Even geduld

Uw bericht wordt verstuurd

Er is een fout opgetreden

Algemene labobenodigdheden

Analytisch meten en testen

Behandeling van vloeistoffen

Bescherming en veiligheid

Chromatografie

Cleanroom

Destillatie, scheiding, filtratie

Levenswetenschappen

Milieu-, bodem-, water-, voedselanalyse

Monstervoorbereiding

Optische instrumenten en microscopen

Reiniging en sterilisatie

Roeren, schudden, mengen

Vacuümtechnologie, drogen, droge opslag

Verwarmings- en koeltechnologie

5678910
Chamber furnaces | Type: N 41/H/B500, Temp. max. °C: 1280, Capacity litres: 40
Chamber furnaces | Type: N 41/H/B500, Temp. max. °C: 1280, Capacity litres: 40
Merk: Nabertherm GmbHBeschikbaar in 7 variantenThe chamber furnaces are suitable for Annealing, Hardening and Brazing. The furnaces can be extended with a variety of accessories, like annealing boxes for operation under protective gas, roller guides, or a cooling station with a quench tank. Even high-performance applications like the annealing of titanium can be implemented without the use of expensive and complicated annealing systems.Robust insulation with light refractory bricksDeep furnace chamber with three-sides heating: from both side walls and bottomLow energy consumption due to multi-layer insulationBase frame includedN 7/H - N 17/HR designed as table-top modelParallel guided downward swinging door (user protected from heat radiation)NTLog Basic for Nabertherm controller: recording of process data with USB-flash driveEquipped with the B 500 programmable controller (with touch panel, 5 programmes with 4 segments each), optionally available with the C 540 controller
€8.130,00
Changeable blocks for CH3-150 Combitherm-2 | For tubes: 29 mm, No. of wells: 5, Depth mm: 40
Changeable blocks for CH3-150 Combitherm-2 | For tubes: 29 mm, No. of wells: 5, Depth mm: 40
Merk: Grant Instruments Ltd.Beschikbaar in 7 varianten
€195,00
Changeable blocks for Thermo Scientific™ Dry Baths / Block Heaters
Changeable blocks for Thermo Scientific™ Dry Baths / Block Heaters
Merk: Thermo Elect.LED GmbH (Kendro)Beschikbaar in 10 varianten
€93,50
Charging rack for ashing furnaces | Description: Charging rack with handle for LV / LVT 15/11
Charging rack for ashing furnaces | Description: Charging rack with handle for LV / LVT 15/11
Merk: Nabertherm GmbHBeschikbaar in 2 variantenCharging rack to load the furnace in different levels, including holders to insert and remove the trays.
€710,00
Cimarec™+ Hotplate | Type: HP88854105, Load max. kg: 6.8, Dimensions (W x D x H) mm: 130 x 259 x 98
Cimarec™+ Hotplate | Type: HP88854105, Load max. kg: 6.8, Dimensions (W x D x H) mm: 130 x 259 x 98
Merk: Thermo Elect.LED GmbH (Kendro)Beschikbaar in 3 varianten
€275,00
Clamp for flasks | For: 500 ml flask, For model: WTB15, WTB24, WTB35, WTB50
Clamp for flasks | For: 500 ml flask, For model: WTB15, WTB24, WTB35, WTB50
Merk: Memmert GmbH + Co. KGBeschikbaar in 4 varianten
€32,00
Clamps for Erlenmeyer flasks for Shaking water baths Hydro | For flasks ml: 500
Clamps for Erlenmeyer flasks for Shaking water baths Hydro | For flasks ml: 500
Merk: Lauda Dr.R.Wobser GmbH & Co.KGBeschikbaar in 8 variantenClamps to be placed on the shaking tray.
€29,60
Clamps for shaking incubators MaxQ/Solaris™ and orbital shakers Solaris™
Clamps for shaking incubators MaxQ/Solaris™ and orbital shakers Solaris™
Merk: Thermo Elect.LED GmbH (Kendro)Beschikbaar in 14 varianten
€45,80
Climate Chambers ICH | Type: ICH260C, Capacity l: 256, Internal dimensions (W x D x H) mm: 640 x 500* x 800
Climate Chambers ICH | Type: ICH260C, Capacity l: 256, Internal dimensions (W x D x H) mm: 640 x 500* x 800
Merk: Memmert GmbH + Co. KGBeschikbaar in 6 variantenThe climate chamber generation with the unique ControlCOCKPIT for a quick and intuitive operation. Unparalleled temperature and humidity homogeneity for long-term stable ambient conditions. Specially designed for testing pharmaceutical products according to ICH, Q1A and Q1B, option 2, and similar global standards for stability tests of cosmetics and food.Standard equipment :PID microprocessor control with integrated auto-diagnostic systemInterior stainless steel 1.4301 (ASTM 304), deep-drawnStructured stainless steel housing, rear of zinc-plated steelHigh-Operation and adjustment of all parameters directly at the ControlCOCKPIT temperature connectors on the rear of the appliance for single-phase power connection according to country specific systems and IEC standardsInternal data logger with a storage capacity of at least 10 yearsGerman, English, French, Spanish language settings available on the ControlCOCKPITDigital backwards counter with target time setting adjustable between 1 minute and 99 daysThe SetpointWAIT function guarantees that the process time does not start until the set temperature is reached at all measuring points - optional for temperature values recorded by the freely positionable Pt100 sensors inside the chamberAdjustment of three calibration values for temperature and additional appliance specific parameters directly at the ControlCOCKPIT, for example relative humidityMoisture tight standard entry port, at the back, 40 mm inner diameter, can be closed by silicone stopperTwinDISPLAY: ControlCOCKPIT with two TFT colour displaysAvailable parameters on the ControlCOCKPIT: Temperature (Celsius or Fahrenheit), programme time, relative humidity, time zones, summertime/wintertimeTwo Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an errorAtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB portControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID functionDisplaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online loggingMultiple overtemperature protection: Electronic temperature monitoring TWW/TWB (protection class 3.3 or 2 and mechanical temperature limiter TB (protection class 1) acc. to DIN 12880, AutoSAFETY automatically adjusts to the set value within a freely adjustable tolerance range. Setting individual MIN / MAX values for over/undertemperature alarmClimate chamber variants:ICH climate chamberICH L climate chamber with lightICH C climate chamber with CO2 control
€18.828,00
Climate Chambers ICHeco | Type: ICH260Leco, Nominal capacity l: 256, Max. grids: 9
Climate Chambers ICHeco | Type: ICH260Leco, Nominal capacity l: 256, Max. grids: 9
Merk: Memmert GmbH + Co. KGBeschikbaar in 6 variantenClimate-friendly and powerful: the ICHeco climate chamber for the stability testing of pharmaceuticals, cosmetics or food works with environmentally-friendly CO2 (R744) as refrigerant. No icing, no drying out of samples, no dehumidification of the working chamber. Compared to appliances with refrigerant R134a, it scores with faster cooling-down times. In the ICHeco L climate chamber, stability tests in accordance with ICH guidelines Q1B, option 2, can be performed, thanks to an illumination unit. Fluorescent lights with cold white light (daylight: light colour 865, 6,500 K) and UV radiation in the spectral range of 320 - 400 nm. Daylight and UV light comply with standard illuminant D65.Model variant TwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.comDifferent variants of ICHeco:ICHeco with humidity controlICHeco L with humidity control and light
€18.900,00
Climatic Test Chamber CTC256/Temperature Test chamber TTC256 | Type: TTC256, Capacity l: 256, Shelf support ribs/shelves: 6/1
Climatic Test Chamber CTC256/Temperature Test chamber TTC256 | Type: TTC256, Capacity l: 256, Shelf support ribs/shelves: 6/1
Merk: Memmert GmbH + Co. KGBeschikbaar in 2 variantenSimulate the perfect atmosphere for climate and temperature tests, specifically in accordance with DIN EN 60068-2-1, 2-2 and 2-3. Provide unlimited flexibility for controlled material and function tests as well as ageing tests.Standard equipmentVentilation and Control: high-performance air fan in working chamberdepending on operation status automatically variable fan speed with manual adjustment from 10% to 100%adaptive, fuzzy-supported multifunctional digital microprocessor PID-controllerautodiagnostic system with fault indication on temperature and humidity control2 x Class A, 4-wire circuit, Pt100 sensors, mutually monitoring and maintaining performance at the same temperature valuedigital 7-day-programme-timer with real time clock, precise minute settingintegral timer for heating profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hoursdigital display (LED) of all set parameters, such as temperature, weekdays, time, humidity and set-up values - language to be chosen in setupdigital display of set values (resolution: 0.1°C below 99.9°C, 0.5°C above 100°C) and actual values (resolution: 0.1°C) of temperature (LED)long-term documenting (ring store) of all relevant data, GLP-conforming as data logger - 1024 kBprogramme stored on power failureparallel printer interface (incl. real-time clock with date function) for all PCL3-compatible ink-jet printers for GLP-conforming documentationUSB interface including Memmert "Celsius" software for programming and documentationchip card control incl. one MEMoryCard XL with 32 kB (up to 40 ramps)incl. works calibration certificate for -20°C and +160°CHeating concept: high-performance ring heaters with optimised air circulationdoor heating to avoid condensateCooling Concept twin compressor speed adjustable condenser fan refrigerant R404A Multiple Overtemperature Protection with audible and visual alarm in case of over-/undertemperature and over-/under-humidity, open door and empty water tank independently working, digitally adjustable electronic overtemperature controller, TWW protection class 3.3additional adjustable Auto-Safety-Function "ASF" for over- and undertemperature automatically following the set value at a preset tolerance range mechanical temperature limiter TB class 1 switching the heating off at approx.10°C above max. oven temperatureTemperature range:CTC/TTC: without humidity control: from -42°C up to +190°CCTC: with humidity control: from +10°C up to +95°CPower supply 400 V, 3ph, N, 50 HzStandards for CTC additionally:Electronically controlled active humidification and dehumidification from 10% to 98% rh with digital display of the relative humidity, display resolution 0.5%, setting accuracy 1%incl. works calibration certificate for +30°C at 60% rhHumidity supply with distilled water from 2 x 10 l tanks on integrated telescopic slide, with automatic water tank change-over2 x 10L tanks acting as condensate collectors, on telescopic slide mounts
€22.889,00
CO2 incubator, BBD 6220 | Type: 6-door tight fitting gas pinhole instead of glass door
CO2 incubator, BBD 6220 | Type: 6-door tight fitting gas pinhole instead of glass door
Merk: Thermo Elect.LED GmbH (Kendro)Beschikbaar in 7 varianten
€2.900,00
5678910

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    Algemene voorwaarden    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Onze website maakt gebruik van cookies.
Zowel wij en onze derde partij partners maken gebruik van cookies. Sommige zijn strikt noodzakelijk om de site te laten functioneren, maar er bestaan ook optionele cookies.

De noodzakelijke en functionele cookies staan altijd aan. Als je op "alle cookies aanvaarden" klikt accepteer je ook de optionele cookies. Je kan zelf kiezen welke cookies je aan wil zetten via "voorkeuren instellen".

Onze website maakt gebruik van cookies.
Wat zijn cookies? Welke cookies gebruiken we en waarom? Lees meer in ons cookiebeleid

Noodzakelijke cookies

Cookies die onontbeerlijk zijn voor uw bezoek aan de Website en het correct gebruik daarvan

Functionele cookies

Cookies die uw bezoek aan de Website vergemakkelijken en aangenamer maken, onder meer door uw surfervaring te personaliseren.

Performantie cookies

Cookies die informatie verzamelen over uw gebruik van de Website met de bedoeling de inhoud van de Website te verbeteren en aan te passen aan de wensen van de Gebruiker.

Derde partij cookies

Cookies die geplaatst worden door derden die eigen diensten aanbieden via de Website zoals bijvoorbeeld social media, advertenties of videodiensten.