Even geduld

Uw bericht wordt verstuurd

Er is een fout opgetreden

Labels Tough-Tags® | Dimensions (W x D) mm: 24 x 13, Colour: Red, For vessels: 0.5ml tubes
Labels Tough-Tags® | Dimensions (W x D) mm: 24 x 13, Colour: Red, For vessels: 0.5ml tubes
Merk: Heathrow Scientific DBTBeschikbaar in 16 variantenTemperature resistant from -40°C to 121°C. Tough-Tags resist boiling water baths, autoclaving and moderate freezer temperatures. Chemically inert labels resist most organic solvents and caustic agents. They adhere to most plastics, glass and metals without cracking, peeling and degrading. Tubes are pre-cut, peel-off labels which accept many marking instruments. They are perfectly sized to fit microcentrifuge tubes and other containers in the laboratory. Tubes labeled with Tough-Tags® easily slide in and out of centrifuge rotors without binding.
€70,02
Labels | Dimensions (W x D) mm: 33 x 13, Colour: Yellow, blue, green, red, orange, white, For vessels: 1.5/2.0 ml Tubes
Labels | Dimensions (W x D) mm: 33 x 13, Colour: Yellow, blue, green, red, orange, white, For vessels: 1.5/2.0 ml Tubes
Merk: ISOLAB Laborgeräte GmbHBeschikbaar in 5 variantenManufactured from polyfiber grade flexible paper with acrylic resin adhesive back. This unique combination expands and retracts together with temperature fluctuations and alwaysguarantees a strong adhesive bond. Chemically inert, resists to water, moisture and most organic solvents and caustic agents. Can be used between -40 to 121 °C temperature range. Also withstands steam autoclaving cycle and gamma irradiation. Adheres to any clean surface including PTFE coated surfaces without cracking, peeling and degrading. Peels off without leaving any sticky residue. Recommended to be used on flat or round surfaces with different diameters. Supplied as 1000 label rolls packed in a dispenser box for practical use.
€220,70
Labels, writing | Width mm: 38
Labels, writing | Width mm: 38
Merk: Bel-Art ProductsBeschikbaar in 3 variantenWhite. Adhere to almost all surfaces. Ideal when used in conjunction with label protection adhesive tape 9.040 425 to 450.
€56,80
Laboratory Bottle system DURAN® YOUTILITY | Nominal capacity: 1000 ml, Ø: 93 mm
Laboratory Bottle system DURAN® YOUTILITY | Nominal capacity: 1000 ml, Ø: 93 mm
Merk: DWK Life Sciences GmbH (Duran)Beschikbaar in 4 variantenSpecially shaped gripping zones on both sides of the bottle for easier and safer handlingWith the new YOUTILITY bottle thread opening or closing the bottle is significantly faster. The thread is fully compatible with DIN GL 45 closures and other accessoriesThe slimmer YOUTILITY bottle shape allows more optimal use of limited space in autoclaves and laboratory refrigeratorsA pre-defined labelling area is compatible with the dedicated DURAN® self-adhesive YOUTILITY bottle labelsNominal volume is shown at the top of the easy-to-read graduation scale for fast determination of the volumesGlass bottle body is moulded from the tried and tested DURAN® borosilicate 3.3 Type 1 neutral glass. DURAN® glass offers very good chemical resistance and high temperature resistanceThe YOUTILITY bottle has an integrated Retrace Code to allow full product traceability. The lot specific certificate of conformance is available at: www.duran-group.comEach DURAN® YOUTILITY bottle is supplied as a complete system, with a pouring ring (cyan polypropylene) and a GL 45 cap (cyan polypropylene)
€71,52
Laboratory bottle system DURAN® YOUTILITY, amber glass | Nominal capacity: 500 ml, Ø: 78 mm
Laboratory bottle system DURAN® YOUTILITY, amber glass | Nominal capacity: 500 ml, Ø: 78 mm
Merk: DWK Life Sciences GmbH (Duran)Beschikbaar in 4 variantenSpecially shaped gripping zones on both sides of the bottle for easier and safer handlingWith the new YOUTILITY bottle thread opening or closing the bottle is significantly faster. The thread is fully compatible with DIN GL 45 closures and other accessoriesThe slimmer YOUTILITY bottle shape allows more optimal use of limited space in autoclaves and laboratory refrigeratorsA pre-defined labelling area is compatible with the dedicated DURAN® self-adhesive YOUTILITY bottle labelsNominal volume is shown at the top of the easy-to-read graduation scale for fast determination of the volumesGlass bottle body is moulded from the tried and tested DURAN® borosilicate 3.3 Type 1 neutral glass. DURAN® glass offers very good chemical resistance and high temperature resistanceThe YOUTILITY bottle has an integrated Retrace Code to allow full product traceability. The lot specific certificate of conformance is available at: www.duran-group.comThe amber colour meets the requirements of the USP <660> and Eur. Ph. requirements for UV light protectionEach DURAN® YOUTILITY bottle is supplied as a complete system, with a pouring ring (cyan polypropylene) and a GL 45 cap (cyan polypropylene)
€212,84
Laboratory bottle with tamper-proof closure, PET sterile | Nominal capacity: 500 ml
Laboratory bottle with tamper-proof closure, PET sterile | Nominal capacity: 500 ml
Merk: Bürkle GmbHBeschikbaar in 8 variantenSterile laboratory bottle for use in laboratories and chemical handling areas. Good product presentation due to crystal-clear PET. Space-saving and absolutely leakproof. Ideal for storing and packing liquids.Sterile SAL 10-3 (according to ISO 11137)With tamper-proof closureWith moulded-in raised graduation
€3,16
Laboratory bottle, DURAN® amber, with screw cap and pouring ring made of PP | Nominal capacity: 150 ml, Ø: 62 mm
Laboratory bottle, DURAN® amber, with screw cap and pouring ring made of PP | Nominal capacity: 150 ml, Ø: 62 mm
Merk: DWK Life Sciences GmbH (Duran)Beschikbaar in 13 variantenFor the storage and transport of photosensitive substances. With easy-to-read graduation and large labelling field for easy identification. UV protection up to approx. 500 nm wavelength. 10 ml and 25 ml with specially shaped glass rim for better pouring, thus an additional pouring ring made of plastic is not necessary.ISO 4796-1USP standardRetrace codeAutoclavable
€33,78
Laboratory bottles Premium, DURAN®, with retrace code | Nominal capacity: 500 ml, Ø: 86 mm
Laboratory bottles Premium, DURAN®, with retrace code | Nominal capacity: 500 ml, Ø: 86 mm
Merk: DWK Life Sciences GmbH (Duran)Beschikbaar in 4 variantenDURAN®. ISO 4796-1, DIN ISO 718. Premium laboratory bottle with DIN thread. Highly leak-tight using Premium screw cap. Working temperature from -196 °C up to 200 °C. With PTFE coated silicone seal and pouring ring. With additional reverse scale, accuracy ±5%. Thermal shock resistance of 160K (tested by the German TÜV and with GS mark). Bottle and screw cap in accordance to USP/EP guidelines (Glass Type I / Neutral glass, screw cap raw material USP Class VI, seal FDA). Screw cap material is similar to PFA and highly resistant against chemicals. The material is free from colourants and therefore no leaching takes place. DMF available upon request. Premium bottle and screw cap fulfil highest requirements of the pharmaceutical, chemical and food industry. With Retrace code (Batch identification). Certificate available via the Internet (available for cap and bottle). Autoclavable.
€29,52
Laboratory bottles Premium, DURAN®, without cap | Nominal capacity: 100 ml, Ø: 56 mm
Laboratory bottles Premium, DURAN®, without cap | Nominal capacity: 100 ml, Ø: 56 mm
Merk: DWK Life Sciences GmbH (Duran)Laboratory bottles without pouring ring and without cap.
€11,42
Laboratory bottles Protect DURAN®, with retrace code | Nominal capacity: 750 ml, Ø: 95 mm
Laboratory bottles Protect DURAN®, with retrace code | Nominal capacity: 750 ml, Ø: 95 mm
Merk: DWK Life Sciences GmbH (Duran)Beschikbaar in 15 variantenHighly transparent. The coating provides scratch, leak and splinter protection (from 10000 ml only with scratch protection) and is ideally suited to both the transport and storage of hazardous media or valuable samples. Service temperature limit of the PU plastic coating: -30 °C to 135 °C. 10 ml and 25 ml bottles with specially shaped glass edge for improved pouring.GraduatedUV protection up to approx. 380 nmDIN threadDIN ISO 4796-1Suitable for microwavingUSP compliantAutoclavable
€30,70
Laboratory bottles Protect DURAN®, with retrace code, with screw cap | Nominal capacity: 1000 ml, Ø: 101 mm
Laboratory bottles Protect DURAN®, with retrace code, with screw cap | Nominal capacity: 1000 ml, Ø: 101 mm
Merk: DWK Life Sciences GmbH (Duran)Beschikbaar in 9 variantenHighly transparent. The coating provides scratch, leak and splinter protection and is ideally suited to both the transport and storage of hazardous media or valuable samples. Service temperature limit of the PU plastic coating: -30 °C to 135 °C.With screw cap and pouring ringGraduatedUV protection up to approx. 380 nmDIN threadDIN ISO 4796-1Suitable for microwavingUSP compliantAutoclavable
€39,08
Laboratory bottles protect+ DURAN®, with retrace code | Nominal capacity: 100 ml, Ø: 56 mm
Laboratory bottles protect+ DURAN®, with retrace code | Nominal capacity: 100 ml, Ø: 56 mm
Merk: DWK Life Sciences GmbH (Duran)Beschikbaar in 9 variantenFor safe storage and shipping of bulk, high-potency active pharmaceutical ingredients (HPAPIs) powders. The coating provides scratch, leak and splinter protection (from 3500 ml only with scratch protection). Screw caps and pouring rings must be ordered separately.Coating made of polyamidWith dust capGraduatedHigh chemical resistanceUV protection
€23,26

Onze website maakt gebruik van cookies.
Zowel wij en onze derde partij partners maken gebruik van cookies. Sommige zijn strikt noodzakelijk om de site te laten functioneren, maar er bestaan ook optionele cookies.

De noodzakelijke en functionele cookies staan altijd aan. Als je op "alle cookies aanvaarden" klikt accepteer je ook de optionele cookies. Je kan zelf kiezen welke cookies je aan wil zetten via "voorkeuren instellen".

Onze website maakt gebruik van cookies.
Wat zijn cookies? Welke cookies gebruiken we en waarom? Lees meer in ons cookiebeleid

Noodzakelijke cookies

Cookies die onontbeerlijk zijn voor uw bezoek aan de Website en het correct gebruik daarvan

Functionele cookies

Cookies die uw bezoek aan de Website vergemakkelijken en aangenamer maken, onder meer door uw surfervaring te personaliseren.

Performantie cookies

Cookies die informatie verzamelen over uw gebruik van de Website met de bedoeling de inhoud van de Website te verbeteren en aan te passen aan de wensen van de Gebruiker.

Derde partij cookies

Cookies die geplaatst worden door derden die eigen diensten aanbieden via de Website zoals bijvoorbeeld social media, advertenties of videodiensten.