Even geduld

Uw bericht wordt verstuurd

Er is een fout opgetreden

Algemene labobenodigdheden

Analytisch meten en testen

Behandeling van vloeistoffen

Bescherming en veiligheid

Chromatografie

Cleanroom

Destillatie, scheiding, filtratie

Levenswetenschappen

Milieu-, bodem-, water-, voedselanalyse

Monstervoorbereiding

Optische instrumenten en microscopen

Reiniging en sterilisatie

Roeren, schudden, mengen

Vacuümtechnologie, drogen, droge opslag

Verwarmings- en koeltechnologie

Behr Labor-Technik GmbH
123
Deionisers, pressure-resistant, behropur® | Type : B45dNA, Description : Pressure-resistant mixed bed unit, meter with water quality cut-out
Deionisers, pressure-resistant, behropur® | Type : B45dNA, Description : Pressure-resistant mixed bed unit, meter with water quality cut-out
Merk: Behr Labor-Technik GmbHBeschikbaar in 9 variantenCompact and secure mixed bed deionisers for small to medium-sized volumes of ultra pure water. Ideal for feeding laboratory washing machines, general requirements in the laboratory, low level consumption in industry and for post-treatment desalination of the output from reverse osmosis systems.Optimal utilisation of the deioniser due to totally uniform water distribution in the resin chamber.Can be connected directly to the raw water mains without a pressure reducer.Back pressure resistant.Also available with water quality cut-out and solenoid valve, which engages if specified limits are exceeded, and reservoir level control.Resistivity control available directly on the unit or remotely at any location.
€2.658,10
Deionisers, pressure-resistant, behropur® | Type : B45dNZ, Description : behropur water de-ioniser cartridge, nylon, pressure resistant for 9.882 122
Deionisers, pressure-resistant, behropur® | Type : B45dNZ, Description : behropur water de-ioniser cartridge, nylon, pressure resistant for 9.882 122
Merk: Behr Labor-Technik GmbHBeschikbaar in 9 variantenCompact and secure mixed bed deionisers for small to medium-sized volumes of ultra pure water. Ideal for feeding laboratory washing machines, general requirements in the laboratory, low level consumption in industry and for post-treatment desalination of the output from reverse osmosis systems.Optimal utilisation of the deioniser due to totally uniform water distribution in the resin chamber.Can be connected directly to the raw water mains without a pressure reducer.Back pressure resistant.Also available with water quality cut-out and solenoid valve, which engages if specified limits are exceeded, and reservoir level control.Resistivity control available directly on the unit or remotely at any location.
€2.055,00
Deionisers, pressure-resistant, behropur® | Type: B10dN, Description: Pressure-resistant mixed bed unit, with resistivity meter
Deionisers, pressure-resistant, behropur® | Type: B10dN, Description: Pressure-resistant mixed bed unit, with resistivity meter
Merk: Behr Labor-Technik GmbHBeschikbaar in 9 variantenCompact and secure mixed bed deionisers for small to medium-sized volumes of ultra pure water. Ideal for feeding laboratory washing machines, general requirements in the laboratory, low level consumption in industry and for post-treatment desalination of the output from reverse osmosis systems.Optimal utilisation of the deioniser due to totally uniform water distribution in the resin chamber.Can be connected directly to the raw water mains without a pressure reducer.Back pressure resistant.Also available with water quality cut-out and solenoid valve, which engages if specified limits are exceeded, and reservoir level control.Resistivity control available directly on the unit or remotely at any location.
€900,40
Deionisers, pressure-resistant, behropur® | Type: B10dNZ, Description: behropur water de-ioniser cartridge, nylon, pressure resistant for 9.882 120
Deionisers, pressure-resistant, behropur® | Type: B10dNZ, Description: behropur water de-ioniser cartridge, nylon, pressure resistant for 9.882 120
Merk: Behr Labor-Technik GmbHBeschikbaar in 9 variantenCompact and secure mixed bed deionisers for small to medium-sized volumes of ultra pure water. Ideal for feeding laboratory washing machines, general requirements in the laboratory, low level consumption in industry and for post-treatment desalination of the output from reverse osmosis systems.Optimal utilisation of the deioniser due to totally uniform water distribution in the resin chamber.Can be connected directly to the raw water mains without a pressure reducer.Back pressure resistant.Also available with water quality cut-out and solenoid valve, which engages if specified limits are exceeded, and reservoir level control.Resistivity control available directly on the unit or remotely at any location.
€665,30
Filter for behropur® mixed-bed ion exchanger | Type : AF 130
Filter for behropur® mixed-bed ion exchanger | Type : AF 130
Merk: Behr Labor-Technik GmbHBeschikbaar in 3 variantenFilter for pressure-resistant behropur® mixed-bed ion exchangers. Transparent casing. Once added to the ion exchanger, it completely retains even the finest particles and protects your high-quality equipment. Due to the transparent casing of the FG 130, you can see the state of the filter insert at any time and at a glance.Depending on the requirements, you can use a universal filter (5µ) or a carbon filter (20µ). Downstream filters may only be used on pressure-resistant behropur® ion exchangers. Pressure-free exchangers are destroyed by the counter pressure. It could also subsequently result in expensive damage.FG 130 behropur® filter housing for filter inserts with a length of 5". Transparent casing made of PP. Connections ¾", maximum operating pressure 8bar, max. temp. 50°CFE 130 behropur® filter insert, PP, 5µ, length 5", max. pressure 6bar, max. temp. 80°CAF 130 behropur® filter insert, carbon, 20µ, length 5", max. pressure 6bar, max. temp. 50°C
€37,90
Filter for behropur® mixed-bed ion exchanger | Type : FE 130
Filter for behropur® mixed-bed ion exchanger | Type : FE 130
Merk: Behr Labor-Technik GmbHBeschikbaar in 3 variantenFilter for pressure-resistant behropur® mixed-bed ion exchangers. Transparent casing. Once added to the ion exchanger, it completely retains even the finest particles and protects your high-quality equipment. Due to the transparent casing of the FG 130, you can see the state of the filter insert at any time and at a glance.Depending on the requirements, you can use a universal filter (5µ) or a carbon filter (20µ). Downstream filters may only be used on pressure-resistant behropur® ion exchangers. Pressure-free exchangers are destroyed by the counter pressure. It could also subsequently result in expensive damage.FG 130 behropur® filter housing for filter inserts with a length of 5". Transparent casing made of PP. Connections ¾", maximum operating pressure 8bar, max. temp. 50°CFE 130 behropur® filter insert, PP, 5µ, length 5", max. pressure 6bar, max. temp. 80°CAF 130 behropur® filter insert, carbon, 20µ, length 5", max. pressure 6bar, max. temp. 50°C
€24,90
Filter for behropur® mixed-bed ion exchanger | Type : FG 130
Filter for behropur® mixed-bed ion exchanger | Type : FG 130
Merk: Behr Labor-Technik GmbHBeschikbaar in 3 variantenFilter for pressure-resistant behropur® mixed-bed ion exchangers. Transparent casing. Once added to the ion exchanger, it completely retains even the finest particles and protects your high-quality equipment. Due to the transparent casing of the FG 130, you can see the state of the filter insert at any time and at a glance.Depending on the requirements, you can use a universal filter (5µ) or a carbon filter (20µ). Downstream filters may only be used on pressure-resistant behropur® ion exchangers. Pressure-free exchangers are destroyed by the counter pressure. It could also subsequently result in expensive damage.FG 130 behropur® filter housing for filter inserts with a length of 5". Transparent casing made of PP. Connections ¾", maximum operating pressure 8bar, max. temp. 50°CFE 130 behropur® filter insert, PP, 5µ, length 5", max. pressure 6bar, max. temp. 80°CAF 130 behropur® filter insert, carbon, 20µ, length 5", max. pressure 6bar, max. temp. 50°C
€128,70
Mixed-bed ion exchanger made of stainless steel | Type : E28dA, Material : Stainless steel V 4A, Description : conductivity meter with limit switch and electrovalve
Mixed-bed ion exchanger made of stainless steel | Type : E28dA, Material : Stainless steel V 4A, Description : conductivity meter with limit switch and electrovalve
Merk: Behr Labor-Technik GmbHBeschikbaar in 6 variantenStandard cartridge made of V4A stainless steel for general purpose application: To supply laboratory glassware washers, for general laboratory maintenance and for small industrial consumers. For subsequent demineralization of reverse osmosis systems.pressure resistant to 10 bar / 8 bar at E40dAoptimum exploitation of the ion exchanger capacity due to absolute uniform water distribution in the unitflow rates up to 700 litres/hourthe unique behropur® jet nozzle system distributes the raw water over the entire resin bed. This ensures an optimum exchange capacity and qualitycan be connected to the raw water network directly and without a pressure reducerresistant to alternating pressurehard rubber collars vulcanized to the base and top of the unit offer effective protectionconvenient transport thanks to the handles embedded into the top part of the unitconductivity is controlled directly on the unit (installed measuring equipment) or with remote location meterAlso available with shut-off when the limit value is reached and limit control
€1.648,60
Mixed-bed ion exchanger made of stainless steel | Type : E40d, Material : Stainless steel V 4A, Description : complete with conductivity meter
Mixed-bed ion exchanger made of stainless steel | Type : E40d, Material : Stainless steel V 4A, Description : complete with conductivity meter
Merk: Behr Labor-Technik GmbHBeschikbaar in 6 variantenStandard cartridge made of V4A stainless steel for general purpose application: To supply laboratory glassware washers, for general laboratory maintenance and for small industrial consumers. For subsequent demineralization of reverse osmosis systems.pressure resistant to 10 bar / 8 bar at E40dAoptimum exploitation of the ion exchanger capacity due to absolute uniform water distribution in the unitflow rates up to 700 litres/hourthe unique behropur® jet nozzle system distributes the raw water over the entire resin bed. This ensures an optimum exchange capacity and qualitycan be connected to the raw water network directly and without a pressure reducerresistant to alternating pressurehard rubber collars vulcanized to the base and top of the unit offer effective protectionconvenient transport thanks to the handles embedded into the top part of the unitconductivity is controlled directly on the unit (installed measuring equipment) or with remote location meterAlso available with shut-off when the limit value is reached and limit control
€1.915,40
Mixed-bed ion exchanger made of stainless steel | Type : E40dA, Material : Nylon, Description : conductivity meter with limit switch and electrovalve
Mixed-bed ion exchanger made of stainless steel | Type : E40dA, Material : Nylon, Description : conductivity meter with limit switch and electrovalve
Merk: Behr Labor-Technik GmbHBeschikbaar in 6 variantenStandard cartridge made of V4A stainless steel for general purpose application: To supply laboratory glassware washers, for general laboratory maintenance and for small industrial consumers. For subsequent demineralization of reverse osmosis systems.pressure resistant to 10 bar / 8 bar at E40dAoptimum exploitation of the ion exchanger capacity due to absolute uniform water distribution in the unitflow rates up to 700 litres/hourthe unique behropur® jet nozzle system distributes the raw water over the entire resin bed. This ensures an optimum exchange capacity and qualitycan be connected to the raw water network directly and without a pressure reducerresistant to alternating pressurehard rubber collars vulcanized to the base and top of the unit offer effective protectionconvenient transport thanks to the handles embedded into the top part of the unitconductivity is controlled directly on the unit (installed measuring equipment) or with remote location meterAlso available with shut-off when the limit value is reached and limit control
€2.293,90
Mixed-bed ion exchanger made of stainless steel | Type : E40dZ, Material : Stainless steel V 4A, Description : spare cartridge
Mixed-bed ion exchanger made of stainless steel | Type : E40dZ, Material : Stainless steel V 4A, Description : spare cartridge
Merk: Behr Labor-Technik GmbHBeschikbaar in 6 variantenStandard cartridge made of V4A stainless steel for general purpose application: To supply laboratory glassware washers, for general laboratory maintenance and for small industrial consumers. For subsequent demineralization of reverse osmosis systems.pressure resistant to 10 bar / 8 bar at E40dAoptimum exploitation of the ion exchanger capacity due to absolute uniform water distribution in the unitflow rates up to 700 litres/hourthe unique behropur® jet nozzle system distributes the raw water over the entire resin bed. This ensures an optimum exchange capacity and qualitycan be connected to the raw water network directly and without a pressure reducerresistant to alternating pressurehard rubber collars vulcanized to the base and top of the unit offer effective protectionconvenient transport thanks to the handles embedded into the top part of the unitconductivity is controlled directly on the unit (installed measuring equipment) or with remote location meterAlso available with shut-off when the limit value is reached and limit control
€1.655,40
Mixed-bed ion exchanger made of stainless steel | Type: E28d, Material: Stainless steel V 4A, Description: complete with conductivity meter
Mixed-bed ion exchanger made of stainless steel | Type: E28d, Material: Stainless steel V 4A, Description: complete with conductivity meter
Merk: Behr Labor-Technik GmbHBeschikbaar in 6 variantenStandard cartridge made of V4A stainless steel for general purpose application: To supply laboratory glassware washers, for general laboratory maintenance and for small industrial consumers. For subsequent demineralization of reverse osmosis systems.pressure resistant to 10 bar / 8 bar at E40dAoptimum exploitation of the ion exchanger capacity due to absolute uniform water distribution in the unitflow rates up to 700 litres/hourthe unique behropur® jet nozzle system distributes the raw water over the entire resin bed. This ensures an optimum exchange capacity and qualitycan be connected to the raw water network directly and without a pressure reducerresistant to alternating pressurehard rubber collars vulcanized to the base and top of the unit offer effective protectionconvenient transport thanks to the handles embedded into the top part of the unitconductivity is controlled directly on the unit (installed measuring equipment) or with remote location meterAlso available with shut-off when the limit value is reached and limit control
€1.146,90
123

Copyright © 2024 - Achrom nv - BE 0445.025.508    |    Algemene voorwaarden    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Onze website maakt gebruik van cookies.
Zowel wij en onze derde partij partners maken gebruik van cookies. Sommige zijn strikt noodzakelijk om de site te laten functioneren, maar er bestaan ook optionele cookies.

De noodzakelijke en functionele cookies staan altijd aan. Als je op "alle cookies aanvaarden" klikt accepteer je ook de optionele cookies. Je kan zelf kiezen welke cookies je aan wil zetten via "voorkeuren instellen".

Onze website maakt gebruik van cookies.
Wat zijn cookies? Welke cookies gebruiken we en waarom? Lees meer in ons cookiebeleid

Noodzakelijke cookies

Cookies die onontbeerlijk zijn voor uw bezoek aan de Website en het correct gebruik daarvan

Functionele cookies

Cookies die uw bezoek aan de Website vergemakkelijken en aangenamer maken, onder meer door uw surfervaring te personaliseren.

Performantie cookies

Cookies die informatie verzamelen over uw gebruik van de Website met de bedoeling de inhoud van de Website te verbeteren en aan te passen aan de wensen van de Gebruiker.

Derde partij cookies

Cookies die geplaatst worden door derden die eigen diensten aanbieden via de Website zoals bijvoorbeeld social media, advertenties of videodiensten.