Even geduld

Uw bericht wordt verstuurd

Er is een fout opgetreden

Algemene labobenodigdheden

Analytisch meten en testen

Behandeling van vloeistoffen

Bescherming en veiligheid

Chromatografie

Cleanroom

Destillatie, scheiding, filtratie

Levenswetenschappen

Milieu-, bodem-, water-, voedselanalyse

Monstervoorbereiding

Optische instrumenten en microscopen

Reiniging en sterilisatie

Roeren, schudden, mengen

Vacuümtechnologie, drogen, droge opslag

Verwarmings- en koeltechnologie

Bohlender GmbH
123456
Gas washing columns, FEP/PTFE | Type: Column, For external tube/pipe mm: 8, Capacity ml: 1000
Gas washing columns, FEP/PTFE | Type: Column, For external tube/pipe mm: 8, Capacity ml: 1000
Merk: Bohlender GmbHBeschikbaar in 5 variantenPTFE top with two threaded connections. The standard PTFE frit has a pore size of approx. 3 µm and is screwed on the riser tube with an M8x1 thread. It can be exchanged with the PTFE gas distributor with fine bores which needs a lower primary pressure.Temperature resistance: from -200°C to 250°CTransparentUnbreakableFrit easily exchangeable
€703,63
Gas washing columns, FEP/PTFE | Type: Column, For external tube/pipe mm: 8, Capacity ml: 500
Gas washing columns, FEP/PTFE | Type: Column, For external tube/pipe mm: 8, Capacity ml: 500
Merk: Bohlender GmbHBeschikbaar in 5 variantenPTFE top with two threaded connections. The standard PTFE frit has a pore size of approx. 3 µm and is screwed on the riser tube with an M8x1 thread. It can be exchanged with the PTFE gas distributor with fine bores which needs a lower primary pressure.Temperature resistance: from -200°C to 250°CTransparentUnbreakableFrit easily exchangeable
€529,83
GL screwthread ferrules | Type: Angled 40 mm, Thread GL: 14, Outer diam. mm: 8.7
GL screwthread ferrules | Type: Angled 40 mm, Thread GL: 14, Outer diam. mm: 8.7
Merk: Bohlender GmbHBeschikbaar in 6 variantenFluoroplastics, for tubing connection. Straight and curved models available, screw connector caps made of PPS reinforced with glass fibre (max. 250°C), ferrules made of PFA, with flexible PFA sealing rim and FPM O-ring. When in use, the contents only comes into contact with PFA (or PTFE - GL25 and GL32).
€7,52
GL screwthread ferrules | Type: Angled 54 mm, Thread GL: 18, Outer diam. mm: 10.5
GL screwthread ferrules | Type: Angled 54 mm, Thread GL: 18, Outer diam. mm: 10.5
Merk: Bohlender GmbHBeschikbaar in 6 variantenFluoroplastics, for tubing connection. Straight and curved models available, screw connector caps made of PPS reinforced with glass fibre (max. 250°C), ferrules made of PFA, with flexible PFA sealing rim and FPM O-ring. When in use, the contents only comes into contact with PFA (or PTFE - GL25 and GL32).
€12,11
GL screwthread ferrules | Type: Straight 35 mm, Thread GL: 14, Outer diam. mm: 8.7
GL screwthread ferrules | Type: Straight 35 mm, Thread GL: 14, Outer diam. mm: 8.7
Merk: Bohlender GmbHBeschikbaar in 6 variantenFluoroplastics, for tubing connection. Straight and curved models available, screw connector caps made of PPS reinforced with glass fibre (max. 250°C), ferrules made of PFA, with flexible PFA sealing rim and FPM O-ring. When in use, the contents only comes into contact with PFA (or PTFE - GL25 and GL32).
€5,95
GL screwthread ferrules | Type: Straight 39 mm, Thread GL: 18, Outer diam. mm: 10.5
GL screwthread ferrules | Type: Straight 39 mm, Thread GL: 18, Outer diam. mm: 10.5
Merk: Bohlender GmbHBeschikbaar in 6 variantenFluoroplastics, for tubing connection. Straight and curved models available, screw connector caps made of PPS reinforced with glass fibre (max. 250°C), ferrules made of PFA, with flexible PFA sealing rim and FPM O-ring. When in use, the contents only comes into contact with PFA (or PTFE - GL25 and GL32).
€12,23
GL screwthread ferrules | Type: Straight 55 mm, Thread GL: 25, Outer diam. mm: 16.0
GL screwthread ferrules | Type: Straight 55 mm, Thread GL: 25, Outer diam. mm: 16.0
Merk: Bohlender GmbHBeschikbaar in 6 variantenFluoroplastics, for tubing connection. Straight and curved models available, screw connector caps made of PPS reinforced with glass fibre (max. 250°C), ferrules made of PFA, with flexible PFA sealing rim and FPM O-ring. When in use, the contents only comes into contact with PFA (or PTFE - GL25 and GL32).
€14,22
GL screwthread ferrules | Type: Straight 65 mm, Thread GL: 32, Outer diam. mm: 21.0
GL screwthread ferrules | Type: Straight 65 mm, Thread GL: 32, Outer diam. mm: 21.0
Merk: Bohlender GmbHBeschikbaar in 6 variantenFluoroplastics, for tubing connection. Straight and curved models available, screw connector caps made of PPS reinforced with glass fibre (max. 250°C), ferrules made of PFA, with flexible PFA sealing rim and FPM O-ring. When in use, the contents only comes into contact with PFA (or PTFE - GL25 and GL32).
€28,77
Glass Stirrer Bearings, PTFE | For diam. stirring rod mm: 10, Overall length mm: 110, Thread GL: 25
Glass Stirrer Bearings, PTFE | For diam. stirring rod mm: 10, Overall length mm: 110, Thread GL: 25
Merk: Bohlender GmbHBeschikbaar in 3 variantenCombination of a borosilicate glass piece with ground joint, an interior PTFE shaft guide with integrated special gasket and a GL screw cap made of PPS. The special gasket made of PTFE and an FPM o-ring which is compressed by a GL screw cap provide a good sealing of the stirrer shaft. This gasket can be exchanged after wearing. Suitable for vacuum, perfect bearing for stirrer shafts made of stainless steel, glass and for BOLA Stirrer Shafts.
€64,59
Glass Stirrer Bearings, PTFE | For diam. stirring rod mm: 10, Overall length mm: 90, Thread GL: 25
Glass Stirrer Bearings, PTFE | For diam. stirring rod mm: 10, Overall length mm: 90, Thread GL: 25
Merk: Bohlender GmbHBeschikbaar in 3 variantenCombination of a borosilicate glass piece with ground joint, an interior PTFE shaft guide with integrated special gasket and a GL screw cap made of PPS. The special gasket made of PTFE and an FPM o-ring which is compressed by a GL screw cap provide a good sealing of the stirrer shaft. This gasket can be exchanged after wearing. Suitable for vacuum, perfect bearing for stirrer shafts made of stainless steel, glass and for BOLA Stirrer Shafts.
€91,63
Glass Stirrer Bearings, PTFE | For diam. stirring rod mm: 8, Overall length mm: 90, Thread GL: 25
Glass Stirrer Bearings, PTFE | For diam. stirring rod mm: 8, Overall length mm: 90, Thread GL: 25
Merk: Bohlender GmbHBeschikbaar in 3 variantenCombination of a borosilicate glass piece with ground joint, an interior PTFE shaft guide with integrated special gasket and a GL screw cap made of PPS. The special gasket made of PTFE and an FPM o-ring which is compressed by a GL screw cap provide a good sealing of the stirrer shaft. This gasket can be exchanged after wearing. Suitable for vacuum, perfect bearing for stirrer shafts made of stainless steel, glass and for BOLA Stirrer Shafts.
€92,18
Ground Joint GL Adapters, PTFE | Joint size NS: 29/32, Thread: GL 45
Ground Joint GL Adapters, PTFE | Joint size NS: 29/32, Thread: GL 45
Merk: Bohlender GmbHBeschikbaar in 4 variantenBlack, PPS screw cap with GL45 thread or blue PP, screw cap with GLS80 thread, movable insert with ground joint made of PTFE. Transition from a ground joint to a glass thread. The body can be turned independently from the screw cap. The complete, assembled adapter can be removed and fixed onto another bottle without the risk of disarranging the tubing. Very good chemical resistance, for working temperatures up to max. +250 °C.
€44,05
123456

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    Algemene voorwaarden    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Onze website maakt gebruik van cookies.
Zowel wij en onze derde partij partners maken gebruik van cookies. Sommige zijn strikt noodzakelijk om de site te laten functioneren, maar er bestaan ook optionele cookies.

De noodzakelijke en functionele cookies staan altijd aan. Als je op "alle cookies aanvaarden" klikt accepteer je ook de optionele cookies. Je kan zelf kiezen welke cookies je aan wil zetten via "voorkeuren instellen".

Onze website maakt gebruik van cookies.
Wat zijn cookies? Welke cookies gebruiken we en waarom? Lees meer in ons cookiebeleid

Noodzakelijke cookies

Cookies die onontbeerlijk zijn voor uw bezoek aan de Website en het correct gebruik daarvan

Functionele cookies

Cookies die uw bezoek aan de Website vergemakkelijken en aangenamer maken, onder meer door uw surfervaring te personaliseren.

Performantie cookies

Cookies die informatie verzamelen over uw gebruik van de Website met de bedoeling de inhoud van de Website te verbeteren en aan te passen aan de wensen van de Gebruiker.

Derde partij cookies

Cookies die geplaatst worden door derden die eigen diensten aanbieden via de Website zoals bijvoorbeeld social media, advertenties of videodiensten.