Even geduld

Uw bericht wordt verstuurd

Er is een fout opgetreden

Algemene labobenodigdheden

Analytisch meten en testen

Behandeling van vloeistoffen

Bescherming en veiligheid

Chromatografie

Cleanroom

Destillatie, scheiding, filtratie

Levenswetenschappen

Milieu-, bodem-, water-, voedselanalyse

Monstervoorbereiding

Optische instrumenten en microscopen

Reiniging en sterilisatie

Roeren, schudden, mengen

Vacuümtechnologie, drogen, droge opslag

Verwarmings- en koeltechnologie

123456
Service case for thermohygrometer testo 635 and temperature meter testo 735 | Description: Service case, Dimensions (WxDxH): 454 x 319 x 135 mm, For: testo 635 / 735
Service case for thermohygrometer testo 635 and temperature meter testo 735 | Description: Service case, Dimensions (WxDxH): 454 x 319 x 135 mm, For: testo 635 / 735
Merk: Testo SE & CO KGaAService case for storage and safe transport of meter, probes, and accessories.
€102,00
Sound level meter class I and II | Type: SW 1000, class I
Sound level meter class I and II | Type: SW 1000, class I
Merk: Kern & Sohn GmbHBeschikbaar in 2 variantenFor measurements for workplaces which are outdoors, e.g. at airports, on building sites, in road construction etc. with broad access to spectrum thanks to the highly-accurate 24-Bit A/D converter.Different sound pressure levels can be selected, such as, for example, Laeq, LcPeak, LaF, LaFMax, LaFMin, SD, SEL, EThe optimised analogue frontend switch reduces the ambient noise and increases the linear measuring rangeThree profiles and 14 user-defined measurements can be calculated in parallel with different frequency and time weightingLN statistics and display of the graph showing the progression of timeUser-defined integral interval measurement up to a maximum of 24 hours is possibleFrequency weighting (filter) A, B, C, ZTime interval during measurement: F (fast), S (slow), I (pulse)Freely-definable limits for the output of an optical alarm signalPeak Hold Mode to capture peaksOctavo function for targeted sound analysisTrack function with graphic display of a measurementCalibration mode (with optional calibrator)Trigger mode: Analogue signal to switch the device on or off with 3.5 mm plugAutomatic measurement for timer function is possibleMeasured value recording frequency selectable: 10, 5, 2 HzData transfer using MicroSD (4 GB), RS-232 or USBOption of fitting a column on the rear of the housing, ¼ threadScope of supply: Sound level meter, memory card, hard carrying case
€2.150,00
Sound level meter SU 130, class II | Type: Sound level meter SU 130, class II
Sound level meter SU 130, class II | Type: Sound level meter SU 130, class II
Merk: Kern & Sohn GmbHSound level meter for noise measuring.Delivered in a hard carrying caseMulti measuring functions: Lp: Standard sound level measuring function, Leq: Energy equivalent sound level measuring mode (type A), Ln: Shows the deviation from a pre-defined limit in %Selectable methods of evaluation: A: As sensitive as the human ear, C: Sensitive for noisier environmental, conditions, where there are machines, plant, motors etc., F: For areas where sound intensity does not varyFunction to set limits: Programmable target value for go/no-go test valuesTrack function for continuous recording of variable environmental conditionsPeak Hold Mode to capture peaksInternal memory for measured values, for 30 measurements. Can be displayed on the PCData interface RS-232, included
€120,00
TC-Temperature probes for testo measuring instruments, TC plug type K | Description: Angled surface probe, Sensor type: TC Type K, Temp. range °C: -60 ... 300
TC-Temperature probes for testo measuring instruments, TC plug type K | Description: Angled surface probe, Sensor type: TC Type K, Temp. range °C: -60 ... 300
Merk: Testo SE & CO KGaABeschikbaar in 14 variantenTemperature probes with TC plug type K.
€165,00
Temperature probe for U-value determination | Temp. range °C: -20 ... 70, Sensor type: TE type K
Temperature probe for U-value determination | Temp. range °C: -20 ... 70, Sensor type: TE type K
Merk: Testo SE & CO KGaATemperature probe to determine the U-value with triple sensor technology for measuring the wall temperature. To measure surface temperature, the three wires of the probe are attached to the inner wall using the supplied modelling clay.To calculate the U-value, the outside temperature and room air temperature are required in addition to the surface temperature of the inside wall. With the radio probes (consisting of a radio handle and attachable temperature probe heads), these temperatures can be determined quickly and easily and transmitted to the testo 635.
€240,00
Temperature probe heads for radio handle | Description: Probe head for surface measurement, Temperature sensor: TC type K
Temperature probe heads for radio handle | Description: Probe head for surface measurement, Temperature sensor: TC type K
Merk: Testo SE & CO KGaABeschikbaar in 2 variantenFor wireless temperature measurements. Attachable to radio handle.
€77,00
Temperature/humidity meter testo 610 | Type: testo 610, Dimensions (WxDxH): 46 x 25 x 119 mm, Weight: 90 g
Temperature/humidity meter testo 610 | Type: testo 610, Dimensions (WxDxH): 46 x 25 x 119 mm, Weight: 90 g
Merk: Testo SE & CO KGaAHandy measuring device with built-in NTC temperature sensor, and long-term stable capacitive humidity sensor for precise measurement of temperature and humidity indoors. Ideal for checking the indoor climate.Illuminated, easy-to-read displayCalculation of dew point and wet bulb temperatureHold functionDisplay of min./max. valuesAttachable protective cap, wrist strap, and belt pouch for safe storageScope of supply: Temperature/humidity meter, protective cap, belt pouch, calibration protocol, batteries
€150,00
testo 440 lux kit
testo 440 lux kit
Merk: Testo SE & CO KGaAComplete set for measuring illuminance, consisting of the testo 440 climate measuring device and a lux probe. Suitable for all common light sources, including white and warm light LEDs. Measuring accuracy according to DIN EN 13032-1 and DIN 5032-7. Probe with 1.4 m long cable, so that the measurement is not influenced by your own shadow. Fully configured, ready for use.Easy, intuitive operationNon-slip probe surfaceLarge, illuminated graphic displayMeasuring instrument with magnetic fixation on metallic surfacesMemory for up to 7500 measurement protocolsExport of measurement data via USB interfaceScope of delivery: climate measuring instrument testo 440, 3 batteries type AA, USB cable, lux probe with fixed cable, calibration protocols for measuring instrument and probe, transport case
€651,00
testo Smart Probes Set | Type: testo Smart Probes Set
testo Smart Probes Set | Type: testo Smart Probes Set
Merk: Testo SE & CO KGaAThe testo Smart Probes Set consists of different measuring instruments that can be used for climate measurements. With the free testo Smart App, all measurement data can be logged, progressions graphically displayed and results sent as PDF or Excel file.Measurement of temperature (°C), humidity (% rH), flow (m/s) and pressure (bar, hPa)Quick and easy transmission of the measurement data via Bluetooth® to smartphones or tabletsScope of supply: 2 x Clamp thermometer testo 115i (incl. batteries and calibration protocol), 2 x High pressure meter testo 549i (incl. batteries and calibration protocol), 2 x Thermohygrometer testo 605i (incl. batteries and calibration protocol), 1 x Thermometer testo 915i with air probe (TC Type K) (incl. batteries and calibration protocol), 1 x Infrared thermometer testo 805i (incl. batteries and calibration protocol), 1 x Thermal anemometer testo 405i (incl. batteries and calibration protocol), 1 x Vane anemometer testo 410 i (incl. batteries and calibration protocol), 1 x Differential pressure meter testo 510i (incl. hose kit, adapter, batteries and calibration protocol), testo HVAC softcase
€1.049,00
Thermal anemometer testo 405i | Type: testo 405i
Thermal anemometer testo 405i | Type: testo 405i
Merk: Testo SE & CO KGaAThe Thermal anemometer testo 405i is suitable for measuring volume flow, air velocity and air temperature. Quick and easy transmission of the measurement data to smartphone or tablet via Bluetooth®. With the free testo Smart App, measurement data can be read, mean values determined and results sent as a PDF or Excel file.Extendable telescopic tube (up to 400 mm)Selectable units of measurement: °C, °F, m/s, fmp, m3/h, cfm, l/sScope of supply: Thermal anemometer, extendable telescope, batteries, calibration protocol
€125,00
15%
Thermohygrometer testo 608 | Type: testo 608-H1
Thermohygrometer testo 608 | Type: testo 608-H1
Merk: Testo SE & CO KGaABeschikbaar in 2 variantenContinuous monitoring of indoor climateThe economic thermohygrometer testo 608-H1 measures humidity, temperature and dewpoint continuously. The large display is easy to read even at a distance. With wall mounting and table holder for flexible positioning.The accurate testo 608-H2 alarm hygrometer reliably indicates when humidity and temperature limits have been exceeded, for example in greenhouses, warehouses, cleanrooms, museums, laboratories etc.Continuous display of temperature and humidity or dewpointWith dew point calculation and max/min displayBattery monitoringAdditional features testo 608 H2:LED alarm, warns if limits are exceededHigh accuracy ±2%rH
€93,00
€79,05
Thermohygrometer testo 622 | Type: testo 622
Thermohygrometer testo 622 | Type: testo 622
Merk: Testo SE & CO KGaAIn addition to temperature and humidity, the testo 622 also measures barometric pressure. The large, clear display indicates current readings, as well as the date and time. It thus provides all important values at a glance.
€299,00
123456

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    Algemene voorwaarden    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Onze website maakt gebruik van cookies.
Zowel wij en onze derde partij partners maken gebruik van cookies. Sommige zijn strikt noodzakelijk om de site te laten functioneren, maar er bestaan ook optionele cookies.

De noodzakelijke en functionele cookies staan altijd aan. Als je op "alle cookies aanvaarden" klikt accepteer je ook de optionele cookies. Je kan zelf kiezen welke cookies je aan wil zetten via "voorkeuren instellen".

Onze website maakt gebruik van cookies.
Wat zijn cookies? Welke cookies gebruiken we en waarom? Lees meer in ons cookiebeleid

Noodzakelijke cookies

Cookies die onontbeerlijk zijn voor uw bezoek aan de Website en het correct gebruik daarvan

Functionele cookies

Cookies die uw bezoek aan de Website vergemakkelijken en aangenamer maken, onder meer door uw surfervaring te personaliseren.

Performantie cookies

Cookies die informatie verzamelen over uw gebruik van de Website met de bedoeling de inhoud van de Website te verbeteren en aan te passen aan de wensen van de Gebruiker.

Derde partij cookies

Cookies die geplaatst worden door derden die eigen diensten aanbieden via de Website zoals bijvoorbeeld social media, advertenties of videodiensten.