Even geduld

Uw bericht wordt verstuurd

Er is een fout opgetreden

Universal Platform for MaxQ Shaker | For: MaxQ 8000, Dimensions (W x D) mm: 750 x 460
Universal Platform for MaxQ Shaker | For: MaxQ 8000, Dimensions (W x D) mm: 750 x 460
Merk: Thermo Elect.LED GmbH (Kendro)Beschikbaar in 16 varianten
€1.090,00
Upright Freezers TSX Series, up to -86 °C | Type: TSX40086V, Capacity l: 549, External dimensions (W x D x H) mm: 719 x 955 x 1981
Upright Freezers TSX Series, up to -86 °C | Type: TSX40086V, Capacity l: 549, External dimensions (W x D x H) mm: 719 x 955 x 1981
Merk: Thermo Elect.LED GmbH (Kendro)Beschikbaar in 4 variantenProtect your samples and reduce energy consumption with these environmentally friendly ultra-low freezers. Operating range -50 to -86 °C.Low maximum deviation of
€19.284,00
Upright Freezers TSX Series, up to -86 °C | Type: TSX50086V, Capacity l: 682, External dimensions (W x D x H) mm: 864 x 955 x 1981
Upright Freezers TSX Series, up to -86 °C | Type: TSX50086V, Capacity l: 682, External dimensions (W x D x H) mm: 864 x 955 x 1981
Merk: Thermo Elect.LED GmbH (Kendro)Beschikbaar in 4 variantenProtect your samples and reduce energy consumption with these environmentally friendly ultra-low freezers. Operating range -50 to -86 °C.Low maximum deviation of
€20.762,00
Upright Freezers TSX Series, up to -86 °C | Type: TSX60086V, Capacity l: 816, External dimensions (W x D x H) mm: 1006 x 955 x 1981
Upright Freezers TSX Series, up to -86 °C | Type: TSX60086V, Capacity l: 816, External dimensions (W x D x H) mm: 1006 x 955 x 1981
Merk: Thermo Elect.LED GmbH (Kendro)Beschikbaar in 4 variantenProtect your samples and reduce energy consumption with these environmentally friendly ultra-low freezers. Operating range -50 to -86 °C.Low maximum deviation of
€22.252,00
Upright Freezers TSX Series, up to -86 °C | Type: TSX70086V, Capacity l: 949, External dimensions (W x D x H) mm: 1148 x 955 x 1981
Upright Freezers TSX Series, up to -86 °C | Type: TSX70086V, Capacity l: 949, External dimensions (W x D x H) mm: 1148 x 955 x 1981
Merk: Thermo Elect.LED GmbH (Kendro)Beschikbaar in 4 variantenProtect your samples and reduce energy consumption with these environmentally friendly ultra-low freezers. Operating range -50 to -86 °C.Low maximum deviation of
€24.188,00
Vacuum oven 6000 | Type: VT 6060 M, Nominal capacity l: 53, Max. grids: 4
Vacuum oven 6000 | Type: VT 6060 M, Nominal capacity l: 53, Max. grids: 4
Merk: Thermo Elect.LED GmbH (Kendro)Beschikbaar in 8 variantenFor the careful, rapid drying and heat treatment of temperature sensitive substances and components in the electronics, pharmaceutical, cosmetic and biochemical industries.With electro-polished and internally welded, rectangular chamber made of 1.4571 stainless steel and silicone door seal. Also features analogue pressure display, stainless steel ball valve to control vacuum, rapid air ventilation valve, inert gas connection with pressure relief safety valve for controlled chamber purging and corrosion resistant vacuum fittings. Small flange (DN 25 KF) vacuum fittings are positioned on the rear panel of the cabinet. An overheat cut-out (Class 2) is supplied as standard. 53L models are supplied with two shelves, 128L models are supplied with three shelves.Type M, with heated jacket, range up to 200°C.Heat is conducted from the heated chamber through the shelves to the sample. The shelves are removeable. With Kelvitron® microprocessor temperature controller.Type P, with heated shelves, range up to 300°C (up to 400°C on request).Tubular heating elements in the shelves heat the sample directly, providing rapid heat-up and processing times. With individual shelf temperature control, a common temperature value is set for all plates. With Digicon® electronic temperature controller.Options for VT 6000:Inert gas connectionDigital pressure displayPressure controller with electronic valveViton door seal - TimersDigital sample temperature displayVariety of temperature controllersAnalogue interfaceMaximum temperature 400°C.Interface connection for central monitoringTemperature documentationCalibration certificateShelves - further options available on request. Fully equipped vacuum pump control station Vacucenter available as an accessory for Vacutherm 6060 and 6130 ovens. Choice of 3 different vacuum pumps available according to operating conditions.
€11.300,00
Vacuum oven 6000 | Type: VT 6060 M-BL, Nominal capacity l: 53, Max. grids: 4
Vacuum oven 6000 | Type: VT 6060 M-BL, Nominal capacity l: 53, Max. grids: 4
Merk: Thermo Elect.LED GmbH (Kendro)Beschikbaar in 8 variantenFor the careful, rapid drying and heat treatment of temperature sensitive substances and components in the electronics, pharmaceutical, cosmetic and biochemical industries.With electro-polished and internally welded, rectangular chamber made of 1.4571 stainless steel and silicone door seal. Also features analogue pressure display, stainless steel ball valve to control vacuum, rapid air ventilation valve, inert gas connection with pressure relief safety valve for controlled chamber purging and corrosion resistant vacuum fittings. Small flange (DN 25 KF) vacuum fittings are positioned on the rear panel of the cabinet. An overheat cut-out (Class 2) is supplied as standard. 53L models are supplied with two shelves, 128L models are supplied with three shelves.Type M, with heated jacket, range up to 200°C.Heat is conducted from the heated chamber through the shelves to the sample. The shelves are removeable. With Kelvitron® microprocessor temperature controller.Type P, with heated shelves, range up to 300°C (up to 400°C on request).Tubular heating elements in the shelves heat the sample directly, providing rapid heat-up and processing times. With individual shelf temperature control, a common temperature value is set for all plates. With Digicon® electronic temperature controller.Options for VT 6000:Inert gas connectionDigital pressure displayPressure controller with electronic valveViton door seal - TimersDigital sample temperature displayVariety of temperature controllersAnalogue interfaceMaximum temperature 400°C.Interface connection for central monitoringTemperature documentationCalibration certificateShelves - further options available on request. Fully equipped vacuum pump control station Vacucenter available as an accessory for Vacutherm 6060 and 6130 ovens. Choice of 3 different vacuum pumps available according to operating conditions.
€16.500,00
Vacuum oven 6000 | Type: VT 6060 P, Nominal capacity l: 53, Max. grids: 2
Vacuum oven 6000 | Type: VT 6060 P, Nominal capacity l: 53, Max. grids: 2
Merk: Thermo Elect.LED GmbH (Kendro)Beschikbaar in 8 variantenFor the careful, rapid drying and heat treatment of temperature sensitive substances and components in the electronics, pharmaceutical, cosmetic and biochemical industries.With electro-polished and internally welded, rectangular chamber made of 1.4571 stainless steel and silicone door seal. Also features analogue pressure display, stainless steel ball valve to control vacuum, rapid air ventilation valve, inert gas connection with pressure relief safety valve for controlled chamber purging and corrosion resistant vacuum fittings. Small flange (DN 25 KF) vacuum fittings are positioned on the rear panel of the cabinet. An overheat cut-out (Class 2) is supplied as standard. 53L models are supplied with two shelves, 128L models are supplied with three shelves.Type M, with heated jacket, range up to 200°C.Heat is conducted from the heated chamber through the shelves to the sample. The shelves are removeable. With Kelvitron® microprocessor temperature controller.Type P, with heated shelves, range up to 300°C (up to 400°C on request).Tubular heating elements in the shelves heat the sample directly, providing rapid heat-up and processing times. With individual shelf temperature control, a common temperature value is set for all plates. With Digicon® electronic temperature controller.Options for VT 6000:Inert gas connectionDigital pressure displayPressure controller with electronic valveViton door seal - TimersDigital sample temperature displayVariety of temperature controllersAnalogue interfaceMaximum temperature 400°C.Interface connection for central monitoringTemperature documentationCalibration certificateShelves - further options available on request. Fully equipped vacuum pump control station Vacucenter available as an accessory for Vacutherm 6060 and 6130 ovens. Choice of 3 different vacuum pumps available according to operating conditions.
€17.400,00
Vacuum oven 6000 | Type: VT 6060 P-BL, Nominal capacity l: 53, Max. grids: 2
Vacuum oven 6000 | Type: VT 6060 P-BL, Nominal capacity l: 53, Max. grids: 2
Merk: Thermo Elect.LED GmbH (Kendro)Beschikbaar in 8 variantenFor the careful, rapid drying and heat treatment of temperature sensitive substances and components in the electronics, pharmaceutical, cosmetic and biochemical industries.With electro-polished and internally welded, rectangular chamber made of 1.4571 stainless steel and silicone door seal. Also features analogue pressure display, stainless steel ball valve to control vacuum, rapid air ventilation valve, inert gas connection with pressure relief safety valve for controlled chamber purging and corrosion resistant vacuum fittings. Small flange (DN 25 KF) vacuum fittings are positioned on the rear panel of the cabinet. An overheat cut-out (Class 2) is supplied as standard. 53L models are supplied with two shelves, 128L models are supplied with three shelves.Type M, with heated jacket, range up to 200°C.Heat is conducted from the heated chamber through the shelves to the sample. The shelves are removeable. With Kelvitron® microprocessor temperature controller.Type P, with heated shelves, range up to 300°C (up to 400°C on request).Tubular heating elements in the shelves heat the sample directly, providing rapid heat-up and processing times. With individual shelf temperature control, a common temperature value is set for all plates. With Digicon® electronic temperature controller.Options for VT 6000:Inert gas connectionDigital pressure displayPressure controller with electronic valveViton door seal - TimersDigital sample temperature displayVariety of temperature controllersAnalogue interfaceMaximum temperature 400°C.Interface connection for central monitoringTemperature documentationCalibration certificateShelves - further options available on request. Fully equipped vacuum pump control station Vacucenter available as an accessory for Vacutherm 6060 and 6130 ovens. Choice of 3 different vacuum pumps available according to operating conditions.
€23.000,00
Vacuum oven 6000 | Type: VT 6130 M, Nominal capacity l: 128, Max. grids: 5
Vacuum oven 6000 | Type: VT 6130 M, Nominal capacity l: 128, Max. grids: 5
Merk: Thermo Elect.LED GmbH (Kendro)Beschikbaar in 8 variantenFor the careful, rapid drying and heat treatment of temperature sensitive substances and components in the electronics, pharmaceutical, cosmetic and biochemical industries.With electro-polished and internally welded, rectangular chamber made of 1.4571 stainless steel and silicone door seal. Also features analogue pressure display, stainless steel ball valve to control vacuum, rapid air ventilation valve, inert gas connection with pressure relief safety valve for controlled chamber purging and corrosion resistant vacuum fittings. Small flange (DN 25 KF) vacuum fittings are positioned on the rear panel of the cabinet. An overheat cut-out (Class 2) is supplied as standard. 53L models are supplied with two shelves, 128L models are supplied with three shelves.Type M, with heated jacket, range up to 200°C.Heat is conducted from the heated chamber through the shelves to the sample. The shelves are removeable. With Kelvitron® microprocessor temperature controller.Type P, with heated shelves, range up to 300°C (up to 400°C on request).Tubular heating elements in the shelves heat the sample directly, providing rapid heat-up and processing times. With individual shelf temperature control, a common temperature value is set for all plates. With Digicon® electronic temperature controller.Options for VT 6000:Inert gas connectionDigital pressure displayPressure controller with electronic valveViton door seal - TimersDigital sample temperature displayVariety of temperature controllersAnalogue interfaceMaximum temperature 400°C.Interface connection for central monitoringTemperature documentationCalibration certificateShelves - further options available on request. Fully equipped vacuum pump control station Vacucenter available as an accessory for Vacutherm 6060 and 6130 ovens. Choice of 3 different vacuum pumps available according to operating conditions.
€16.300,00
Vacuum oven 6000 | Type: VT 6130 M-BL, Nominal capacity l: 128, Max. grids: 5
Vacuum oven 6000 | Type: VT 6130 M-BL, Nominal capacity l: 128, Max. grids: 5
Merk: Thermo Elect.LED GmbH (Kendro)Beschikbaar in 8 variantenFor the careful, rapid drying and heat treatment of temperature sensitive substances and components in the electronics, pharmaceutical, cosmetic and biochemical industries.With electro-polished and internally welded, rectangular chamber made of 1.4571 stainless steel and silicone door seal. Also features analogue pressure display, stainless steel ball valve to control vacuum, rapid air ventilation valve, inert gas connection with pressure relief safety valve for controlled chamber purging and corrosion resistant vacuum fittings. Small flange (DN 25 KF) vacuum fittings are positioned on the rear panel of the cabinet. An overheat cut-out (Class 2) is supplied as standard. 53L models are supplied with two shelves, 128L models are supplied with three shelves.Type M, with heated jacket, range up to 200°C.Heat is conducted from the heated chamber through the shelves to the sample. The shelves are removeable. With Kelvitron® microprocessor temperature controller.Type P, with heated shelves, range up to 300°C (up to 400°C on request).Tubular heating elements in the shelves heat the sample directly, providing rapid heat-up and processing times. With individual shelf temperature control, a common temperature value is set for all plates. With Digicon® electronic temperature controller.Options for VT 6000:Inert gas connectionDigital pressure displayPressure controller with electronic valveViton door seal - TimersDigital sample temperature displayVariety of temperature controllersAnalogue interfaceMaximum temperature 400°C.Interface connection for central monitoringTemperature documentationCalibration certificateShelves - further options available on request. Fully equipped vacuum pump control station Vacucenter available as an accessory for Vacutherm 6060 and 6130 ovens. Choice of 3 different vacuum pumps available according to operating conditions.
€21.000,00
Vacuum oven 6000 | Type: VT 6130 P, Nominal capacity l: 128, Max. grids: 3
Vacuum oven 6000 | Type: VT 6130 P, Nominal capacity l: 128, Max. grids: 3
Merk: Thermo Elect.LED GmbH (Kendro)Beschikbaar in 8 variantenFor the careful, rapid drying and heat treatment of temperature sensitive substances and components in the electronics, pharmaceutical, cosmetic and biochemical industries.With electro-polished and internally welded, rectangular chamber made of 1.4571 stainless steel and silicone door seal. Also features analogue pressure display, stainless steel ball valve to control vacuum, rapid air ventilation valve, inert gas connection with pressure relief safety valve for controlled chamber purging and corrosion resistant vacuum fittings. Small flange (DN 25 KF) vacuum fittings are positioned on the rear panel of the cabinet. An overheat cut-out (Class 2) is supplied as standard. 53L models are supplied with two shelves, 128L models are supplied with three shelves.Type M, with heated jacket, range up to 200°C.Heat is conducted from the heated chamber through the shelves to the sample. The shelves are removeable. With Kelvitron® microprocessor temperature controller.Type P, with heated shelves, range up to 300°C (up to 400°C on request).Tubular heating elements in the shelves heat the sample directly, providing rapid heat-up and processing times. With individual shelf temperature control, a common temperature value is set for all plates. With Digicon® electronic temperature controller.Options for VT 6000:Inert gas connectionDigital pressure displayPressure controller with electronic valveViton door seal - TimersDigital sample temperature displayVariety of temperature controllersAnalogue interfaceMaximum temperature 400°C.Interface connection for central monitoringTemperature documentationCalibration certificateShelves - further options available on request. Fully equipped vacuum pump control station Vacucenter available as an accessory for Vacutherm 6060 and 6130 ovens. Choice of 3 different vacuum pumps available according to operating conditions.
€26.258,00

Onze website maakt gebruik van cookies.
Zowel wij en onze derde partij partners maken gebruik van cookies. Sommige zijn strikt noodzakelijk om de site te laten functioneren, maar er bestaan ook optionele cookies.

De noodzakelijke en functionele cookies staan altijd aan. Als je op "alle cookies aanvaarden" klikt accepteer je ook de optionele cookies. Je kan zelf kiezen welke cookies je aan wil zetten via "voorkeuren instellen".

Onze website maakt gebruik van cookies.
Wat zijn cookies? Welke cookies gebruiken we en waarom? Lees meer in ons cookiebeleid

Noodzakelijke cookies

Cookies die onontbeerlijk zijn voor uw bezoek aan de Website en het correct gebruik daarvan

Functionele cookies

Cookies die uw bezoek aan de Website vergemakkelijken en aangenamer maken, onder meer door uw surfervaring te personaliseren.

Performantie cookies

Cookies die informatie verzamelen over uw gebruik van de Website met de bedoeling de inhoud van de Website te verbeteren en aan te passen aan de wensen van de Gebruiker.

Derde partij cookies

Cookies die geplaatst worden door derden die eigen diensten aanbieden via de Website zoals bijvoorbeeld social media, advertenties of videodiensten.