Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

Cole-Parmer Ltd. (Stuart)
1
Accessories for Water stills WS-100-4 / WS-200-4-220
Accessories for Water stills WS-100-4 / WS-200-4-220
Brand: Cole-Parmer Ltd. (Stuart)Available in 3 variants
€215,99
Accessories for Water stills WS-100-4 / WS-200-4-220
Accessories for Water stills WS-100-4 / WS-200-4-220
Brand: Cole-Parmer Ltd. (Stuart)Available in 3 variants
€634,47
Accessories for Water stills WS-100-4 / WS-200-4-220
Accessories for Water stills WS-100-4 / WS-200-4-220
Brand: Cole-Parmer Ltd. (Stuart)Available in 3 variants
€299,26
Coagulant injector for flocculation testers FJT-200D-6 | Description: Coagulant injector
Coagulant injector for flocculation testers FJT-200D-6 | Description: Coagulant injector
Brand: Cole-Parmer Ltd. (Stuart)For simultaneous injection of coagulant or reagents in six sample beakers.
€197,18
Flocculation testers FJT-200D | Type: FJT-200D, Description: Flocculation tester, 2-bank
Flocculation testers FJT-200D | Type: FJT-200D, Description: Flocculation tester, 2-bank
Brand: Cole-Parmer Ltd. (Stuart)Available in 2 variantsFor flocculation tests of water and waste water.choice of 2- or 6-bank modelsdigital speed displaytwo adjustable speed presetsaccurate and reproducible speedsdiffused base illumination with black backgroundaccepts beakers up to 1000ml.Adjustable speed range 25 to 250rpm. Dimensions (H x W x D): 460 x 320 x 220mm (two-bank model) 460 x 750 x 220mm (six-bank model). For 230 V 50 Hz, single phase supplies. Supplied with rotor blades but without beakers.With BioCote silver based antimicrobial protection.
€1.945,79
Flocculation testers FJT-200D | Type: FJT-200D-6, Description: Flocculation tester, 6-bank
Flocculation testers FJT-200D | Type: FJT-200D-6, Description: Flocculation tester, 6-bank
Brand: Cole-Parmer Ltd. (Stuart)Available in 2 variantsFor flocculation tests of water and waste water.choice of 2- or 6-bank modelsdigital speed displaytwo adjustable speed presetsaccurate and reproducible speedsdiffused base illumination with black backgroundaccepts beakers up to 1000ml.Adjustable speed range 25 to 250rpm. Dimensions (H x W x D): 460 x 320 x 220mm (two-bank model) 460 x 750 x 220mm (six-bank model). For 230 V 50 Hz, single phase supplies. Supplied with rotor blades but without beakers.With BioCote silver based antimicrobial protection.
€3.303,20
Water still WS-200A-8 | Type: WS-200A-8, Plug type: EU
Water still WS-200A-8 | Type: WS-200A-8, Plug type: EU
Brand: Cole-Parmer Ltd. (Stuart)Available in 2 variantsMade from borosilicate glass. For fully automated, unattended operation, equipped with over-temperature thermostat, flow meter and reservoir level control. The water still works with every water supply. With silica sheathed heaters for the production of 8 l pyrogen-free distillate of high purity from any raw water supply. Rapid descaling with no need to dismantle the device thanks to the integrated funnel for addition of acid and the PTFE stopcock for draining the cleaning solution. The acrylic safety screen and the cabinet lid are removable for unrivalled access to the glassware components. The water connections are equipped with screwthreads for easy and safe fitting and removing of hoses without risk of damage. All components are enclosed in a cabinet which can either stand on the laboratory bench or can be wall mounted.Automatic switch-off on full reservoirCan be operated from 20 kPa water pressureEasy to cleanWall mounting included
€6.310,47
Water still WS-200A-8 | Type: WS-200A-8, Plug type: UK
Water still WS-200A-8 | Type: WS-200A-8, Plug type: UK
Brand: Cole-Parmer Ltd. (Stuart)Available in 2 variantsMade from borosilicate glass. For fully automated, unattended operation, equipped with over-temperature thermostat, flow meter and reservoir level control. The water still works with every water supply. With silica sheathed heaters for the production of 8 l pyrogen-free distillate of high purity from any raw water supply. Rapid descaling with no need to dismantle the device thanks to the integrated funnel for addition of acid and the PTFE stopcock for draining the cleaning solution. The acrylic safety screen and the cabinet lid are removable for unrivalled access to the glassware components. The water connections are equipped with screwthreads for easy and safe fitting and removing of hoses without risk of damage. All components are enclosed in a cabinet which can either stand on the laboratory bench or can be wall mounted.Automatic switch-off on full reservoirCan be operated from 20 kPa water pressureEasy to cleanWall mounting included
€6.310,47
Water stills WS-100-4 / WS-200-4-220 | Type: WS-100-4
Water stills WS-100-4 / WS-200-4-220 | Type: WS-100-4
Brand: Cole-Parmer Ltd. (Stuart)Available in 2 variantsFor economic production of high purity distilled water. The devices are eqipped with 2 independent safety thermostats that prevent from overheating in the event of failure of the water supply. With built in acid addition funnel and stopcock for easy descaling without dismantling. Screwthreads are incorporated on all water connections so hoses can be fitted and removed easily and safely without risk of breakage. The condenser design ensures that the droplets of distilled water stay in contact with the cooling coil as long as possible for providing cold distilled water.Glass constructionAutomatic switch-off prevents overflowPre-drilled stand for easy wall mountingWith metal/silica sheated metal heaters
€1.528,84
Water stills WS-100-4 / WS-200-4-220 | Type: WS-200-4-220
Water stills WS-100-4 / WS-200-4-220 | Type: WS-200-4-220
Brand: Cole-Parmer Ltd. (Stuart)Available in 2 variantsFor economic production of high purity distilled water. The devices are eqipped with 2 independent safety thermostats that prevent from overheating in the event of failure of the water supply. With built in acid addition funnel and stopcock for easy descaling without dismantling. Screwthreads are incorporated on all water connections so hoses can be fitted and removed easily and safely without risk of breakage. The condenser design ensures that the droplets of distilled water stay in contact with the cooling coil as long as possible for providing cold distilled water.Glass constructionAutomatic switch-off prevents overflowPre-drilled stand for easy wall mountingWith metal/silica sheated metal heaters
€2.471,97
1

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.