Accessories
Analytical balances
Moisture balances
Other balances
Pocket balances
Precision balances
Weights
Analytical balances
Moisture balances
Other balances
Pocket balances
Precision balances
Weights
Buffer solutions
Electrode accessories
Ion selective Electrodes
Paper, chopstick
pH-Electrodes
Portable devices
Redox-Electrodes
Table devices
Electrode accessories
Ion selective Electrodes
Paper, chopstick
pH-Electrodes
Portable devices
Redox-Electrodes
Table devices
Overalls, coats, jackets, trousers
Overshoes, overboots, socks
Surgical masks, beard covers, hoods, sleeves
Overshoes, overboots, socks
Surgical masks, beard covers, hoods, sleeves
Chairs and stools
Gowing benches
Mats and floor coverings
Tables, shelves, trolleys, dispensers
Wardrobes
Gowing benches
Mats and floor coverings
Tables, shelves, trolleys, dispensers
Wardrobes
Components for Extraction
Components for reaction and distillation
Distillation-Accessories
Dropping Funnels
Flasks with NS joint neck
Flat ground flange reaction vessels
Gas wash bottles
Ground joints, attachable
KPG stirrer and bearings
Laboratory reactors
NS joints accessories
Reflux condenser
Standard ground stoppers
Stopcocks and Valves
Tubing adapters
Components for reaction and distillation
Distillation-Accessories
Dropping Funnels
Flasks with NS joint neck
Flat ground flange reaction vessels
Gas wash bottles
Ground joints, attachable
KPG stirrer and bearings
Laboratory reactors
NS joints accessories
Reflux condenser
Standard ground stoppers
Stopcocks and Valves
Tubing adapters
Biobanking
Cryogenic accessories
Cryogenic boxes
Cryogenic racks
Cryogenic storage tanks
Cryogenic tubes
Dewar flasks
Ice machines
Liquid nitrogen-Accessories
Low and Ultra low temperature freezers
Refrigerators and Freezers
Refrigerators and Freezers ex protected
Transport boxes
Cryogenic accessories
Cryogenic boxes
Cryogenic racks
Cryogenic storage tanks
Cryogenic tubes
Dewar flasks
Ice machines
Liquid nitrogen-Accessories
Low and Ultra low temperature freezers
Refrigerators and Freezers
Refrigerators and Freezers ex protected
Transport boxes
Concentration
DNA and RNA isolation
DNA-Electrophoresis
Electroporation
Gel-Documentation
PCR
PCR cabinets
Thermocyclers
DNA and RNA isolation
DNA-Electrophoresis
Electroporation
Gel-Documentation
PCR
PCR cabinets
Thermocyclers
Accessories and reagents
Dissecting sets
Embedding cassettes
Microtoms
Scalpels
Tissue floating baths
Dissecting sets
Embedding cassettes
Microtoms
Scalpels
Tissue floating baths
Cold light sources
Counting chambers
Digital microscopes and cameras
Light microscopes
Microscopy accessories
Slide covers
Slide storage
Slides
Staining racks
Stereomicroscopes
Counting chambers
Digital microscopes and cameras
Light microscopes
Microscopy accessories
Slide covers
Slide storage
Slides
Staining racks
Stereomicroscopes
- A. Krüss Optronic GmbH
- Almedica AG
- Arctiko A/S
- Bandelin electronic
- Behr Labor-Technik GmbH
- Bel-Art Products
- Benchmark Scientific
- BINDER GmbH
- Bohlender GmbH
- BRAND GMBH + CO.KG
- Büchi Labortechnik GmbH
- Buddeberg GmbH
- Bürkle GmbH
- C. Gerhardt GmbH & Co.KG
- Camping Gaz (Deutschland) GmbH
- Cole-Parmer Ltd. (Electro)
- Cole-Parmer Ltd. (Stuart)
- Corning BV
- Cryonos GmbH
- Crystal Technology &
- Dacos A/S
- DWK Life Sciences GmbH (Duran)
- Elcold Frysere aps
- Eppendorf SE
- ESCO Lifesciences GmbH
- eutecma GmbH
- Fryka-Kältetechnik GmbH
- Funke- Dr. N. Gerber
- Glaswarenfabrik Karl Hecht
- Grant Instruments Ltd.
- Greiner Bio-One GmbH
- H+H System GmbH
- Harry Gestigkeit GmbH
- Heathrow Scientific DBT
- Heathrow Scientific LLC
- Heidolph Instruments
- Heinz Herenz
- Hettich Benelux B.V.
- HIBU Eismaschinen
- IKA-Werke GmbH & Co.KG
- ISOHEAT GmbH
- ISOLAB Laborgeräte GmbH
- Juchheim GmbH & Co.KG
- Julabo GmbH
- KGW Schieder GmbH
- Kundert Vario AG
- Laborgeräte Süd GmbH & Co.KG
- Lauda Dr.R.Wobser GmbH & Co.KG
- Lenz-Laborglas GmbH & Co. KG
- Liebherr-Hausgeräte
- LLG Labware
- Macherey-Nagel GmbH & Co. KG
- Memmert GmbH + Co. KG
- messner emtronic
- Nabertherm GmbH
- Nordiclab ApS
- Ohaus GmbH
- Peter Huber Kältemaschinenbau
- PolyScience
- Ratiolab GmbH
- Rommelsbacher
- Sartorius Lab Instruments
- Scientific Industries, Inc.
- siehe 9400264 Thistle Scientif
- Snoltherm UAB
- Sonepar Deutschland/
- Storopack Deutschland GmbH
- Surplus Systems GmbH
- TENAK A/S
- Thermo Elect.LED GmbH (HaakeTC
- Thermo Elect.LED GmbH (Kendro)
- Thermo Elect.LED GmbH (Matrix)
- Thermo Elect.LED GmbH (Nalge)
- Thermo Elect.LED GmbH (Nunc)
- Tintometer GmbH
- Velp Scientifica SRL
- Welbilt Deutschland GmbH
Ashing/Burn off furnaces LV 3/11 - LVT 15/11 | Type/Controller: LV 15/11/B510, Capacity litres: 15, External dimensions (W x D x H) mm: 415 x 585 x 845
Brand: Nabertherm GmbHAvailable in 16 variantsThe models LV 3/11 - LVT 15/11 are especially designed for ashing in the laboratory. A special air intake and exhaust system allows air exchange of more than 6 times per minute. Incoming air is preheated to ensure a good temperature uniformity.Tmax 1100°CHeating from two sidesCeramic heating plates with integral heating element which is safeguarded against fumes and splashing, and easy to replaceInsulation only made of materials that are classified as not carcinogenic acc. to TRGS 905, class 1 or 2Housing made of sheets of textured stainless steelDual shell housing for low external temperatures and stabilityOptional flap door (LV) which can be used as work platform or lift door (LVT) with hot surface facing away from the operatorSolid state relays provide for low noise operationAir exchange of more than 6 times per minuteGood temperature uniformity due to preheating of incoming air220-240 V 1/N/PE 50/60 Hz connector as standardOption:Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadObservation hole in the oven doorProcess control and documentation via VCD software package for monitoring, documentation and controlAshing/Burn off furnaces LV 3/11 - LVT 15/11 | Type/Controller: LV 15/11/B510, Capacity litres: 15, External dimensions (W x D x H) mm: 415 x 585 x 845
€6.080,00
Ashing/Burn off furnaces LV 3/11 - LVT 15/11 | Type/Controller: LV 15/11/C550, Capacity litres: 15, External dimensions (W x D x H) mm: 415 x 585 x 845
Brand: Nabertherm GmbHAvailable in 16 variantsThe models LV 3/11 - LVT 15/11 are especially designed for ashing in the laboratory. A special air intake and exhaust system allows air exchange of more than 6 times per minute. Incoming air is preheated to ensure a good temperature uniformity.Tmax 1100°CHeating from two sidesCeramic heating plates with integral heating element which is safeguarded against fumes and splashing, and easy to replaceInsulation only made of materials that are classified as not carcinogenic acc. to TRGS 905, class 1 or 2Housing made of sheets of textured stainless steelDual shell housing for low external temperatures and stabilityOptional flap door (LV) which can be used as work platform or lift door (LVT) with hot surface facing away from the operatorSolid state relays provide for low noise operationAir exchange of more than 6 times per minuteGood temperature uniformity due to preheating of incoming air220-240 V 1/N/PE 50/60 Hz connector as standardOption:Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadObservation hole in the oven doorProcess control and documentation via VCD software package for monitoring, documentation and controlAshing/Burn off furnaces LV 3/11 - LVT 15/11 | Type/Controller: LV 15/11/C550, Capacity litres: 15, External dimensions (W x D x H) mm: 415 x 585 x 845
€6.830,00
Ashing/Burn off furnaces LV 3/11 - LVT 15/11 | Type/Controller: LV 3/11/B510, Capacity litres: 3, External dimensions (W x D x H) mm: 385 x 360 x 735
Brand: Nabertherm GmbHAvailable in 16 variantsThe models LV 3/11 - LVT 15/11 are especially designed for ashing in the laboratory. A special air intake and exhaust system allows air exchange of more than 6 times per minute. Incoming air is preheated to ensure a good temperature uniformity.Tmax 1100°CHeating from two sidesCeramic heating plates with integral heating element which is safeguarded against fumes and splashing, and easy to replaceInsulation only made of materials that are classified as not carcinogenic acc. to TRGS 905, class 1 or 2Housing made of sheets of textured stainless steelDual shell housing for low external temperatures and stabilityOptional flap door (LV) which can be used as work platform or lift door (LVT) with hot surface facing away from the operatorSolid state relays provide for low noise operationAir exchange of more than 6 times per minuteGood temperature uniformity due to preheating of incoming air220-240 V 1/N/PE 50/60 Hz connector as standardOption:Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadObservation hole in the oven doorProcess control and documentation via VCD software package for monitoring, documentation and controlAshing/Burn off furnaces LV 3/11 - LVT 15/11 | Type/Controller: LV 3/11/B510, Capacity litres: 3, External dimensions (W x D x H) mm: 385 x 360 x 735
€3.600,00
Ashing/Burn off furnaces LV 3/11 - LVT 15/11 | Type/Controller: LV 3/11/C550, Capacity litres: 3, External dimensions (W x D x H) mm: 385 x 360 x 735
Brand: Nabertherm GmbHAvailable in 16 variantsThe models LV 3/11 - LVT 15/11 are especially designed for ashing in the laboratory. A special air intake and exhaust system allows air exchange of more than 6 times per minute. Incoming air is preheated to ensure a good temperature uniformity.Tmax 1100°CHeating from two sidesCeramic heating plates with integral heating element which is safeguarded against fumes and splashing, and easy to replaceInsulation only made of materials that are classified as not carcinogenic acc. to TRGS 905, class 1 or 2Housing made of sheets of textured stainless steelDual shell housing for low external temperatures and stabilityOptional flap door (LV) which can be used as work platform or lift door (LVT) with hot surface facing away from the operatorSolid state relays provide for low noise operationAir exchange of more than 6 times per minuteGood temperature uniformity due to preheating of incoming air220-240 V 1/N/PE 50/60 Hz connector as standardOption:Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadObservation hole in the oven doorProcess control and documentation via VCD software package for monitoring, documentation and controlAshing/Burn off furnaces LV 3/11 - LVT 15/11 | Type/Controller: LV 3/11/C550, Capacity litres: 3, External dimensions (W x D x H) mm: 385 x 360 x 735
€4.350,00
Ashing/Burn off furnaces LV 3/11 - LVT 15/11 | Type/Controller: LV 5/11/B510, Capacity litres: 5, External dimensions (W x D x H) mm: 385 x 420 x 790
Brand: Nabertherm GmbHAvailable in 16 variantsThe models LV 3/11 - LVT 15/11 are especially designed for ashing in the laboratory. A special air intake and exhaust system allows air exchange of more than 6 times per minute. Incoming air is preheated to ensure a good temperature uniformity.Tmax 1100°CHeating from two sidesCeramic heating plates with integral heating element which is safeguarded against fumes and splashing, and easy to replaceInsulation only made of materials that are classified as not carcinogenic acc. to TRGS 905, class 1 or 2Housing made of sheets of textured stainless steelDual shell housing for low external temperatures and stabilityOptional flap door (LV) which can be used as work platform or lift door (LVT) with hot surface facing away from the operatorSolid state relays provide for low noise operationAir exchange of more than 6 times per minuteGood temperature uniformity due to preheating of incoming air220-240 V 1/N/PE 50/60 Hz connector as standardOption:Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadObservation hole in the oven doorProcess control and documentation via VCD software package for monitoring, documentation and controlAshing/Burn off furnaces LV 3/11 - LVT 15/11 | Type/Controller: LV 5/11/B510, Capacity litres: 5, External dimensions (W x D x H) mm: 385 x 420 x 790
€4.500,00
Ashing/Burn off furnaces LV 3/11 - LVT 15/11 | Type/Controller: LV 5/11/C550, Capacity litres: 5, External dimensions (W x D x H) mm: 385 x 420 x 790
Brand: Nabertherm GmbHAvailable in 16 variantsThe models LV 3/11 - LVT 15/11 are especially designed for ashing in the laboratory. A special air intake and exhaust system allows air exchange of more than 6 times per minute. Incoming air is preheated to ensure a good temperature uniformity.Tmax 1100°CHeating from two sidesCeramic heating plates with integral heating element which is safeguarded against fumes and splashing, and easy to replaceInsulation only made of materials that are classified as not carcinogenic acc. to TRGS 905, class 1 or 2Housing made of sheets of textured stainless steelDual shell housing for low external temperatures and stabilityOptional flap door (LV) which can be used as work platform or lift door (LVT) with hot surface facing away from the operatorSolid state relays provide for low noise operationAir exchange of more than 6 times per minuteGood temperature uniformity due to preheating of incoming air220-240 V 1/N/PE 50/60 Hz connector as standardOption:Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadObservation hole in the oven doorProcess control and documentation via VCD software package for monitoring, documentation and controlAshing/Burn off furnaces LV 3/11 - LVT 15/11 | Type/Controller: LV 5/11/C550, Capacity litres: 5, External dimensions (W x D x H) mm: 385 x 420 x 790
€5.250,00
Ashing/Burn off furnaces LV 3/11 - LVT 15/11 | Type/Controller: LV 9/11/B510, Capacity litres: 9, External dimensions (W x D x H) mm: 415 x 485 x 845
Brand: Nabertherm GmbHAvailable in 16 variantsThe models LV 3/11 - LVT 15/11 are especially designed for ashing in the laboratory. A special air intake and exhaust system allows air exchange of more than 6 times per minute. Incoming air is preheated to ensure a good temperature uniformity.Tmax 1100°CHeating from two sidesCeramic heating plates with integral heating element which is safeguarded against fumes and splashing, and easy to replaceInsulation only made of materials that are classified as not carcinogenic acc. to TRGS 905, class 1 or 2Housing made of sheets of textured stainless steelDual shell housing for low external temperatures and stabilityOptional flap door (LV) which can be used as work platform or lift door (LVT) with hot surface facing away from the operatorSolid state relays provide for low noise operationAir exchange of more than 6 times per minuteGood temperature uniformity due to preheating of incoming air220-240 V 1/N/PE 50/60 Hz connector as standardOption:Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadObservation hole in the oven doorProcess control and documentation via VCD software package for monitoring, documentation and controlAshing/Burn off furnaces LV 3/11 - LVT 15/11 | Type/Controller: LV 9/11/B510, Capacity litres: 9, External dimensions (W x D x H) mm: 415 x 485 x 845
€5.020,00
Ashing/Burn off furnaces LV 3/11 - LVT 15/11 | Type/Controller: LV 9/11/C550, Capacity litres: 9, External dimensions (W x D x H) mm: 415 x 485 x 845
Brand: Nabertherm GmbHAvailable in 16 variantsThe models LV 3/11 - LVT 15/11 are especially designed for ashing in the laboratory. A special air intake and exhaust system allows air exchange of more than 6 times per minute. Incoming air is preheated to ensure a good temperature uniformity.Tmax 1100°CHeating from two sidesCeramic heating plates with integral heating element which is safeguarded against fumes and splashing, and easy to replaceInsulation only made of materials that are classified as not carcinogenic acc. to TRGS 905, class 1 or 2Housing made of sheets of textured stainless steelDual shell housing for low external temperatures and stabilityOptional flap door (LV) which can be used as work platform or lift door (LVT) with hot surface facing away from the operatorSolid state relays provide for low noise operationAir exchange of more than 6 times per minuteGood temperature uniformity due to preheating of incoming air220-240 V 1/N/PE 50/60 Hz connector as standardOption:Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadObservation hole in the oven doorProcess control and documentation via VCD software package for monitoring, documentation and controlAshing/Burn off furnaces LV 3/11 - LVT 15/11 | Type/Controller: LV 9/11/C550, Capacity litres: 9, External dimensions (W x D x H) mm: 415 x 485 x 845
€5.770,00
Ashing/Burn off furnaces LV 3/11 - LVT 15/11 | Type/Controller: LVT 15/11/B510, Capacity litres: 15, External dimensions (W x D x H) mm: 415 x 585 x 845
Brand: Nabertherm GmbHAvailable in 16 variantsThe models LV 3/11 - LVT 15/11 are especially designed for ashing in the laboratory. A special air intake and exhaust system allows air exchange of more than 6 times per minute. Incoming air is preheated to ensure a good temperature uniformity.Tmax 1100°CHeating from two sidesCeramic heating plates with integral heating element which is safeguarded against fumes and splashing, and easy to replaceInsulation only made of materials that are classified as not carcinogenic acc. to TRGS 905, class 1 or 2Housing made of sheets of textured stainless steelDual shell housing for low external temperatures and stabilityOptional flap door (LV) which can be used as work platform or lift door (LVT) with hot surface facing away from the operatorSolid state relays provide for low noise operationAir exchange of more than 6 times per minuteGood temperature uniformity due to preheating of incoming air220-240 V 1/N/PE 50/60 Hz connector as standardOption:Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadObservation hole in the oven doorProcess control and documentation via VCD software package for monitoring, documentation and controlAshing/Burn off furnaces LV 3/11 - LVT 15/11 | Type/Controller: LVT 15/11/B510, Capacity litres: 15, External dimensions (W x D x H) mm: 415 x 585 x 845
€6.080,00
Ashing/Burn off furnaces LV 3/11 - LVT 15/11 | Type/Controller: LVT 15/11/C550, Capacity litres: 15, External dimensions (W x D x H) mm: 415 x 585 x 845
Brand: Nabertherm GmbHAvailable in 16 variantsThe models LV 3/11 - LVT 15/11 are especially designed for ashing in the laboratory. A special air intake and exhaust system allows air exchange of more than 6 times per minute. Incoming air is preheated to ensure a good temperature uniformity.Tmax 1100°CHeating from two sidesCeramic heating plates with integral heating element which is safeguarded against fumes and splashing, and easy to replaceInsulation only made of materials that are classified as not carcinogenic acc. to TRGS 905, class 1 or 2Housing made of sheets of textured stainless steelDual shell housing for low external temperatures and stabilityOptional flap door (LV) which can be used as work platform or lift door (LVT) with hot surface facing away from the operatorSolid state relays provide for low noise operationAir exchange of more than 6 times per minuteGood temperature uniformity due to preheating of incoming air220-240 V 1/N/PE 50/60 Hz connector as standardOption:Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadObservation hole in the oven doorProcess control and documentation via VCD software package for monitoring, documentation and controlAshing/Burn off furnaces LV 3/11 - LVT 15/11 | Type/Controller: LVT 15/11/C550, Capacity litres: 15, External dimensions (W x D x H) mm: 415 x 585 x 845
€6.830,00
Ashing/Burn off furnaces LV 3/11 - LVT 15/11 | Type/Controller: LVT 3/11/B510, Capacity litres: 3, External dimensions (W x D x H) mm: 385 x 360 x 735
Brand: Nabertherm GmbHAvailable in 16 variantsThe models LV 3/11 - LVT 15/11 are especially designed for ashing in the laboratory. A special air intake and exhaust system allows air exchange of more than 6 times per minute. Incoming air is preheated to ensure a good temperature uniformity.Tmax 1100°CHeating from two sidesCeramic heating plates with integral heating element which is safeguarded against fumes and splashing, and easy to replaceInsulation only made of materials that are classified as not carcinogenic acc. to TRGS 905, class 1 or 2Housing made of sheets of textured stainless steelDual shell housing for low external temperatures and stabilityOptional flap door (LV) which can be used as work platform or lift door (LVT) with hot surface facing away from the operatorSolid state relays provide for low noise operationAir exchange of more than 6 times per minuteGood temperature uniformity due to preheating of incoming air220-240 V 1/N/PE 50/60 Hz connector as standardOption:Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadObservation hole in the oven doorProcess control and documentation via VCD software package for monitoring, documentation and controlAshing/Burn off furnaces LV 3/11 - LVT 15/11 | Type/Controller: LVT 3/11/B510, Capacity litres: 3, External dimensions (W x D x H) mm: 385 x 360 x 735
€3.600,00
Ashing/Burn off furnaces LV 3/11 - LVT 15/11 | Type/Controller: LVT 3/11/C550, Capacity litres: 3, External dimensions (W x D x H) mm: 385 x 360 x 735
Brand: Nabertherm GmbHAvailable in 16 variantsThe models LV 3/11 - LVT 15/11 are especially designed for ashing in the laboratory. A special air intake and exhaust system allows air exchange of more than 6 times per minute. Incoming air is preheated to ensure a good temperature uniformity.Tmax 1100°CHeating from two sidesCeramic heating plates with integral heating element which is safeguarded against fumes and splashing, and easy to replaceInsulation only made of materials that are classified as not carcinogenic acc. to TRGS 905, class 1 or 2Housing made of sheets of textured stainless steelDual shell housing for low external temperatures and stabilityOptional flap door (LV) which can be used as work platform or lift door (LVT) with hot surface facing away from the operatorSolid state relays provide for low noise operationAir exchange of more than 6 times per minuteGood temperature uniformity due to preheating of incoming air220-240 V 1/N/PE 50/60 Hz connector as standardOption:Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadObservation hole in the oven doorProcess control and documentation via VCD software package for monitoring, documentation and controlAshing/Burn off furnaces LV 3/11 - LVT 15/11 | Type/Controller: LVT 3/11/C550, Capacity litres: 3, External dimensions (W x D x H) mm: 385 x 360 x 735
€4.350,00
Copyright © 2024 - Achrom nv - BE 0445.025.508 | General terms | Cookiebeleid | Privacybeleid | Handcrafted by CrayonCru®