Even geduld

Uw bericht wordt verstuurd

Er is een fout opgetreden

Algemene labobenodigdheden

Analytisch meten en testen

Behandeling van vloeistoffen

Bescherming en veiligheid

Chromatografie

Cleanroom

Destillatie, scheiding, filtratie

Levenswetenschappen

Milieu-, bodem-, water-, voedselanalyse

Monstervoorbereiding

Optische instrumenten en microscopen

Reiniging en sterilisatie

Roeren, schudden, mengen

Vacuümtechnologie, drogen, droge opslag

Verwarmings- en koeltechnologie

439440441442443444
Immersion stirrer ZU 6955 for pH meter 765/766 and conductivity meter 703 | Type: ZU 6955, Dimensions mm: 250 x Ø 25, Immersion depth mm: 90
Immersion stirrer ZU 6955 for pH meter 765/766 and conductivity meter 703 | Type: ZU 6955, Dimensions mm: 250 x Ø 25, Immersion depth mm: 90
Merk: Knick ElektronischeThe immersion stirrer reduces electrode response time for measurement and calibration. Stainless steel impeller Ø 12 mm.Please order power supply unit and attachable stand for fixing the immersion stirrer separately.
€334,00
Immersion thermostat IC basic | Type: ICC basic immersion thermostat
Immersion thermostat IC basic | Type: ICC basic immersion thermostat
Merk: IKA-Werke GmbH & Co.KGImmersion thermostat for tempering of liquids in open or covered vessels up to a temperature of 250 °C. With integrated, extendable bath bridge for hanging in bath tanks of various sizes. The integrated, adjustable pressure and suction pump allows the IC basic to be used for internal or external applications. An optional cooling coil can be connected to the unit for temperature control below or near the ambient temperature. The IC basic ensures fast heat-up times and stable temperature conditions and can be used even with flammable liquids.Complete packages with all necessary components (bath vessels, covers, bath bridges, pump connection sets and cooling coils) are also available.Visual and acoustic warning functions for excess temperature, sub-level and over-levelLED display for adjustment of relevant parametersMenu navigation via push and turn buttonsAdjustable safety circuitIntegrated M16 x 1 connectors for external applicationsConnection for external Pt100 temperature probeUSB/RS 232 interface
€2.981,00
Immersion tip for testo measuring devices | Description: Immersion tip for air/exhaust gases, Measuring range °C: -40 ... 1000, Length: 1000 mm
Immersion tip for testo measuring devices | Description: Immersion tip for air/exhaust gases, Measuring range °C: -40 ... 1000, Length: 1000 mm
Merk: Testo SE & CO KGaABeschikbaar in 4 variantenFlexible. With TC plug, type K.
€58,00
Immuno Tubes | Type: Liquid phase, MiniSorp, Material: PE, Volume ml: 4
Immuno Tubes | Type: Liquid phase, MiniSorp, Material: PE, Volume ml: 4
Merk: Thermo Elect.LED GmbH (Nunc)Beschikbaar in 5 variantenThermo Scientific™ Immuno tubes are suitable for ELISA, solid phase RIA and liquid phase RIA assays. With two different surface options for optimal binding.Thermo Scientific™ MaxiSorp™ is a hydrophilic surface optimized for the binding of IgG and also provides increased binding of many other proteins and biomolecules with hydrophilic/hydrophobic characteristics.Thermo Scientific™ MiniSorp™ is a polyethylene based material that forms a low binding surface.Tubes for liquid phase immunoassays: Includes RIA, for storage of reagents or collection of chromatographic fractions.Tubes for solid phase immunoassays: Such as IRMA, ELISA and ILMA.Tubes StarTube: Increase assay sensitivity and reduce incubation times. Recommended for ELISA, solid phase RIA assays, liquid phase RIA assays and sample storage.
€389,00
Impellers for Overhead Stirrers | Type: Blade stirrer BR 13, Material: V 2A, Dimensions mm: 70 x 70
Impellers for Overhead Stirrers | Type: Blade stirrer BR 13, Material: V 2A, Dimensions mm: 70 x 70
Merk: Heidolph InstrumentsBeschikbaar in 14 variantenPowerful StirringShaft diameter: 8mmBlade and Half-Moon ImpellerThese impellers are recommended for applications which require an average speedFor mixing products with average viscosityModels BR 12, BR 14 and HR 18 come with collapsible blade for narrow neck vesselsPropeller-Type ImpellerThese impellers are recommended for applications which require an average or high speedFor mixing products with medium or high viscosityExcellent mixing properties for homogenisation and suspensionsThese models create an axial flowRadial Flow ImpellerThese impellers are recommended for applications which require an average speedFor mixing products with average viscosity up to
€77,00
Impellers VISCO JET® | Material: V4A, For Vessels mm: 170-300, Ø agitator shaft mm: 10
Impellers VISCO JET® | Material: V4A, For Vessels mm: 170-300, Ø agitator shaft mm: 10
Merk: Heidolph InstrumentsBeschikbaar in 7 variantenThe worldwide patented VISCO JET® Mixing System is the result of the so-called cone-principle. Turbulent flows are created at the taper end by acceleration, displacement and retardation. These flows advance through the stirred medium and result in the new dynamic mixing motion.One system for literally all mixing tasks for low to high viscosity mediaPatented cone-principle creates even at low speeds a turbulent flow which is unique to the VISCO JET®Even with high-viscosity media and gels which naturally do not mix by using common impellers you will observe an immediate flow through the entire beakerThis technology allows for de-gassing of gels while preventing air intake and foamingReduce process times significantly while performing the best mixing result everThe stirring systems are made of stainless steel (V4A or AISI 316 Ti) or polyoxymethylene (POM).
€526,00
Impulse generator polystar®120 GE | Description: Impulse generator polystar® 120 GE, Width mm: 246, Depth mm: 195
Impulse generator polystar®120 GE | Description: Impulse generator polystar® 120 GE, Width mm: 246, Depth mm: 195
Merk: Rische + Herfurth GmbHFor impulse heat sealing tongs 9.106 837 and 9.106 838.
€496,00
Impulse heat sealing tongs polystar® 120 GE | Type: 300 D, Length*: 300, Weight g: 800
Impulse heat sealing tongs polystar® 120 GE | Type: 300 D, Length*: 300, Weight g: 800
Merk: Rische + Herfurth GmbHBeschikbaar in 2 variantenDouble impulse heating. LED readout allows a visual check on the sealing progress. Pressure switch triggers the welding process. A special pressure switch for generating the heat impulse guarantees constant welding results. Includes 3m connection cable.
€502,00
In-Line Filter holder, PC | Filter diam. mm: 50, Connection: M 12x1, Colour: Transparent
In-Line Filter holder, PC | Filter diam. mm: 50, Connection: M 12x1, Colour: Transparent
Merk: Sartorius Lab InstrumentsThe filter holder made of PC is suitable for filtration of aqueous solutions. The bell-shaped base part protects the filtrate from contamination. Hose nipples can be replaced by Luer connectors to use as syringe filter holder.Suitable for Ø 50 mm filterConnection to peristaltic pump or pressure container possibleM 12x1 female threadMax. operating pressure 7 barAutoclavable
€275,00
In-line filters Midisart® 2000 | Filter diam. mm: 62, Pore size µm: 0.45, Connection: Hose barb
In-line filters Midisart® 2000 | Filter diam. mm: 62, Pore size µm: 0.45, Connection: Hose barb
Merk: Sartorius Stedim Biotech GmbHBeschikbaar in 10 variantenFor sterile ventilation of fermenters, culture vessels, etc. or to act as a water barrier between the suction flask and the vacuum pump in filtration applications. The supported PTFE membrane within a PP housing gives excellent chemical resistance. Filter in either direction (3 bar max. pressure).Stepped horse-barb of 6-12 mm on either sidessterile single packed filters, autoclavable
€193,70
In-line valves | Type : VS 25C, Description : KF DN 25, Valve bore mm : 25
In-line valves | Type : VS 25C, Description : KF DN 25, Valve bore mm : 25
Merk: Vacuubrand GmbH & Co.KGBeschikbaar in 6 variantenButterfly design. Housing made of stainless steel with fluoroelastomer seal. Two Buna-N rings act as rotary shaft seals. Helium leak-tested. Leak rate 1 x 10-6 mbar x l/s. Excellent throughput.
€539,00
In-Line-Filter, disposable, Polydisc TF™ | Pore size µm: 0.45
In-Line-Filter, disposable, Polydisc TF™ | Pore size µm: 0.45
Merk: Cytiva Europe GmbHBeschikbaar in 4 variantenMounted in a robust PP housing. All have a low hold-up volume. Dimensions: (diameter x length) 53 x 46mm.Connections: For 6mm to 10mm diameter bore tubing. Also accept male luer slip.Hydrophobic PTFE membranePore sizes 0.1µm, 0.2µm, 0.45µm, 1.0µm1µm pore size unit has a PP prefilterAutoclavable at 131°C for 20 minutesMaximum operating pressure 4.0 barSuitable for chemically aggressive solutions, reagents and organic solvents. Ideal for protective venting, in-line filtration and isolation applications. Non-sterile.
€158,84
439440441442443444

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    Algemene voorwaarden    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Onze website maakt gebruik van cookies.
Zowel wij en onze derde partij partners maken gebruik van cookies. Sommige zijn strikt noodzakelijk om de site te laten functioneren, maar er bestaan ook optionele cookies.

De noodzakelijke en functionele cookies staan altijd aan. Als je op "alle cookies aanvaarden" klikt accepteer je ook de optionele cookies. Je kan zelf kiezen welke cookies je aan wil zetten via "voorkeuren instellen".

Onze website maakt gebruik van cookies.
Wat zijn cookies? Welke cookies gebruiken we en waarom? Lees meer in ons cookiebeleid

Noodzakelijke cookies

Cookies die onontbeerlijk zijn voor uw bezoek aan de Website en het correct gebruik daarvan

Functionele cookies

Cookies die uw bezoek aan de Website vergemakkelijken en aangenamer maken, onder meer door uw surfervaring te personaliseren.

Performantie cookies

Cookies die informatie verzamelen over uw gebruik van de Website met de bedoeling de inhoud van de Website te verbeteren en aan te passen aan de wensen van de Gebruiker.

Derde partij cookies

Cookies die geplaatst worden door derden die eigen diensten aanbieden via de Website zoals bijvoorbeeld social media, advertenties of videodiensten.