Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

123456
Check flasks, DAkkS calibrated, boro 3.3, class A, with 3 marks, blue graduations | For volume ml: 100, upper/lower mark ± ml: 0.70, Ground size: NS14/23
Check flasks, DAkkS calibrated, boro 3.3, class A, with 3 marks, blue graduations | For volume ml: 100, upper/lower mark ± ml: 0.70, Ground size: NS14/23
Brand: BRAND GMBH + CO.KGAvailable in 4 variantsBLAUBRAND®, DIN EN ISO 1042. Calibrated to contain (TC, IN). DAkkS (former DKD) certificate included. The volumetric flask with 3 marks is used to check the functioning of a dispenser. The mark in the middle shows the nominal volume, the upper and lower marks show the error limits as specified in the table below. If the error limit is exceeded even with repeated measurements, the dispenser is defective. The DAkkS-calibrated volumetric flask does not replace the gravimetric test of the monitoring of measuring instruments according to ISO 8655.
€140,80
Flasks, volumetric, PMP (TPX) | Nominal capacity: 250 ml
Flasks, volumetric, PMP (TPX) | Nominal capacity: 250 ml
Brand: Kartell S.p.A.Available in 5 variantsWith stoppers.No meniscusCalibrated gravimetrically at 20 °CChemically non-absorbentNon wetting surfaceThick walls eliminate distortionFood-safeAutoclavable to 170 °C
€37,72
Flasks, volumetric, PP | Nominal capacity: 50 ml
Flasks, volumetric, PP | Nominal capacity: 50 ml
Brand: Kartell S.p.A.Available in 6 variantsWith stoppersNo meniscusCalibrated gravimetrically at 20 °CChemically non-absorbentNon wetting surfaceThick walls eliminate distortionFood-safeAutoclavable
€16,12
Graduated cylinders, PMP, Class A, tall form | Capacity ml: 100, Height mm: 250, Tolerance ± ml: 0,50
Graduated cylinders, PMP, Class A, tall form | Capacity ml: 100, Height mm: 250, Tolerance ± ml: 0,50
Brand: VITLAB GmbHAvailable in 8 variantsHighly transparent. DE-M marked. With red printed scale and ring marks at the primary scale points, calibrated "In".The lot certificate supplied bears the batch number and the actual nominal value ascertained under the test conditions. The resulting deviations from the nominal value fall well under the allowed tolerances of Class A according to DIN 12681 and ISO 6706. With printed batch number and the year of production. Hexagonal base with bottom studs provides high stability. To preserve markings, do not clean at temperatures exceeding 60 °C. Thus, conditionally autoclavable at 121 °C (2 bar) according to DIN EN 285. For autoclaving we recommend the design with raised graduations. Also available with DAkkS calibration certificate or individual quality certificate.
€13,31
Graduated cylinders, PP, class B, embossed scale | Capacity ml: 250, Grad. ml: 2.0, Tolerance ± ml: 2.0
Graduated cylinders, PP, class B, embossed scale | Capacity ml: 250, Grad. ml: 2.0, Tolerance ± ml: 2.0
Brand: Kartell S.p.A.Available in 8 variantsTall form, with spout, high clarity. Conforms to ISO 6706 - 1981 (E). Calibrated to contain (TC, In). Exposure to temperatures up to 80°C will not cause permanent exceeding of tolerance limits! Cleaning temperature below 60°C is recommended to preserve marks and inscriptions. Food-safe, autoclavable.
€12,08
Graduated cylinders, PP, class B, embossed scale | Capacity ml: 500, Grad. ml: 10, Tolerance ± ml: 10
Graduated cylinders, PP, class B, embossed scale | Capacity ml: 500, Grad. ml: 10, Tolerance ± ml: 10
Brand: BRAND GMBH + CO.KGAvailable in 6 variantsLow form. High clarity. Calibrated to contain (TD, In). Exposure to temperatures up to 80 °C will not cause tolerance limits to be exceeded!
€8,75
Graduated cylinders, PP, class B, low form, raised scale | Capacity ml: 25, Grad. ml: 0.50, Height mm: 122
Graduated cylinders, PP, class B, low form, raised scale | Capacity ml: 25, Grad. ml: 0.50, Height mm: 122
Brand: VITLAB GmbHAvailable in 6 variantsHighly transparent. With a raised scale and ring marks at the primary scale points, calibrated In'. Products individually packaged in PE bags, labelled with the article number, description and EAN code. Thermal stress up to 80°C does not cause tolerance limits to be permanently exceeded. Food-safe product according to regulation (EU) No. 10/2011.
€2,59
Graduated cylinders, PP, tall form, class B, embossed scale | Capacity ml: 25, Grad. ml: 0.5, Tolerance ± ml: 0.5
Graduated cylinders, PP, tall form, class B, embossed scale | Capacity ml: 25, Grad. ml: 0.5, Tolerance ± ml: 0.5
Brand: BRAND GMBH + CO.KGAvailable in 8 variantsTransparent. Exposure to temperatures up to 80°C will not cause permanent exceeding of tolerance limits! Cleaning temperature below 60°C is recommended to preserve marks and inscriptions.DIN 12681 and ISO 6706Calibrated to contain (TC, In)
€3,25
Graduated cylinders, SAN, class B, embossed scale | Capacity ml: 25, Grad. ml: 0.5, Tolerance ± ml: 0.5
Graduated cylinders, SAN, class B, embossed scale | Capacity ml: 25, Grad. ml: 0.5, Tolerance ± ml: 0.5
Brand: BRAND GMBH + CO.KGLow form. Calibrated to contain (TD, In). Exposure to temperatures up to 80°C will not cause accuracy to exceed tolerance limits!
€2,90
Kipp dispensers | Capacity ml: 10, Description: complete
Kipp dispensers | Capacity ml: 10, Description: complete
Brand: Lenz-Laborglas GmbH & Co. KGAvailable in 6 variantsDispenser head with bottle (1l) complete, ground joint connection: NS 29/32, head: DURAN® tubing, bottle: DURAN®
€57,09
LLG-Measuring cylinders, borosilicate glass 3.3, low form, class B | Nominal capacity: 250 ml, Grad. ml: 5.0, Tolerance: ±2.00 ml
LLG-Measuring cylinders, borosilicate glass 3.3, low form, class B | Nominal capacity: 250 ml, Grad. ml: 5.0, Tolerance: ±2.00 ml
Brand: LLG LabwareAvailable in 7 variantsLow form. Calibrated to contain (TC, IN).DIN EN ISO 4788With hexagonal base and spoutAmber graduation
€31,90
LLG-Measuring cylinders, borosilicate glass 3.3, tall form, class A | Nominal capacity: 25 ml, Grad. ml: 0.5, Tolerance: ±0.25 ml
LLG-Measuring cylinders, borosilicate glass 3.3, tall form, class A | Nominal capacity: 25 ml, Grad. ml: 0.5, Tolerance: ±0.25 ml
Brand: LLG LabwareAvailable in 9 variantsTall form. Conformity certified with batch ID.DIN EN ISO 4788With hexagonal base and spoutBlue graduation
€20,20
123456

Copyright © 2024 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.