Accessories
Analytical balances
Moisture balances
Other balances
Pocket balances
Precision balances
Weights
Analytical balances
Moisture balances
Other balances
Pocket balances
Precision balances
Weights
Buffer solutions
Electrode accessories
Ion selective Electrodes
Paper, chopstick
pH-Electrodes
Portable devices
Redox-Electrodes
Table devices
Electrode accessories
Ion selective Electrodes
Paper, chopstick
pH-Electrodes
Portable devices
Redox-Electrodes
Table devices
Overalls, coats, jackets, trousers
Overshoes, overboots, socks
Surgical masks, beard covers, hoods, sleeves
Overshoes, overboots, socks
Surgical masks, beard covers, hoods, sleeves
Chairs and stools
Gowing benches
Mats and floor coverings
Tables, shelves, trolleys, dispensers
Wardrobes
Gowing benches
Mats and floor coverings
Tables, shelves, trolleys, dispensers
Wardrobes
Components for Extraction
Components for reaction and distillation
Distillation-Accessories
Dropping Funnels
Flasks with NS joint neck
Flat ground flange reaction vessels
Gas wash bottles
Ground joints, attachable
KPG stirrer and bearings
Laboratory reactors
NS joints accessories
Reflux condenser
Standard ground stoppers
Stopcocks and Valves
Tubing adapters
Components for reaction and distillation
Distillation-Accessories
Dropping Funnels
Flasks with NS joint neck
Flat ground flange reaction vessels
Gas wash bottles
Ground joints, attachable
KPG stirrer and bearings
Laboratory reactors
NS joints accessories
Reflux condenser
Standard ground stoppers
Stopcocks and Valves
Tubing adapters
Biobanking
Cryogenic accessories
Cryogenic boxes
Cryogenic racks
Cryogenic storage tanks
Cryogenic tubes
Dewar flasks
Ice machines
Liquid nitrogen-Accessories
Low and Ultra low temperature freezers
Refrigerators and Freezers
Refrigerators and Freezers ex protected
Transport boxes
Cryogenic accessories
Cryogenic boxes
Cryogenic racks
Cryogenic storage tanks
Cryogenic tubes
Dewar flasks
Ice machines
Liquid nitrogen-Accessories
Low and Ultra low temperature freezers
Refrigerators and Freezers
Refrigerators and Freezers ex protected
Transport boxes
Concentration
DNA and RNA isolation
DNA-Electrophoresis
Electroporation
Gel-Documentation
PCR
PCR cabinets
Thermocyclers
DNA and RNA isolation
DNA-Electrophoresis
Electroporation
Gel-Documentation
PCR
PCR cabinets
Thermocyclers
Accessories and reagents
Dissecting sets
Embedding cassettes
Microtoms
Scalpels
Tissue floating baths
Dissecting sets
Embedding cassettes
Microtoms
Scalpels
Tissue floating baths
Cold light sources
Counting chambers
Digital microscopes and cameras
Light microscopes
Microscopy accessories
Slide covers
Slide storage
Slides
Staining racks
Stereomicroscopes
Counting chambers
Digital microscopes and cameras
Light microscopes
Microscopy accessories
Slide covers
Slide storage
Slides
Staining racks
Stereomicroscopes
Multi-parameter tester Pocket Tester SD40 Multi | Type: SD40 Multi, Temperature: 0 ... 50 °C, Accuracy temperature: ±0.5 °C
Brand: Tintometer GmbHPocket Tester with waterproof housing for measuring pH, conductivity, TDS, salinity, and temperature. Ideal for regular checks in industrial plants or swimming pools. With lanyard and clip on the device head.Three-colour LED lighting system (blue, green, red) and display symbols for easy handling3 multifunction buttons with symbolsUp to 3 calibration pointsWith stability indicator, auto-hold, and auto-off functionTransparent lid for measurement, calibration, and storage of the electrodeOptimised lid design for an upright and stable position of the testerBattery operation (4 x AAA batteries)Easy battery and electrode replacementMulti-parameter tester Pocket Tester SD40 Multi | Type: SD40 Multi, Temperature: 0 ... 50 °C, Accuracy temperature: ±0.5 °C
€185,00
Multiparameter meters SD 335 | Type: SD 335 Multi (Set 1) pH / Con / Temp.
Brand: Tintometer GmbHAvailable in 3 variantsDepending on the set, the portable multi-parameter measuring device is ideally suited for the precise determination of pH, redox, temperature, conductivity / TDS / salinity as well as saturation and concentration of dissolved oxygen.Intuitive user interface thanks to graphical LCD displaySimultaneous determination of up to three parameters due to galvanic isolationSelection between multi-parameter display or single value displaySetting of alarm limits for parameter monitoringMicro-USB connection for software-free data transmission and power supplyData logger records measurement data incl. time stamp and measuring point ID in a fixed time interval or manually at the push of a buttonAutomatic recognition of standard solutionsEvaluation of the sensor quality after calibrationRechargeable NiMH batteriesScope of supply: Meter, protective armouring, electrode holder for 2 electrodes, pH/temp. electrode type 231, pH buffer (4.01 / 7.00 / 10.01), storage solution for pH/ORP electrodes, 3 x AAA-NiMH rechargeable batteries, user manualSD 335 Multi (Set 1) pH / Con / Temp. additionally: Conductivity electrode LC 12 (< 200 mS/cm), conductivity solution 1413 µS/cm (NIST)SD 335 Multi (Set 2): pH / DO / Temp. additionally: Galvanic oxygen sensor (2 m cable), refill electrolyte, membrane heads, calibration bottle with spongeSD 335 Multi (Set 3): pH / Con / DO / Temp. additionally: Conductivity electrode LC 12 (< 200 mS/cm), conductivity solution 1413 µS/cm (NIST), galvanic oxygen sensor (2 m cable), refill electrolyte, membrane heads, calibration bottle with spongeMultiparameter meters SD 335 | Type: SD 335 Multi (Set 1) pH / Con / Temp.
€1.420,00
Multiparameter meters SD 335 | Type: SD 335 Multi (Set 2) pH / DO / Temp.
Brand: Tintometer GmbHAvailable in 3 variantsDepending on the set, the portable multi-parameter measuring device is ideally suited for the precise determination of pH, redox, temperature, conductivity / TDS / salinity as well as saturation and concentration of dissolved oxygen.Intuitive user interface thanks to graphical LCD displaySimultaneous determination of up to three parameters due to galvanic isolationSelection between multi-parameter display or single value displaySetting of alarm limits for parameter monitoringMicro-USB connection for software-free data transmission and power supplyData logger records measurement data incl. time stamp and measuring point ID in a fixed time interval or manually at the push of a buttonAutomatic recognition of standard solutionsEvaluation of the sensor quality after calibrationRechargeable NiMH batteriesScope of supply: Meter, protective armouring, electrode holder for 2 electrodes, pH/temp. electrode type 231, pH buffer (4.01 / 7.00 / 10.01), storage solution for pH/ORP electrodes, 3 x AAA-NiMH rechargeable batteries, user manualSD 335 Multi (Set 1) pH / Con / Temp. additionally: Conductivity electrode LC 12 (< 200 mS/cm), conductivity solution 1413 µS/cm (NIST)SD 335 Multi (Set 2): pH / DO / Temp. additionally: Galvanic oxygen sensor (2 m cable), refill electrolyte, membrane heads, calibration bottle with spongeSD 335 Multi (Set 3): pH / Con / DO / Temp. additionally: Conductivity electrode LC 12 (< 200 mS/cm), conductivity solution 1413 µS/cm (NIST), galvanic oxygen sensor (2 m cable), refill electrolyte, membrane heads, calibration bottle with spongeMultiparameter meters SD 335 | Type: SD 335 Multi (Set 2) pH / DO / Temp.
€1.420,00
Multiparameter meters SD 335 | Type: SD 335 Multi (Set 3) pH / Con / DO / Temp.
Brand: Tintometer GmbHAvailable in 3 variantsDepending on the set, the portable multi-parameter measuring device is ideally suited for the precise determination of pH, redox, temperature, conductivity / TDS / salinity as well as saturation and concentration of dissolved oxygen.Intuitive user interface thanks to graphical LCD displaySimultaneous determination of up to three parameters due to galvanic isolationSelection between multi-parameter display or single value displaySetting of alarm limits for parameter monitoringMicro-USB connection for software-free data transmission and power supplyData logger records measurement data incl. time stamp and measuring point ID in a fixed time interval or manually at the push of a buttonAutomatic recognition of standard solutionsEvaluation of the sensor quality after calibrationRechargeable NiMH batteriesScope of supply: Meter, protective armouring, electrode holder for 2 electrodes, pH/temp. electrode type 231, pH buffer (4.01 / 7.00 / 10.01), storage solution for pH/ORP electrodes, 3 x AAA-NiMH rechargeable batteries, user manualSD 335 Multi (Set 1) pH / Con / Temp. additionally: Conductivity electrode LC 12 (< 200 mS/cm), conductivity solution 1413 µS/cm (NIST)SD 335 Multi (Set 2): pH / DO / Temp. additionally: Galvanic oxygen sensor (2 m cable), refill electrolyte, membrane heads, calibration bottle with spongeSD 335 Multi (Set 3): pH / Con / DO / Temp. additionally: Conductivity electrode LC 12 (< 200 mS/cm), conductivity solution 1413 µS/cm (NIST), galvanic oxygen sensor (2 m cable), refill electrolyte, membrane heads, calibration bottle with spongeMultiparameter meters SD 335 | Type: SD 335 Multi (Set 3) pH / Con / DO / Temp.
€1.827,50
Multiparameter meters SensoDirect 150 | Type: SensoDirect 150 (Set 1) pH/Con/Oxi
Brand: Tintometer GmbHAvailable in 3 variantsThe SD 150 Multi-Parameter handheld instrument is ideal for the sequential determination of pH, Redox/ORP, conductivity, TDS and dissolved oxygen and combines the applications of several instruments in one portable device.Large, easy to read LCD display with contrast adjustmentAutomatic recognition of standard solutionsAutomatic temperature compensationReal time data loggerScope of supply: Instrument, batteries, protective armouring, electrode holder, pH electrode type 226, temperature sensor Pt1000, pH buffer, manualSensoDirect 150 (Set 1) pH / Con / TDS / Oxi / Temp. additionally: Conductivity cell, oxygen sensor, electrolyte, membrane headsSensoDirect 150 (Set 2) pH / Con / TDS /Temp. additionally: Conductivity cellSensoDirect 150 (Set 3) pH / Oxi / Temp. additionally: Oxygen sensor, electrolyte, membrane headsSensoDirect 150 (Set 4) pH / Redox / Temp. additionally: Redox electrodeMultiparameter meters SensoDirect 150 | Type: SensoDirect 150 (Set 1) pH/Con/Oxi
€787,10
Multiparameter meters SensoDirect 150 | Type: SensoDirect 150 (Set 2) pH/Con
Brand: Tintometer GmbHAvailable in 3 variantsThe SD 150 Multi-Parameter handheld instrument is ideal for the sequential determination of pH, Redox/ORP, conductivity, TDS and dissolved oxygen and combines the applications of several instruments in one portable device.Large, easy to read LCD display with contrast adjustmentAutomatic recognition of standard solutionsAutomatic temperature compensationReal time data loggerScope of supply: Instrument, batteries, protective armouring, electrode holder, pH electrode type 226, temperature sensor Pt1000, pH buffer, manualSensoDirect 150 (Set 1) pH / Con / TDS / Oxi / Temp. additionally: Conductivity cell, oxygen sensor, electrolyte, membrane headsSensoDirect 150 (Set 2) pH / Con / TDS /Temp. additionally: Conductivity cellSensoDirect 150 (Set 3) pH / Oxi / Temp. additionally: Oxygen sensor, electrolyte, membrane headsSensoDirect 150 (Set 4) pH / Redox / Temp. additionally: Redox electrodeMultiparameter meters SensoDirect 150 | Type: SensoDirect 150 (Set 2) pH/Con
€683,10
Multiparameter meters SensoDirect 150 | Type: SensoDirect 150 (Set 3) pH/Oxi
Brand: Tintometer GmbHAvailable in 3 variantsThe SD 150 Multi-Parameter handheld instrument is ideal for the sequential determination of pH, Redox/ORP, conductivity, TDS and dissolved oxygen and combines the applications of several instruments in one portable device.Large, easy to read LCD display with contrast adjustmentAutomatic recognition of standard solutionsAutomatic temperature compensationReal time data loggerScope of supply: Instrument, batteries, protective armouring, electrode holder, pH electrode type 226, temperature sensor Pt1000, pH buffer, manualSensoDirect 150 (Set 1) pH / Con / TDS / Oxi / Temp. additionally: Conductivity cell, oxygen sensor, electrolyte, membrane headsSensoDirect 150 (Set 2) pH / Con / TDS /Temp. additionally: Conductivity cellSensoDirect 150 (Set 3) pH / Oxi / Temp. additionally: Oxygen sensor, electrolyte, membrane headsSensoDirect 150 (Set 4) pH / Redox / Temp. additionally: Redox electrodeMultiparameter meters SensoDirect 150 | Type: SensoDirect 150 (Set 3) pH/Oxi
€717,90
Multiparameter meters SensoDirect 150 | Type: SensoDirect 150 (Set 4) pH/Redox
Brand: Tintometer GmbHAvailable in 3 variantsThe SD 150 Multi-Parameter handheld instrument is ideal for the sequential determination of pH, Redox/ORP, conductivity, TDS and dissolved oxygen and combines the applications of several instruments in one portable device.Large, easy to read LCD display with contrast adjustmentAutomatic recognition of standard solutionsAutomatic temperature compensationReal time data loggerScope of supply: Instrument, batteries, protective armouring, electrode holder, pH electrode type 226, temperature sensor Pt1000, pH buffer, manualSensoDirect 150 (Set 1) pH / Con / TDS / Oxi / Temp. additionally: Conductivity cell, oxygen sensor, electrolyte, membrane headsSensoDirect 150 (Set 2) pH / Con / TDS /Temp. additionally: Conductivity cellSensoDirect 150 (Set 3) pH / Oxi / Temp. additionally: Oxygen sensor, electrolyte, membrane headsSensoDirect 150 (Set 4) pH / Redox / Temp. additionally: Redox electrodeMultiparameter meters SensoDirect 150 | Type: SensoDirect 150 (Set 4) pH/Redox
€728,10
Copyright © 2024 - Achrom nv - BE 0445.025.508 | General terms | Cookiebeleid | Privacybeleid | Handcrafted by CrayonCru®