Even geduld

Uw bericht wordt verstuurd

Er is een fout opgetreden

Microcentrifuge Tube Storage Boxes Nalgene™, Type 5055, PC | Type: 5055, For tubes ml: 1.5, Dimensions (L x W x H) mm: 130 x 130 x 50
Microcentrifuge Tube Storage Boxes Nalgene™, Type 5055, PC | Type: 5055, For tubes ml: 1.5, Dimensions (L x W x H) mm: 130 x 130 x 50
Merk: Thermo Elect.LED GmbH (Nalge)Beschikbaar in 3 variantenSafely store samples using Microcentrifuge Tube Storage Boxes. High-temperature polyurethane foam insert securely holds 64 or 81 microcentrifuge tubes sized 0.2, 0.5 or 1.5 ml.bottom constructed in white and lid in transparent polycarbonatetemperature resistant from -135 to 121 °Cwith grid numbers for reliable identification of individual samples
€19,50
Microplate incubator INC-200D-M | Type: INC-200D-M, Nominal capacity: 20 l, Temperature: RT+ 8 ... 80 °C
Microplate incubator INC-200D-M | Type: INC-200D-M, Nominal capacity: 20 l, Temperature: RT+ 8 ... 80 °C
Merk: Cole-Parmer Ltd. (Stuart)A dedicated microtitration plate incubator, working volume 20 litres. Up to 48 x 96-well plates can be held, evenly distributed onto four pull-out stainless steel shelves, one or two layers deep. Precise, even temperature control is maintained throughout the chamber by forced circulation of preheated air from one side to the other across the plates. When filled with 24 x 96-well plates evenly distributed and at a temperature setting of +37°C, variation of temperature between shelves is maintained to within ±0.5°C and fluctuation to within ±0.5°C. A removable stainless steel tray in the chamber base may be filled with water to increase humidity. The 10mm clear acrylic door opens upwards. For 230V 50Hz single phase supplies, 280W.With BioCote, silver-based, antimicrobial protection.
€2.982,60
Microtube block thermostat BTD | Type: BTD, Dimensions (W x D x H) mm: 210 x 230 x 110, Power W: 200
Microtube block thermostat BTD | Type: BTD, Dimensions (W x D x H) mm: 210 x 230 x 110, Power W: 200
Merk: Grant Instruments Ltd.Grantás block heating system BTD with fixed block is designed for rapid and precise heating of microtubes up to 100ºC.Digital temperature control for optimum precisionHeating block holds combinations of four microtube sizes simultaneously - up to a total of 49 tubes: 24 x 1.5/2.0 ml, 15 x 0.5 ml, 10 x 0.2 mlFlexible tube sizes and rapid heat-up time enables swift change of applicationConvenient integral timer for time-sensitive incubationsSturdy, durable, easy-to-clean plastic construction; compact design with small footprint2-line display for simple and precise setting of temperature/time and for monitoring current status during operation
€783,00
Microtube Storage Boxes, PC | Volume ml: 5.0, Colour: Blue, Dimensions (W x D x H) mm: 133 x 133 x 96
Microtube Storage Boxes, PC | Volume ml: 5.0, Colour: Blue, Dimensions (W x D x H) mm: 133 x 133 x 96
Merk: ISOLAB Laborgeräte GmbHBeschikbaar in 2 variantenManufactured from polycarbonate with high mechanical strength and high temperature resistance between -196 to +121°C. Uniquely designed to carry 81 cryo tubes in 9 x 9 array "Hedgehog" designed tube compartments holds the tube in their position firmly. Unique design with vent and drainage holes guarantees best, efficient air circulation. Forward slope base ensures quick visual orientation. Easily stackable for reducing storage space. Hinged lid with built-in stop allows easy one-handed access to tubes. Clear box lid enables easy identification of box content and protects the tubes from dust, moisture and other environmental effects. Alphanumerical index both on tube rows and the lid enables easy identification of tube positions. Box is supplied together with a disposable forceps, made from ABS, with fine end for easy handling and fast removal of tubes.
€23,75
Microtube Storage Boxes, PP, 50-/100-Well | Colour: natural, Dimensions (L x W x H) mm: 141 x 92 x 56, Array: 50
Microtube Storage Boxes, PP, 50-/100-Well | Colour: natural, Dimensions (L x W x H) mm: 141 x 92 x 56, Array: 50
Merk: Heathrow Scientific LLCBeschikbaar in 3 variantenAutoclavable. Compact storage box has angled front slot for easy access to tubes. Rugged, polypropylene box has durable three-point hinges, snapping clasp for secure closure, moulded grid lines on lid, imprinted coordinates on bottom of base and imprinted and raised coordinates on tube wells. Ideal for sample or case study storage.Holds 1.5 ml to 2.0 ml microtubes. Resist storage temperatures from -80 to 121 °C.
€6,17
Microwave MW 7772 | Type: MW 7772, Nominal capacity: 16.4 l, External dimensions (WxDxH): 510 x 430 x 305 mm
Microwave MW 7772 | Type: MW 7772, Nominal capacity: 16.4 l, External dimensions (WxDxH): 510 x 430 x 305 mm
Merk: Sonepar Deutschland/Microwave with large turntable and 5 power levels for heating and defrosting.Defrosting programme by weight and time35 min. timer with acoustic signalRemovable turntable (Ø 315 mm)Lacquered interiorHighly heat-resistant housing
€183,83
Midi 40 CO2Incubator with small volume | Type: Midi-40, Nominal capacity l: 40, Max. grids: 4
Midi 40 CO2Incubator with small volume | Type: Midi-40, Nominal capacity l: 40, Max. grids: 4
Merk: Thermo Elect.LED GmbH (Kendro)The Thermo Scientific Midi 40 CO2 incubator is designed specifically for cell culture scientists who require a compact culturing workspace to handle small workloads, perform personal use applications, or simply address limited space environments. With its 1.4 cu ft (40L) capacity, the Midi 40 adds a new dimension to the Thermo Scientific portfolio of leading CO2 incubation solutions. It delivers the performance and capabilities of full-sized incubators in a space-saving footprint, ideal for those who wish to avoid shared-use environments that can present potential contamination risk through unnecessary sample handling and repeated door openings. Easy to operate and economical to own, the fully featured Midi 40 offers remarkable value in a small footprint.The Midi 40 includes:Advanced IntrLogic™ II microprocessor: bright digital display and intuitive touchpad for simplified entry of temperature, CO2 and alarm data, with keyed setpoint switch to prevent unauthorised changes to your operating parameters.Stainless steel culture chamber: seamless, non-corrosive and exceptionally easy to clean. The Midi 40 is provided with four removable shelves.Highly efficient direct heating design: provides even heat distribution to all sides of the chamber, for accurate control with uniformity of +/- 0.1°C.Precise and reliable CO2 control: featuring accurate thermal conductivity sensor located directly in the chamber, ensuring responsive control and long service life.Removable water reservoir: generates relative humidity values up to 95% with rapid recovery rates that promote optimal cell growth.Heated inner glass door: provides sample security while preventing unwanted condensation.Convenient data communication: RS-485 signal output is standard, in addition to audible and visual alarm functions to ensure proper operations.
€5.850,00
Mini coolers
Mini coolers
Merk: BRAND GMBH + CO.KGBeschikbaar in 3 variantenMini coolers are designed to protect a wide range of solutions (enzymes, DNA, RNA, cell suspensions) by helping to maintain freezer temperatures on the lab bench. Durable polycarbonate filled with non-toxic gel. Mini coolers hold twelve 0.5 ml to 2.0 ml tubes.
€111,85
Mini cooling incubator LLG-uniINCU 20 cool | Type: LLG-uniINCU 20/C, Nominal capacity: 22 l, External dimensions (WxDxH): 340 x 410 x 480 mm
Mini cooling incubator LLG-uniINCU 20 cool | Type: LLG-uniINCU 20/C, Nominal capacity: 22 l, External dimensions (WxDxH): 340 x 410 x 480 mm
Merk: LLG LabwareBeschikbaar in 2 variantenDigital mini incubator with cooling and heating function for cultivation of biological samples in small-volume vessels. With internal power outlet for positioning small shakers, mixers, or other devices in the inner chamber. Due to its small footprint, the LLG-uniINCU 20 cool is ideal for small laboratories and educational institutions.Good temperature stability of the set temperature (up to 15 °C below ambient temperature) in the inner chamber of the cooling incubatorLarge inner chamber with 22 l capacityFast heating and homogeneous temperatureWith built-in calibration function of up to ±5 °CScope of delivery: incubator, 1 x shelf, 1 x power supply unit, 1 x power cable, operating instructions
€993,00
Mini Incubator, with Mini LabRoller™ and rotisseries | Type: I5110A-MLR, Nominal capacity: 9200 ml, Temperature: RT+5 ... 70 °C
Mini Incubator, with Mini LabRoller™ and rotisseries | Type: I5110A-MLR, Nominal capacity: 9200 ml, Temperature: RT+5 ... 70 °C
Merk: Corning BVThe incubator is supplied with Mini LabRoller™ and rotisseries for 1.5 ml, 15 ml, and 50 ml tubes.
€778,10
Mini Incubator, with shelf | Type: I5110A, Nominal capacity: 9200 ml, Temperature: RT+5 ... 70 °C
Mini Incubator, with shelf | Type: I5110A, Nominal capacity: 9200 ml, Temperature: RT+5 ... 70 °C
Merk: Corning BVThe incubator is supplied with one shelf.
€419,40
Mini-Freezer KBT 08-51, up to -50 °C | Type: Mini-Freezer KBT 08-51 with ST100 control and convection
Mini-Freezer KBT 08-51, up to -50 °C | Type: Mini-Freezer KBT 08-51 with ST100 control and convection
Merk: Fryka-Kältetechnik GmbHBeschikbaar in 3 variantenThe mini-freezers are the ideal solution for chilling material samples directly at the workplace.Electronic temperature control with LED display, 2 controls availableRefrigeration unit: low noise, air-cooled, low maintenancewith natural refrigerant R-1270Housing parts made of high quality stainless steelInsulated stainless steel hinges and hinged lid with magnetic sealRam protection ring going over and underST71 controlElectronic temperature control with LED displayOptical and acoustic alarmST100 controlMicroprocessor-controlled, with membrane keyboard and easy-to-read LED displayProtection against unintentional activationAlarm system that is separate from the mains, with battery capacity for approx. 72 hoursDisplay of the maximum temperature reached in the interior area during the faultRS485 interface, potential-free contact for connection to an external alarm system and 100 mV/K outputOptical and acoustic alarm
€4.080,00

Onze website maakt gebruik van cookies.
Zowel wij en onze derde partij partners maken gebruik van cookies. Sommige zijn strikt noodzakelijk om de site te laten functioneren, maar er bestaan ook optionele cookies.

De noodzakelijke en functionele cookies staan altijd aan. Als je op "alle cookies aanvaarden" klikt accepteer je ook de optionele cookies. Je kan zelf kiezen welke cookies je aan wil zetten via "voorkeuren instellen".

Onze website maakt gebruik van cookies.
Wat zijn cookies? Welke cookies gebruiken we en waarom? Lees meer in ons cookiebeleid

Noodzakelijke cookies

Cookies die onontbeerlijk zijn voor uw bezoek aan de Website en het correct gebruik daarvan

Functionele cookies

Cookies die uw bezoek aan de Website vergemakkelijken en aangenamer maken, onder meer door uw surfervaring te personaliseren.

Performantie cookies

Cookies die informatie verzamelen over uw gebruik van de Website met de bedoeling de inhoud van de Website te verbeteren en aan te passen aan de wensen van de Gebruiker.

Derde partij cookies

Cookies die geplaatst worden door derden die eigen diensten aanbieden via de Website zoals bijvoorbeeld social media, advertenties of videodiensten.