Even geduld

Uw bericht wordt verstuurd

Er is een fout opgetreden

Algemene labobenodigdheden

Analytisch meten en testen

Behandeling van vloeistoffen

Bescherming en veiligheid

Chromatografie

Cleanroom

Destillatie, scheiding, filtratie

Levenswetenschappen

Milieu-, bodem-, water-, voedselanalyse

Monstervoorbereiding

Optische instrumenten en microscopen

Reiniging en sterilisatie

Roeren, schudden, mengen

Vacuümtechnologie, drogen, droge opslag

Verwarmings- en koeltechnologie

464748495051
Pipette controllers, pipetus® standard, standard-filter | Type: pipetus® standard
Pipette controllers, pipetus® standard, standard-filter | Type: pipetus® standard
Merk: Hirschmann Laborgeräte GmbHBeschikbaar in 2 variantenClassic pipette controller, tried and tested for over 20 years. Ideal for work in fume cupboards as separate hand and pump modules (230 Volt). Handle is particularly ergonomic and lightweight. Can be used with 0.1 to 200 ml pipettes. Standard delivery (Ex) or Blow-out functions are available. Pipetting speed can be pre-selected on the pump module. Pipetting is carried out by simply pressing the in or out buttons. The amount of pressure exerted determines the ultimate pipetting speed. Built-in safety valve prevents penetration of liquid into the instrument or the handle. The pipetus®-standard-filter is additionally supplied with an extra large capacity filter mounted on the pump module. pipetus® standard-filter is supplied with: pipetus® standard complete with electric pump, 2 filters and 1 safety valve extra.
€286,00
Pipette filler Pi-pump | For pipettes up to ml: 0.2, Colour: yellow
Pipette filler Pi-pump | For pipettes up to ml: 0.2, Colour: yellow
Merk: Glasfirn GießenBeschikbaar in 2 variantenPipette filler Pi-pump made of acid-proof plastic, suitable for all pipettes. By turning the knurled wheel, a piston is moved and liquids can be sucked up or released from the pipette. This technique allows for safe and precise pipetting by hand. Releasing the liquids precisely, i.e. line by line, is easily possible. Sizes 2, 10 and 25 are additionally equipped with a fast release valve which allows for free release of liquids instantly.
€12,08
Pipette Filler, pipetus® | Type: pipetus®
Pipette Filler, pipetus® | Type: pipetus®
Merk: Hirschmann Laborgeräte GmbHThe pipetus® is ergonomically sophisticated in every detail despite most modern technology, powerful and light-weight. Fits graduated, volumetric and Pasteur pipettes from 0.1 ml to 200 ml. Without reloading it can be operated up to one week. The colour display shows the selected defaults (speed) and the current battery capacityAutomatic inductive charge in the park station guarantees constant readiness Controlled pipetting by a simple push of a button EX/Blow out switch for precise operating Speed key for 5 operating speeds No memory effect by inserted microcontroller Clear colour display with permanent display Optimal meniscus adjustment by sensitive valve technique Standard relief valve against penetration of liquid Ergonomic design for fatigue-free serial pipetting Power supply 100-240 V, with EU, UK, US plugsSupplied with:pipetus®complete with mains operated charging unit and inductive charging stand, color display with battery level indicator, 2 additional round PTFE filters, additional safety valve and wall mount.
€490,00
Pipette Fillers Profiller™ 447 | Type: Profiller™ 447
Pipette Fillers Profiller™ 447 | Type: Profiller™ 447
Merk: SOCOREX ISBA SAElectronic pipette filler which allows longer and fatigue-free pipetting due to comfortable hand adjustment. Shape is ideal for working with glass or plastic pipettes. A powerful, quiet motor and a switch to set both aspiration and dispensing speeds enable maximal working efficiency even with large pipetting volumes.Powerful pump (fills 25 mL in 3 seconds)Comfortable finger triggersLow battery lightNiMH battery rechargeable during useInterchangeable protection membrane filterScope of delivery: Pipette filler Profiller™ 447, power supply, four plug adaptors (EU, US/JP, GB, AUS/NZ), two spare hydrophobic filters (0.45 µm and 0.2 µm), bench and wall stands and instruction manual.
€372,00
Pipette Fillers S1 | Colour: green
Pipette Fillers S1 | Colour: green
Merk: Thermo Elect.LED GmbH (Finn)Beschikbaar in 5 variantenA lightweight, wireless pipette filler that allows longer and fatigue-free pipetting. For use with graduated and volumetric serological pipettes made of glass or plastic. Separate control of aspirating and dispensing speeds allows precise control of pipetting speeds and reduces the risk of overpipetting for smaller pipettes and volumes.Separate switches for aspiration and dispensingLarge backlit LCD display with indication of remaining battery life and speed settings8 speed levelsQuick charge function (fully charged after 3 hours)Individual labelling fieldSuitable for wall mounting or table standWith pipette adapter for the use of 1 ml pipettesScope of delivery: S1 pipette filler, universal charger, table stand, holder for wall mounting, 1 ml pipette tray, operating instructions and warranty card
€560,00
Pipette holders | Type: Pipette holders
Pipette holders | Type: Pipette holders
Merk: BRAND GMBH + CO.KGFor intraEND micropipettes.
€4,40
Pipette Leak Testing Unit (PLT unit) | Type: Pipette Leak Testing Unit
Pipette Leak Testing Unit (PLT unit) | Type: Pipette Leak Testing Unit
Merk: BRAND GMBH + CO.KGImproved process reliability with functional validation of air-displacement pipettes.The most frequent cause of inaccuracy in piston-operated pipettes is leakage. This arises from damage either to the seals, pistons or tip cones. Often not detectable by the naked eye, leaks lead to significant volume errors.The BRAND pipette leak tester (PLT unit) for air displacement pipettes finds even the smallest leaks within seconds.Limit values for the commercially available single- and multichannel pipettes in the volume range 1µl to 10ml are pre-programmed.Testing with and without tips Test results in secondsPatent pendingAccording to monitoring of measuring instruments, air-displacement pipettes must be checked at regular intervals and the results must be compared with the ISO 8655-2 error limits. However, a calibration certificate only reflects the results at the time of testing. The time between these calibrations is crucial, since leaks can occur at any time. Well over 80% of pipettes sent in for repair have leaks and are outside their volume tolerances, even if they don't drip.While the PLT unit cannot replace regular gravimetric testing, daily pipette checks can provide a safeguard during the periods between calibrations. Even the smallest leaks are detected. Process reliability for the pipettes is thus significantly improved.Items supplied:PLT unit (Pipette Leak Testing Unit) including one adapter each for testing air-displacement pipettes with tip (mounted) and without tip, 2 plugs, 3 replacement PE filters for the pipette adapters, universal AC adapter, quality certificate and operating manual.
€1.420,00
Pipette reservoirs, PP | Description: 1-column, Working volume column each ml: 150, Bottom shape: pyramid, 96-well
Pipette reservoirs, PP | Description: 1-column, Working volume column each ml: 150, Bottom shape: pyramid, 96-well
Merk: BRAND GMBH + CO.KGBeschikbaar in 2 variantenThese reagent reservoirs were designed especially for use with automated liquid handling platforms. They can also be used with manual systems. Different partitions, bottom styles and profiles provide broas application flexibility.ANSI/SLAS standard format Compatible with nearly all liquid handling robots and other automated dispensing systemsDifferent types for use with multichannel pipettes and automatic systemsExcellent stability and chemical resistance made from high-quality polypropyleneFree from RNases and DNases, autoclavable (121 °C, 20 min)
€166,95
Pipette rinser system | Type: Pipette soaking jar, Ø mm: 165, Height Insert mm: -
Pipette rinser system | Type: Pipette soaking jar, Ø mm: 165, Height Insert mm: -
Merk: Kartell S.p.A.Beschikbaar in 7 variantenFor easy and gentle cleaning of pipettes according to the suction lifter principle. A complete rinsing system consists of pipette washer, pipette soaking jar and pipette basket, please order separately. Heat resistant up to 105 °C, good chemical resistance.Pipette basket: For holding pipettes up to 600 mm or burettes acc. to Mohr. The basket is equipped with a handle and a height-adjustable ring. The bottom of elastic PE reduces the risk of damage to the pipettes.Pipette soaking jar: For pre-cleaning of the pipettesPipette rinser: For rinsing the pre-cleaned pipettes. The emptying siphon permits constant water exchange. The water inlet should be approx. 2 l/min.
€152,80
Pipette stand for electronic single and multichannel microliter pipettes E1-ClipTip™ | Description: Pipette stand E1-ClipTip™ with power supply
Pipette stand for electronic single and multichannel microliter pipettes E1-ClipTip™ | Description: Pipette stand E1-ClipTip™ with power supply
Merk: Thermo Elect.LED GmbH (Finn)
€276,00
Pipette stand for Finnpipette™ | Description: for 6 pipettes
Pipette stand for Finnpipette™ | Description: for 6 pipettes
Merk: Thermo Elect.LED GmbH (Finn)Beschikbaar in 2 variantenPipette stands, grey, made of two solid supports and an aluminum crossbar for 3 or 6 single-channel pipettes.Can also be used for multi-channel pipettes.
€86,50
Pipette Stand for Microliter Pipette Tacta | Type: Pipette Stand for Microliter Pipette Tacta
Pipette Stand for Microliter Pipette Tacta | Type: Pipette Stand for Microliter Pipette Tacta
Merk: Sartorius Lab Instruments(Bio)
€82,10
464748495051

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    Algemene voorwaarden    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Onze website maakt gebruik van cookies.
Zowel wij en onze derde partij partners maken gebruik van cookies. Sommige zijn strikt noodzakelijk om de site te laten functioneren, maar er bestaan ook optionele cookies.

De noodzakelijke en functionele cookies staan altijd aan. Als je op "alle cookies aanvaarden" klikt accepteer je ook de optionele cookies. Je kan zelf kiezen welke cookies je aan wil zetten via "voorkeuren instellen".

Onze website maakt gebruik van cookies.
Wat zijn cookies? Welke cookies gebruiken we en waarom? Lees meer in ons cookiebeleid

Noodzakelijke cookies

Cookies die onontbeerlijk zijn voor uw bezoek aan de Website en het correct gebruik daarvan

Functionele cookies

Cookies die uw bezoek aan de Website vergemakkelijken en aangenamer maken, onder meer door uw surfervaring te personaliseren.

Performantie cookies

Cookies die informatie verzamelen over uw gebruik van de Website met de bedoeling de inhoud van de Website te verbeteren en aan te passen aan de wensen van de Gebruiker.

Derde partij cookies

Cookies die geplaatst worden door derden die eigen diensten aanbieden via de Website zoals bijvoorbeeld social media, advertenties of videodiensten.