Even geduld

Uw bericht wordt verstuurd

Er is een fout opgetreden

Algemene labobenodigdheden

Analytisch meten en testen

Behandeling van vloeistoffen

Bescherming en veiligheid

Chromatografie

Cleanroom

Destillatie, scheiding, filtratie

Levenswetenschappen

Milieu-, bodem-, water-, voedselanalyse

Monstervoorbereiding

Optische instrumenten en microscopen

Reiniging en sterilisatie

Roeren, schudden, mengen

Vacuümtechnologie, drogen, droge opslag

Verwarmings- en koeltechnologie

Behr Labor-Technik GmbH
282930313233
Micro Kjeldahl block digestion systems K 16, K 24 and K 40 | Type : K 24, Description : with 24 sample slots, for digestion vesselswith a volume of 100 ml
Micro Kjeldahl block digestion systems K 16, K 24 and K 40 | Type : K 24, Description : with 24 sample slots, for digestion vesselswith a volume of 100 ml
Merk: Behr Labor-Technik GmbHBeschikbaar in 3 variantenBlock digestion systems with high-quality corrosion-resistant block housing made of stainless steel. With 16, 24 or 40 sample slots for micro Kjeldahl digestion vessels with a volume of 100 ml. High-efficiency heating and extraction hood with exhaust collector.behr single-knob control for particularly easy and fast programming.Menu navigation in national language.25 freely configurable programs for block temperature and digestion time.Applications can be saved.USB interface.The removable inspection door on the insertion rack enables the progress of the digestion to be observed.Complete systems with digestion vessels, rack and extraction hood.
€4.123,00
Micro Kjeldahl block digestion systems K 16, K 24 and K 40 | Type : K 40, Description : with 40 sample slots, for digestion vesselswith a volume of 100 ml
Micro Kjeldahl block digestion systems K 16, K 24 and K 40 | Type : K 40, Description : with 40 sample slots, for digestion vesselswith a volume of 100 ml
Merk: Behr Labor-Technik GmbHBeschikbaar in 3 variantenBlock digestion systems with high-quality corrosion-resistant block housing made of stainless steel. With 16, 24 or 40 sample slots for micro Kjeldahl digestion vessels with a volume of 100 ml. High-efficiency heating and extraction hood with exhaust collector.behr single-knob control for particularly easy and fast programming.Menu navigation in national language.25 freely configurable programs for block temperature and digestion time.Applications can be saved.USB interface.The removable inspection door on the insertion rack enables the progress of the digestion to be observed.Complete systems with digestion vessels, rack and extraction hood.
€5.635,00
Microseparator H13-3/29 DIN 38409
Microseparator H13-3/29 DIN 38409
€77,10
Mixed-bed ion exchanger made of stainless steel | Type : E28dA, Material : Stainless steel V 4A, Description : conductivity meter with limit switch and electrovalve
Mixed-bed ion exchanger made of stainless steel | Type : E28dA, Material : Stainless steel V 4A, Description : conductivity meter with limit switch and electrovalve
Merk: Behr Labor-Technik GmbHBeschikbaar in 6 variantenStandard cartridge made of V4A stainless steel for general purpose application: To supply laboratory glassware washers, for general laboratory maintenance and for small industrial consumers. For subsequent demineralization of reverse osmosis systems.pressure resistant to 10 bar / 8 bar at E40dAoptimum exploitation of the ion exchanger capacity due to absolute uniform water distribution in the unitflow rates up to 700 litres/hourthe unique behropur® jet nozzle system distributes the raw water over the entire resin bed. This ensures an optimum exchange capacity and qualitycan be connected to the raw water network directly and without a pressure reducerresistant to alternating pressurehard rubber collars vulcanized to the base and top of the unit offer effective protectionconvenient transport thanks to the handles embedded into the top part of the unitconductivity is controlled directly on the unit (installed measuring equipment) or with remote location meterAlso available with shut-off when the limit value is reached and limit control
€1.648,60
Mixed-bed ion exchanger made of stainless steel | Type : E40d, Material : Stainless steel V 4A, Description : complete with conductivity meter
Mixed-bed ion exchanger made of stainless steel | Type : E40d, Material : Stainless steel V 4A, Description : complete with conductivity meter
Merk: Behr Labor-Technik GmbHBeschikbaar in 6 variantenStandard cartridge made of V4A stainless steel for general purpose application: To supply laboratory glassware washers, for general laboratory maintenance and for small industrial consumers. For subsequent demineralization of reverse osmosis systems.pressure resistant to 10 bar / 8 bar at E40dAoptimum exploitation of the ion exchanger capacity due to absolute uniform water distribution in the unitflow rates up to 700 litres/hourthe unique behropur® jet nozzle system distributes the raw water over the entire resin bed. This ensures an optimum exchange capacity and qualitycan be connected to the raw water network directly and without a pressure reducerresistant to alternating pressurehard rubber collars vulcanized to the base and top of the unit offer effective protectionconvenient transport thanks to the handles embedded into the top part of the unitconductivity is controlled directly on the unit (installed measuring equipment) or with remote location meterAlso available with shut-off when the limit value is reached and limit control
€1.915,40
Mixed-bed ion exchanger made of stainless steel | Type : E40dA, Material : Nylon, Description : conductivity meter with limit switch and electrovalve
Mixed-bed ion exchanger made of stainless steel | Type : E40dA, Material : Nylon, Description : conductivity meter with limit switch and electrovalve
Merk: Behr Labor-Technik GmbHBeschikbaar in 6 variantenStandard cartridge made of V4A stainless steel for general purpose application: To supply laboratory glassware washers, for general laboratory maintenance and for small industrial consumers. For subsequent demineralization of reverse osmosis systems.pressure resistant to 10 bar / 8 bar at E40dAoptimum exploitation of the ion exchanger capacity due to absolute uniform water distribution in the unitflow rates up to 700 litres/hourthe unique behropur® jet nozzle system distributes the raw water over the entire resin bed. This ensures an optimum exchange capacity and qualitycan be connected to the raw water network directly and without a pressure reducerresistant to alternating pressurehard rubber collars vulcanized to the base and top of the unit offer effective protectionconvenient transport thanks to the handles embedded into the top part of the unitconductivity is controlled directly on the unit (installed measuring equipment) or with remote location meterAlso available with shut-off when the limit value is reached and limit control
€2.293,90
Mixed-bed ion exchanger made of stainless steel | Type : E40dZ, Material : Stainless steel V 4A, Description : spare cartridge
Mixed-bed ion exchanger made of stainless steel | Type : E40dZ, Material : Stainless steel V 4A, Description : spare cartridge
Merk: Behr Labor-Technik GmbHBeschikbaar in 6 variantenStandard cartridge made of V4A stainless steel for general purpose application: To supply laboratory glassware washers, for general laboratory maintenance and for small industrial consumers. For subsequent demineralization of reverse osmosis systems.pressure resistant to 10 bar / 8 bar at E40dAoptimum exploitation of the ion exchanger capacity due to absolute uniform water distribution in the unitflow rates up to 700 litres/hourthe unique behropur® jet nozzle system distributes the raw water over the entire resin bed. This ensures an optimum exchange capacity and qualitycan be connected to the raw water network directly and without a pressure reducerresistant to alternating pressurehard rubber collars vulcanized to the base and top of the unit offer effective protectionconvenient transport thanks to the handles embedded into the top part of the unitconductivity is controlled directly on the unit (installed measuring equipment) or with remote location meterAlso available with shut-off when the limit value is reached and limit control
€1.655,40
Mixed-bed ion exchanger made of stainless steel | Type: E28d, Material: Stainless steel V 4A, Description: complete with conductivity meter
Mixed-bed ion exchanger made of stainless steel | Type: E28d, Material: Stainless steel V 4A, Description: complete with conductivity meter
Merk: Behr Labor-Technik GmbHBeschikbaar in 6 variantenStandard cartridge made of V4A stainless steel for general purpose application: To supply laboratory glassware washers, for general laboratory maintenance and for small industrial consumers. For subsequent demineralization of reverse osmosis systems.pressure resistant to 10 bar / 8 bar at E40dAoptimum exploitation of the ion exchanger capacity due to absolute uniform water distribution in the unitflow rates up to 700 litres/hourthe unique behropur® jet nozzle system distributes the raw water over the entire resin bed. This ensures an optimum exchange capacity and qualitycan be connected to the raw water network directly and without a pressure reducerresistant to alternating pressurehard rubber collars vulcanized to the base and top of the unit offer effective protectionconvenient transport thanks to the handles embedded into the top part of the unitconductivity is controlled directly on the unit (installed measuring equipment) or with remote location meterAlso available with shut-off when the limit value is reached and limit control
€1.146,90
Mixed-bed ion exchanger made of stainless steel | Type: E28dZ, Material: Stainless steel V 4A, Description: spare cartridge
Mixed-bed ion exchanger made of stainless steel | Type: E28dZ, Material: Stainless steel V 4A, Description: spare cartridge
Merk: Behr Labor-Technik GmbHBeschikbaar in 6 variantenStandard cartridge made of V4A stainless steel for general purpose application: To supply laboratory glassware washers, for general laboratory maintenance and for small industrial consumers. For subsequent demineralization of reverse osmosis systems.pressure resistant to 10 bar / 8 bar at E40dAoptimum exploitation of the ion exchanger capacity due to absolute uniform water distribution in the unitflow rates up to 700 litres/hourthe unique behropur® jet nozzle system distributes the raw water over the entire resin bed. This ensures an optimum exchange capacity and qualitycan be connected to the raw water network directly and without a pressure reducerresistant to alternating pressurehard rubber collars vulcanized to the base and top of the unit offer effective protectionconvenient transport thanks to the handles embedded into the top part of the unitconductivity is controlled directly on the unit (installed measuring equipment) or with remote location meterAlso available with shut-off when the limit value is reached and limit control
€928,10
Mixing equipment BSB 2
Mixing equipment BSB 2
€3.089,00
Muffle furnaces behrotest® MO 8.0 | Capacity litres: 8, Rating kW: 1.8, Internal dimensions (W x D x H) mm: 310 x 135 x 195
Muffle furnaces behrotest® MO 8.0 | Capacity litres: 8, Rating kW: 1.8, Internal dimensions (W x D x H) mm: 310 x 135 x 195
Merk: Behr Labor-Technik GmbHCompact electronically heated behrotest muffle furnace MO 8.0 for heat treatment of various materials such as glass crucibles up to 1100 °C.Maximum furnace chamber temperature up to 1100 °CChamber volume 8 litresheating elements are embedded in vacuum-formed fibre insulation on four sides of the chamberStainless steel housingDoor opens upwardsSafety switchThe control panel is located under the door to save spaceMicroprocessor temperature controllerFast heat-up timesProtection against overheatingLow power consumption
€1.869,00
Multiple hotplate systems behrotest® | Type: HB 4, Description: 4 hotplates with metal protective grills, 94 mm diam., Dimensions (W x D x H) mm: 530 x 320 x 150/760*
Multiple hotplate systems behrotest® | Type: HB 4, Description: 4 hotplates with metal protective grills, 94 mm diam., Dimensions (W x D x H) mm: 530 x 320 x 150/760*
Merk: Behr Labor-Technik GmbHBeschikbaar in 6 variantenMultiple hotplate systems, 360 W, with individually adjustable heating controls and indidicator lights. Maximum surface temperature 400 °C.
€955,80
282930313233

Copyright © 2024 - Achrom nv - BE 0445.025.508    |    Algemene voorwaarden    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Onze website maakt gebruik van cookies.
Zowel wij en onze derde partij partners maken gebruik van cookies. Sommige zijn strikt noodzakelijk om de site te laten functioneren, maar er bestaan ook optionele cookies.

De noodzakelijke en functionele cookies staan altijd aan. Als je op "alle cookies aanvaarden" klikt accepteer je ook de optionele cookies. Je kan zelf kiezen welke cookies je aan wil zetten via "voorkeuren instellen".

Onze website maakt gebruik van cookies.
Wat zijn cookies? Welke cookies gebruiken we en waarom? Lees meer in ons cookiebeleid

Noodzakelijke cookies

Cookies die onontbeerlijk zijn voor uw bezoek aan de Website en het correct gebruik daarvan

Functionele cookies

Cookies die uw bezoek aan de Website vergemakkelijken en aangenamer maken, onder meer door uw surfervaring te personaliseren.

Performantie cookies

Cookies die informatie verzamelen over uw gebruik van de Website met de bedoeling de inhoud van de Website te verbeteren en aan te passen aan de wensen van de Gebruiker.

Derde partij cookies

Cookies die geplaatst worden door derden die eigen diensten aanbieden via de Website zoals bijvoorbeeld social media, advertenties of videodiensten.