Even geduld

Uw bericht wordt verstuurd

Er is een fout opgetreden

Algemene labobenodigdheden

Analytisch meten en testen

Behandeling van vloeistoffen

Bescherming en veiligheid

Chromatografie

Cleanroom

Destillatie, scheiding, filtratie

Levenswetenschappen

Milieu-, bodem-, water-, voedselanalyse

Monstervoorbereiding

Optische instrumenten en microscopen

Reiniging en sterilisatie

Roeren, schudden, mengen

Vacuümtechnologie, drogen, droge opslag

Verwarmings- en koeltechnologie

470471472473474475
Laboratory chiller LABOCOOL LC 200 | Type: LABOCOOL LC 200
Laboratory chiller LABOCOOL LC 200 | Type: LABOCOOL LC 200
Merk: Bandelin electronicThe laboratory chiller LABOCOOL LC 200 is used to remove process heat and was specially developed for cooling samples in open vessels during sonication with a SONOPULS ultrasonic homogeniser. The LC 200 is characterised by a closed water circuit without an equalisation tank. This allows a constant water level in the sonication vessel and prevents overflow.Digital display shows water temperature and status of the cooling functionPowerful peristaltic pump with adjustable volume flowPractical recessed grips in the housingEnvironmentally friendly thanks to natural refrigerant R-290Protection class IIncl. connection material and hose (4 m)
€3.945,00
Laboratory chiller LABOCOOL LC 400 | Type: LABOCOOL LC 400, Plug type: EU
Laboratory chiller LABOCOOL LC 400 | Type: LABOCOOL LC 400, Plug type: EU
Merk: Bandelin electronicBeschikbaar in 2 variantenThe laboratory chiller LABOCOOL LC 400 is used to remove process heat and was specially developed for cooling samples during sonication in an ultrasonic bath. The LC 400 is characterised by a closed water circuit without an equalisation tank. This prevents the ultrasonic bath from overflowing.Digital display shows water temperature and status of the cooling functionPowerful centrifugal pumpPractical recessed grips in the housingEnvironmentally friendly thanks to natural refrigerant R-290Suitable for all SONOREX ultrasonic baths with bottom drainProtection class IIncl. connecting hub, three-way ball valve and hose (3 m)
€3.899,00
Laboratory coat AlphaTec® 2000, model 209 | Size: M
Laboratory coat AlphaTec® 2000, model 209 | Size: M
Merk: Ansell Healthcare Europe N.V.Beschikbaar in 5 variantenLaboratory coat made of microporous polyethylene laminate fleece.Protection against spray liquids and fine dust with low hazardCATEGORY III (Type PB (6) -B, EN 14126)High wearing comfortPermeable to water vapour ("breathable")Low lintFront zip1 breast pocket1 side pocketFelled seams
€440,40
Laboratory coat ASPURE, for cleanroom, Polyester, with zip | Size: L, Colour: white
Laboratory coat ASPURE, for cleanroom, Polyester, with zip | Size: L, Colour: white
Merk: As One CorporationBeschikbaar in 10 variantenAvailable in two different colour versionsWith incorporated rubber bands at the cuffsAnti-static protectionWith conductive yarnSurface resistance: 106 - 108Ω
€28,50
Laboratory coat Kimtech™ A7 P+, PP | Size: XL
Laboratory coat Kimtech™ A7 P+, PP | Size: XL
Merk: Kimberly-Clark GmbHBeschikbaar in 5 variantenCertified PPE Cat III acc. to directive 89/686/EECType 6 limited chemical splash protectionMicro-organism protection testedEN1149-1:1995 Antistatic clothingHigh performance chemical resistant fabricLow lint fabric, Helmke Drum Category II99% particle and bacterial filtration efficiencyIndividually packed, 15 p. in an outer package for ISO 7 Grade C areasSilicon-FreeAbrasion-resistant film-coated polypropyleneMandarin collarElastic cuff, thumb-loops and extra-length armsHigh strength triple stitched seams
€197,46
Laboratory Coat Tyvek® 500, PL309 | Size: S
Laboratory Coat Tyvek® 500, PL309 | Size: S
Merk: DuPont de NemoursBeschikbaar in 4 variantenProtective coat DuPont™ Tyvek® PL309, size S - XXL, 2 pockets, with zipper, white, PE-Spunbond non-woven.Tyvek® garments are composed of flash spun high density polyethylene, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 micron in size), is ultra-low-linting and antistatically treated. Silicon non-added.
€445,05
Laboratory Conductivity meter 703 | Type: 703
Laboratory Conductivity meter 703 | Type: 703
Merk: Knick ElektronischeBenchtop meter for electrolytic conductivity measurement in the laboratory. The unit can be operated with either 2-pole or 4-pole measuring cells. Temperature compensation is automatic with Pt 1000 / NTC 30 kOhm temperature sensors or manual.Large, bright LED displayRobust housing with stainless steel coverSensoface® monitors sensor and measuring equipmentDevice self-test Fullcheck® checks the functionality of the deviceAutomatic calibration with standard solutionsProtocols for QM documentation according to DIN ISO 9000 and GLPRS232 interface
€2.455,00
Laboratory dishes Nalgene™, PP | Nominal capacity: 5000 ml
Laboratory dishes Nalgene™, PP | Nominal capacity: 5000 ml
Merk: Thermo Elect.LED GmbH (Nalge)Beschikbaar in 4 variantenFor storing, cleaning and autoclaving instruments and small laboratory parts.Rounded cornersStackableAutoclavable
€65,17
Laboratory dissecting set | Type: Laboratory-Set
Laboratory dissecting set | Type: Laboratory-Set
Merk: BOCHEM Instrumente GmbHFour basic lab tools in a set. Always have these essential items available in your pocket.1 x pair of scissors1 x double spatula1 x pair of forceps, fine points1 x micro spatula, half round
€19,67
Laboratory Flask Holders ZF, stainless steel for insert baskets SONOREX | Type: ZF 10, For: K 10 / K 10 B
Laboratory Flask Holders ZF, stainless steel for insert baskets SONOREX | Type: ZF 10, For: K 10 / K 10 B
Merk: Bandelin electronicBeschikbaar in 2 variantenFor fixing of labortory flasks in insert baskets, precise fitting without additional tools. Compartment sizes can be set individually and varied quickly.Scope of delivery:ZF 10: 5 x 155 mm and 3 x 215 mm laboratory flask holdersZF 28: 9 x 215 mm and 4 x 420 mm laboratory flask holders
€154,00
Laboratory flasks, borosilicate | Nominal capacity: 1000 ml
Laboratory flasks, borosilicate | Nominal capacity: 1000 ml
Merk: Bohlender GmbHBeschikbaar in 2 variantenLaboratory flasks, with screw cap and spout made of PP.
€28,29
Laboratory forceps | Form: grooved, Length mm: 150
Laboratory forceps | Form: grooved, Length mm: 150
Merk: Karl Hammacher GmbHBeschikbaar in 2 variantenWironit steel. Curved.
€27,65
470471472473474475

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    Algemene voorwaarden    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Onze website maakt gebruik van cookies.
Zowel wij en onze derde partij partners maken gebruik van cookies. Sommige zijn strikt noodzakelijk om de site te laten functioneren, maar er bestaan ook optionele cookies.

De noodzakelijke en functionele cookies staan altijd aan. Als je op "alle cookies aanvaarden" klikt accepteer je ook de optionele cookies. Je kan zelf kiezen welke cookies je aan wil zetten via "voorkeuren instellen".

Onze website maakt gebruik van cookies.
Wat zijn cookies? Welke cookies gebruiken we en waarom? Lees meer in ons cookiebeleid

Noodzakelijke cookies

Cookies die onontbeerlijk zijn voor uw bezoek aan de Website en het correct gebruik daarvan

Functionele cookies

Cookies die uw bezoek aan de Website vergemakkelijken en aangenamer maken, onder meer door uw surfervaring te personaliseren.

Performantie cookies

Cookies die informatie verzamelen over uw gebruik van de Website met de bedoeling de inhoud van de Website te verbeteren en aan te passen aan de wensen van de Gebruiker.

Derde partij cookies

Cookies die geplaatst worden door derden die eigen diensten aanbieden via de Website zoals bijvoorbeeld social media, advertenties of videodiensten.