane for optimal filtrationPE terephthalate outer membrane for added strength
€71,53
Filter bags Whirl-Pak®, PE, sterile | Nominal capacity ml: 1627, Dimensions (D x W) mm: 190 x 300, Thickness mm: 0,102
Filter bags Whirl-Pak®, PE, sterile | Nominal capacity ml: 1627, Dimensions (D x W) mm: 190 x 300, Thickness mm: 0,102
Merk: Nasco Sampling LLCBeschikbaar in 3 variantenAll the bags use the same filter material. These special bags contain a third layer of finely perforated polyethylene, which filters out the solids in the sample when used in a homogeniser blender. This allows for easy pipetting of the sample. The hole diameter in the filter layer measures 0.33 mm and there are 285 holes per square cm. The filter is sealed into the perimeter of the bag on the sides and bottom, allowing the sample to be placed in the bag on either side. The liquid will transfer through the filter, but the solids stay on one side. With write-on lable. Temperature range: -210 to 82 °C.
€449,00
Filter bags Whirl-Pak®, PE, sterile | Nominal capacity: 1627 ml, Dimensions (WxH): 190 x 300 mm, Thickness: 0.102 mm
Filter bags Whirl-Pak®, PE, sterile | Nominal capacity: 1627 ml, Dimensions (WxH): 190 x 300 mm, Thickness: 0.102 mm
Merk: Nasco Sampling LLCAll the bags use the same filter material. These special bags contain a third layer of finely perforated polyethylene, which filters out the solids in the sample when used in a homogeniser blender. This allows for easy pipetting of the sample. The hole diameter in the filter layer measures 0.33 mm and there are 285 holes per square cm. The filter is sealed into the perimeter of the bag on the sides and bottom, allowing the sample to be placed in the bag on either side. The liquid will transfer through the filter, but the solids stay on one side. With write-on lable. Temperature range: -210 to 82 °C.
€345,00
Flow cell reactor FC7K for ultrasonic homogenisers UP200Ht / UP200St, stainless steel | Type: FC7K
Flow cell reactor FC7K for ultrasonic homogenisers UP200Ht / UP200St, stainless steel | Type: FC7K
Merk: Hielscher Ultrasonics GmbHStainless steel flow cell with cooling jacket, NBR O-ring, hose connection, plastic clamps and 2 m long hose. Suitable for sonotrodes S26d2D or S26d7D.
€995,00
Flow-through cell for SONOPULS Ultrasonic homogenisers, stainless steel | Type: DG 4 G (flow-through)
Flow-through cell for SONOPULS Ultrasonic homogenisers, stainless steel | Type: DG 4 G (flow-through)
Merk: Bandelin electronicStainless steel, sealed, vibration-free reaction vessel with cooling jacket. For direct ultrasonic irradiation. For connection to SH 70 G or SH 213 G with TT 13. For HD 2070.2 and HD 2200.2. homogenisers. Flow rate up to 30 L/hr.
€1.751,00
Flow-through standard horn for Sonopuls Ultrasonic homogenisers | Type: FZ 7 G, For: HD 2200.2
Flow-through standard horn for Sonopuls Ultrasonic homogenisers | Type: FZ 7 G, For: HD 2200.2
Merk: Bandelin electronicBeschikbaar in 2 variantenFor indirect ultrasonic irradiationFlow-through standard horn FZ 5 G with external screwthread and titanium flat tip TT 13 FZFlow-through standard horn FZ 7 G with external screwthread and titanium flat tip TT 13 FZ
€883,00
Gas sampling tubes, DURAN® tubing | Type: Without sampling connections, Capacity ml: 500, External body diam. mm: 65
Gas sampling tubes, DURAN® tubing | Type: Without sampling connections, Capacity ml: 500, External body diam. mm: 65
Merk: Lenz-Laborglas GmbH & Co. KGBeschikbaar in 8 variantenMade of DURAN® tubing. Available with or without nozzle (with thread GL and septa), with two one-way stopcocks NS14 (with retaining device), connections: capillary tube (outer dia. 8mm, inner dia. 2.7mm), glass olive (outer dia. 8mm), with inscription label. Also available with PUR coating.
€102,40
Gaskets for grinding jars EasyFit | Description: O-ring for grinding jars EasyFit 250 ... 500 ml, agate
Gaskets for grinding jars EasyFit | Description: O-ring for grinding jars EasyFit 250 ... 500 ml, agate
Merk: Retsch GmbHBeschikbaar in 3 varianten
€11,00

Onze website maakt gebruik van cookies.
Zowel wij en onze derde partij partners maken gebruik van cookies. Sommige zijn strikt noodzakelijk om de site te laten functioneren, maar er bestaan ook optionele cookies.

De noodzakelijke en functionele cookies staan altijd aan. Als je op "alle cookies aanvaarden" klikt accepteer je ook de optionele cookies. Je kan zelf kiezen welke cookies je aan wil zetten via "voorkeuren instellen".

Onze website maakt gebruik van cookies.
Wat zijn cookies? Welke cookies gebruiken we en waarom? Lees meer in ons cookiebeleid

Noodzakelijke cookies

Cookies die onontbeerlijk zijn voor uw bezoek aan de Website en het correct gebruik daarvan

Functionele cookies

Cookies die uw bezoek aan de Website vergemakkelijken en aangenamer maken, onder meer door uw surfervaring te personaliseren.

Performantie cookies

Cookies die informatie verzamelen over uw gebruik van de Website met de bedoeling de inhoud van de Website te verbeteren en aan te passen aan de wensen van de Gebruiker.

Derde partij cookies

Cookies die geplaatst worden door derden die eigen diensten aanbieden via de Website zoals bijvoorbeeld social media, advertenties of videodiensten.