Even geduld

Uw bericht wordt verstuurd

Er is een fout opgetreden

Algemene labobenodigdheden

Analytisch meten en testen

Behandeling van vloeistoffen

Bescherming en veiligheid

Chromatografie

Cleanroom

Destillatie, scheiding, filtratie

Levenswetenschappen

Milieu-, bodem-, water-, voedselanalyse

Monstervoorbereiding

Optische instrumenten en microscopen

Reiniging en sterilisatie

Roeren, schudden, mengen

Vacuümtechnologie, drogen, droge opslag

Verwarmings- en koeltechnologie

293031323334
Safety drying oven FDL | Type: FDL 115, Nominal capacity: 115 l, Temperature: RT+10 ... 300 °C
Safety drying oven FDL | Type: FDL 115, Nominal capacity: 115 l, Temperature: RT+10 ... 300 °C
Merk: BINDER GmbHA safety drying oven from BINDER ensures the perfect test result of your solvent-based paints and coatings, absolute temperature precision even with high ventilation.Defined solvent quantity according to EN 1539Electronically controlled APT.line™ preheating chamber technologyTemperature range: from 10 °C above ambient temperature to 300 °CIndependent adjustable temperature safety device class 2 (DIN 12880), with visual temperature alarmRS 422 interface for use with APT-COM™ DataControlSystem communication softwarePower supply 230 V, 50/60 HzThe number of shelves included in the scope of delivery is listed in the table.
€10.133,00
Safety temperature switch TEMPAT®-Control | Type: TEMPAT®-Control Fe-CuNi, Temp. range °C: 0 - 600
Safety temperature switch TEMPAT®-Control | Type: TEMPAT®-Control Fe-CuNi, Temp. range °C: 0 - 600
Merk: messner emtronicBeschikbaar in 3 variantenSafety temperature switch for monitoring temperature-based routines of all kinds. Ideal for monitoring simple temperature controllers. The TEMPAT® Control device switches off when the limit temperature is obtained; a beep is heard. When the temperature drops below limit, the limit contact does not switch on automatically; it must be reset by the user.
€293,76
Sample hydrolysis and digestion vessels | Type: Standard, Capacity ml: 100, Max. temp. °C: 140
Sample hydrolysis and digestion vessels | Type: Standard, Capacity ml: 100, Max. temp. °C: 140
Merk: Bohlender GmbHBeschikbaar in 4 variantenFor the digestion of small sample volumes up to 0.5g in microwave ovens. Made of isostatically pressed, high-grade PTFE (TFM). The chemical resistance and usual PTFE properties remain unchanged. TFM is a modified PTFE by Hoechst and contains thermoplastic elements. This gives rise to a homogeneous, non-porous surface. Contaminating residues from earlier digestions are therefore avoided. Resists pressure deformation (to max. 25 bar) and temperature (max. 160 °C). An accessory burst-proof, sealing membrane prevents loss of volatile compounds and provides safety against overpressure. Optional digestion vessels with interchangeable inserts (internal liners) enable precise weighing-in (in most cases the complete vessels would be too heavy for balances). In addition, different digestion processes can be carried out in only one basic vessel by using several inserts.
€688,55
Sand Baths with Performance Control and Thermostatic Controller | Type: ST 82, Min. operating temperature RT + °C: 50, Max. operating temperature °C: 300
Sand Baths with Performance Control and Thermostatic Controller | Type: ST 82, Min. operating temperature RT + °C: 50, Max. operating temperature °C: 300
Merk: Harry Gestigkeit GmbHBeschikbaar in 11 variantenFor continuous operation. Electrical sand baths with thermostatic temperature control and separate power controller for performance adjustment to the heating requirements. Anodised aluminium alloy hotplate. Excellent uniform temperature distribution over the entire heating surface. Asbestos free. The sand bath frame is tightly screwed onto the hotplate so that the sand is in direct contact with the hotplate. Useful depth 50mm. Stainless steel controller housing, with painted central section. Height-adjustable feet. Connection cable approximately 1.7m. With earthed plug for 230V supplies up to 3300W. A 400V 3-phase model is also available.
€1.574,00
Sandbaths with Performance Control | Type: SD 7, with EU-plug, Min. operating temperature RT + °C: 5, Max. operating temperature °C: 370
Sandbaths with Performance Control | Type: SD 7, with EU-plug, Min. operating temperature RT + °C: 5, Max. operating temperature °C: 370
Merk: Harry Gestigkeit GmbHBeschikbaar in 4 variantenFor continuous operation. Electrical sand baths with thermostatic temperature control and separate power controller for performance adjustment to the heating requirements. Anodised aluminium alloy hotplate. Excellent uniform temperature distribution over the entire heating surface. Asbestos free. The sand bath frame is tightly screwed onto the hotplate so that the sand is in direct contact with the hotplate. Useful depth 50 mm. Stainless steel controller housing, with painted central section. Height-adjustable feet. Connection cable approximately 1.7 m. With earthed plug for 230 V supplies up to 3300 W. A 400V 3-phase model is also available.
€1.134,00
Sealing and Rupture Membranes, PFA, PTFE | Volume ml: 50 + 100
Sealing and Rupture Membranes, PFA, PTFE | Volume ml: 50 + 100
Merk: Bohlender GmbHBeschikbaar in 3 varianten1 set consisting of 10 sealing membranes made of PFA and 10 rupture membranes made of PTFE, for digestion vessels.
€40,84
Serial heating units series KM-R3 | Capacity ml: 1000, Flask diam. mm: 131, Power W: 495
Serial heating units series KM-R3 | Capacity ml: 1000, Flask diam. mm: 131, Power W: 495
Merk: ISOHEAT GmbHBeschikbaar in 2 variantenLabHEAT®-Heating elements for flasks, round bottom. Serial heating unit in plastic coated, chemical-resistant metal housing (W x H x D) 580 x 150 x 290 mm with three heating positions. Each heating position is separately controlled via controller, 1.5 m supply (earthed) cable and RCD (residual current detection); nominal voltage 230 V AC.
€1.309,00
Serial heating units series KM-R6 | Capacity ml: 250, Flask diam. mm: 85, Power W: 220
Serial heating units series KM-R6 | Capacity ml: 250, Flask diam. mm: 85, Power W: 220
Merk: ISOHEAT GmbHBeschikbaar in 4 variantenLabHEAT®-Heating elements for flasks, round bottom. Serial heating unit in plastic coated, chemical-resistant metal housing with six heating positions. Each heating position is separately controlled via controller, 1.5m supply (earthed) cable and RCD (residual current detection); nominal voltage 230V AC. Dimensions (W x D x H): 1150 x 290 x 150 mm.
€1.676,00
Shaker platform for incubator shaker INC 125 FS digital | Type: IO SP 20, Description: Shaker platform with 20 mm shaking stroke, For: INC 125 FS digital
Shaker platform for incubator shaker INC 125 FS digital | Type: IO SP 20, Description: Shaker platform with 20 mm shaking stroke, For: INC 125 FS digital
Merk: IKA-Werke GmbH & Co.KGBeschikbaar in 2 variantenClamps can be attached to the shaker platform for safe shaking of Erlenmeyer flasks.Please order clamps separately.
€1.994,00
Shaking device for waterbaths WTB | For model: WTB15 / WTB24, 230 V, 50/60 Hz
Shaking device for waterbaths WTB | For model: WTB15 / WTB24, 230 V, 50/60 Hz
Merk: Memmert GmbH + Co. KGBeschikbaar in 4 variantenShaking device for waterbaths incl. support frame, shaking frequency 35 - 160 strokes per minute (horizontal back/forth movement), requires gable cover. Voltage 230 V, 50/60 Hz. Please order the support basket separately.
€905,00
Shaking Incubator 211DS | Type: 211DS
Shaking Incubator 211DS | Type: 211DS
Merk: Corning BVDue to a small footprint, compact, stackable design and expanded temperature range, this shaking incubator is ideal for molecular biology and general use. With integral orbital shaker. Two full and one half shelves are supplied with each incubator.Temperature control system SmartChek™Internal electrical outletFlask capacity: 4 x 1 l, 5 x 500 ml, 9 x 250 ml or 16 x 125 mlGasket door with large viewing area
€4.922,84
Shaking Incubator 311DS | Type: 311DS
Shaking Incubator 311DS | Type: 311DS
Merk: Corning BVIncubator with built-in orbital shaker. Stable temperature conditions and a broad temperature range enables the use of this incubator for cell cultures, washing blots, bacterial cultures, yeast cultures, entomology studies, egg hatching, hybridization washes, mixing and re-suspensions. Opening the door stops operation of the shaker. The incubator is supplied with one shelf.Temperature control system SmartChek™Broad temperature rangeHigh uniformity and accuracyGasket door with large viewing areaAdjustable shelvesFlat platform with non-slip rubber mat, flask platforms, additional shelves please order separately.
€5.812,04
293031323334

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    Algemene voorwaarden    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Onze website maakt gebruik van cookies.
Zowel wij en onze derde partij partners maken gebruik van cookies. Sommige zijn strikt noodzakelijk om de site te laten functioneren, maar er bestaan ook optionele cookies.

De noodzakelijke en functionele cookies staan altijd aan. Als je op "alle cookies aanvaarden" klikt accepteer je ook de optionele cookies. Je kan zelf kiezen welke cookies je aan wil zetten via "voorkeuren instellen".

Onze website maakt gebruik van cookies.
Wat zijn cookies? Welke cookies gebruiken we en waarom? Lees meer in ons cookiebeleid

Noodzakelijke cookies

Cookies die onontbeerlijk zijn voor uw bezoek aan de Website en het correct gebruik daarvan

Functionele cookies

Cookies die uw bezoek aan de Website vergemakkelijken en aangenamer maken, onder meer door uw surfervaring te personaliseren.

Performantie cookies

Cookies die informatie verzamelen over uw gebruik van de Website met de bedoeling de inhoud van de Website te verbeteren en aan te passen aan de wensen van de Gebruiker.

Derde partij cookies

Cookies die geplaatst worden door derden die eigen diensten aanbieden via de Website zoals bijvoorbeeld social media, advertenties of videodiensten.