Even geduld

Uw bericht wordt verstuurd

Er is een fout opgetreden

Algemene labobenodigdheden

Analytisch meten en testen

Behandeling van vloeistoffen

Bescherming en veiligheid

Chromatografie

Cleanroom

Destillatie, scheiding, filtratie

Levenswetenschappen

Milieu-, bodem-, water-, voedselanalyse

Monstervoorbereiding

Optische instrumenten en microscopen

Reiniging en sterilisatie

Roeren, schudden, mengen

Vacuümtechnologie, drogen, droge opslag

Verwarmings- en koeltechnologie

Peter Huber Kältemaschinenbau
5678910
Circulation cooler Unichiller P025-H OLÉ -10...+100°C, 230 V / 50 Hz
Circulation cooler Unichiller P025-H OLÉ -10...+100°C, 230 V / 50 Hz
€11.050,00
Circulation Heat Exchanger HTS | Type: HTS 1, Working Temp. range °C: 5 ... 80, Pump max. l/min / bar: 8 / 0.2
Circulation Heat Exchanger HTS | Type: HTS 1, Working Temp. range °C: 5 ... 80, Pump max. l/min / bar: 8 / 0.2
Merk: Peter Huber KältemaschinenbauBeschikbaar in 4 variantenHeat exchanger systems with circulation pump for connection to cooling water on the primary side. The devices provide a cooling circuit with stable pressure/ ow and adjustable operating temperature. The cooling capacity is generated using a plate heat exchanger via the cooling water. Since there is no active cooling machine, the devices operate in a quiet and energy-saving manner and are a cost-effective alternative to conventional chillers e.g. for the temperature control of Peltier elements, bioreactors, etc.The model HTS 1 contains the heat exchanger system, however it does not have any temperature control. The device is therefore suited for applications with low requirements for control accuracy.Effcient circulation pumpTemperature stability ±0.1 KRS232 interfacePt100 external sensor connectionLow cooling water usageApplication protection with cooling stage separation
€1.500,00
Circulation Heat Exchanger HTS | Type: HTS 3, Working Temp. range °C: 3 ... 95, Pump max. l/min / bar: 33 / 0.7
Circulation Heat Exchanger HTS | Type: HTS 3, Working Temp. range °C: 3 ... 95, Pump max. l/min / bar: 33 / 0.7
Merk: Peter Huber KältemaschinenbauBeschikbaar in 4 variantenHeat exchanger systems with circulation pump for connection to cooling water on the primary side. The devices provide a cooling circuit with stable pressure/ ow and adjustable operating temperature. The cooling capacity is generated using a plate heat exchanger via the cooling water. Since there is no active cooling machine, the devices operate in a quiet and energy-saving manner and are a cost-effective alternative to conventional chillers e.g. for the temperature control of Peltier elements, bioreactors, etc.The model HTS 1 contains the heat exchanger system, however it does not have any temperature control. The device is therefore suited for applications with low requirements for control accuracy.Effcient circulation pumpTemperature stability ±0.1 KRS232 interfacePt100 external sensor connectionLow cooling water usageApplication protection with cooling stage separation
€5.790,00
Circulation Heat Exchanger HTS | Type: HTS 5, Working Temp. range °C: 3 ... 95, Pump max. l/min / bar: 25 / 2.5
Circulation Heat Exchanger HTS | Type: HTS 5, Working Temp. range °C: 3 ... 95, Pump max. l/min / bar: 25 / 2.5
Merk: Peter Huber KältemaschinenbauBeschikbaar in 4 variantenHeat exchanger systems with circulation pump for connection to cooling water on the primary side. The devices provide a cooling circuit with stable pressure/ ow and adjustable operating temperature. The cooling capacity is generated using a plate heat exchanger via the cooling water. Since there is no active cooling machine, the devices operate in a quiet and energy-saving manner and are a cost-effective alternative to conventional chillers e.g. for the temperature control of Peltier elements, bioreactors, etc.The model HTS 1 contains the heat exchanger system, however it does not have any temperature control. The device is therefore suited for applications with low requirements for control accuracy.Effcient circulation pumpTemperature stability ±0.1 KRS232 interfacePt100 external sensor connectionLow cooling water usageApplication protection with cooling stage separation
€6.970,00
Circulation Heat Exchanger HTS | Type: HTS 6, Working Temp. range °C: 3 ... 95, Pump max. l/min / bar: 25 / 2.5
Circulation Heat Exchanger HTS | Type: HTS 6, Working Temp. range °C: 3 ... 95, Pump max. l/min / bar: 25 / 2.5
Merk: Peter Huber KältemaschinenbauBeschikbaar in 4 variantenHeat exchanger systems with circulation pump for connection to cooling water on the primary side. The devices provide a cooling circuit with stable pressure/ ow and adjustable operating temperature. The cooling capacity is generated using a plate heat exchanger via the cooling water. Since there is no active cooling machine, the devices operate in a quiet and energy-saving manner and are a cost-effective alternative to conventional chillers e.g. for the temperature control of Peltier elements, bioreactors, etc.The model HTS 1 contains the heat exchanger system, however it does not have any temperature control. The device is therefore suited for applications with low requirements for control accuracy.Effcient circulation pumpTemperature stability ±0.1 KRS232 interfacePt100 external sensor connectionLow cooling water usageApplication protection with cooling stage separation
€8.280,00
Circulaton heating unit HB45 with controller Pilot ONE, 45...250°C, 400V 3-N 50 Hz
Circulaton heating unit HB45 with controller Pilot ONE, 45...250°C, 400V 3-N 50 Hz
€8.040,00
Cold trap CT50 Single OLÉ | Type: CT50 Single OLÉ
Cold trap CT50 Single OLÉ | Type: CT50 Single OLÉ
Merk: Peter Huber KältemaschinenbauThe cold trap with air-cooled refrigerating unit has been specially developed to offer highly efficient solvent recovery in laboratory conditions. It can be connected to rotary evaporators or any other application requiring low temperatures for solvent recovery.Direct, rapid coolingBright, large OLED displaySimple operation with menu navigationSimultaneous display of set point, internal temperature, Tmin and TmaxUSB and RS232 interfacesAutostart function for power failureNatural refrigerant R290 Scope of supply: Cold trap CT50 Single OLÉ, drip tray
€5.610,00
Com.G@te holder for Unistat floor-mounted appliance
Com.G@te holder for Unistat floor-mounted appliance
€150,00
Com.G@te holder for Unistat tabletop unit
Com.G@te holder for Unistat tabletop unit
€150,00
ComBox internal Com.G@te for Petite Fleur, Grande Fleur,
ComBox internal Com.G@te for Petite Fleur, Grande Fleur,
€670,00
ComG@te Unistate, CC, extern
ComG@te Unistate, CC, extern
€670,00
Compact refrigerated circulators - Ministat® | Type: Ministat® 125, Bath capacity L: 2.75/1.3*, Dimensions (W x D x H) mm: 225 x 370 x 429
Compact refrigerated circulators - Ministat® | Type: Ministat® 125, Bath capacity L: 2.75/1.3*, Dimensions (W x D x H) mm: 225 x 370 x 429
Merk: Peter Huber KältemaschinenbauBeschikbaar in 6 variantenExceptionally compact and powerful, Ministats have been the smallest cooling circulators in the world since 1976. Their compact form allows them to be placed in small spaces, e.g. in a laboratory extraction hood. Compliance with DIN 12876, class 3 allows them to be used unsupervised in continual operation. The maximum ambient temperature is 40 °C.The powerful variable speed pressure/suction pump can thermoregulate objects in the bath or external applications. The maximum pressure can be controlled using an optional pressure sensor - VPC (Variable Pressure Control) - which protects delicate glassware. The small volume and high power of the Ministats means exceptionally rapid heating and cooling rates are achieved. Optional displacement inserts reduce the bath volume by approximately 50 % amplifying this effect and reducing moisture absorption in the thermal fluid. All models have Active Cooling Control for cooling power control at the maximum working temperature and an automatic cooling power regulation for energy saving operation and reduced heat dissipation into the lab.The bath opening is large enough to allow small objects to be thermoregulated within. All parts in contact with the thermal fluid are made of stainless steel or Polycarbonate.Ministats have the Pilot ONE with Plug & Play technology (proven since 1980). In the event of service the controller can be simply swapped. Using a data cable the Ministat can be remotely controlled. The Pilot ONE has a state of the art microprocessor controller and a high precision temperature measurement system for exact and reproducible temperature control. The functionality and TFT-display are supported by Easy Control.Typical applications for the smallest cooling circulator in the world are external closed systems e.g. photometer, refractometer and viscosimeter.
€5.990,00
5678910

Copyright © 2024 - Achrom nv - BE 0445.025.508    |    Algemene voorwaarden    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Onze website maakt gebruik van cookies.
Zowel wij en onze derde partij partners maken gebruik van cookies. Sommige zijn strikt noodzakelijk om de site te laten functioneren, maar er bestaan ook optionele cookies.

De noodzakelijke en functionele cookies staan altijd aan. Als je op "alle cookies aanvaarden" klikt accepteer je ook de optionele cookies. Je kan zelf kiezen welke cookies je aan wil zetten via "voorkeuren instellen".

Onze website maakt gebruik van cookies.
Wat zijn cookies? Welke cookies gebruiken we en waarom? Lees meer in ons cookiebeleid

Noodzakelijke cookies

Cookies die onontbeerlijk zijn voor uw bezoek aan de Website en het correct gebruik daarvan

Functionele cookies

Cookies die uw bezoek aan de Website vergemakkelijken en aangenamer maken, onder meer door uw surfervaring te personaliseren.

Performantie cookies

Cookies die informatie verzamelen over uw gebruik van de Website met de bedoeling de inhoud van de Website te verbeteren en aan te passen aan de wensen van de Gebruiker.

Derde partij cookies

Cookies die geplaatst worden door derden die eigen diensten aanbieden via de Website zoals bijvoorbeeld social media, advertenties of videodiensten.