Accessories
Analytical balances
Moisture balances
Other balances
Pocket balances
Precision balances
Weights
Analytical balances
Moisture balances
Other balances
Pocket balances
Precision balances
Weights
Buffer solutions
Electrode accessories
Ion selective Electrodes
Paper, chopstick
pH-Electrodes
Portable devices
Redox-Electrodes
Table devices
Electrode accessories
Ion selective Electrodes
Paper, chopstick
pH-Electrodes
Portable devices
Redox-Electrodes
Table devices
Overalls, coats, jackets, trousers
Overshoes, overboots, socks
Surgical masks, beard covers, hoods, sleeves
Overshoes, overboots, socks
Surgical masks, beard covers, hoods, sleeves
Chairs and stools
Gowing benches
Mats and floor coverings
Tables, shelves, trolleys, dispensers
Wardrobes
Gowing benches
Mats and floor coverings
Tables, shelves, trolleys, dispensers
Wardrobes
Components for Extraction
Components for reaction and distillation
Distillation-Accessories
Dropping Funnels
Flasks with NS joint neck
Flat ground flange reaction vessels
Gas wash bottles
Ground joints, attachable
KPG stirrer and bearings
Laboratory reactors
NS joints accessories
Reflux condenser
Standard ground stoppers
Stopcocks and Valves
Tubing adapters
Components for reaction and distillation
Distillation-Accessories
Dropping Funnels
Flasks with NS joint neck
Flat ground flange reaction vessels
Gas wash bottles
Ground joints, attachable
KPG stirrer and bearings
Laboratory reactors
NS joints accessories
Reflux condenser
Standard ground stoppers
Stopcocks and Valves
Tubing adapters
Biobanking
Cryogenic accessories
Cryogenic boxes
Cryogenic racks
Cryogenic storage tanks
Cryogenic tubes
Dewar flasks
Ice machines
Liquid nitrogen-Accessories
Low and Ultra low temperature freezers
Refrigerators and Freezers
Refrigerators and Freezers ex protected
Transport boxes
Cryogenic accessories
Cryogenic boxes
Cryogenic racks
Cryogenic storage tanks
Cryogenic tubes
Dewar flasks
Ice machines
Liquid nitrogen-Accessories
Low and Ultra low temperature freezers
Refrigerators and Freezers
Refrigerators and Freezers ex protected
Transport boxes
Concentration
DNA and RNA isolation
DNA-Electrophoresis
Electroporation
Gel-Documentation
PCR
PCR cabinets
Thermocyclers
DNA and RNA isolation
DNA-Electrophoresis
Electroporation
Gel-Documentation
PCR
PCR cabinets
Thermocyclers
Accessories and reagents
Dissecting sets
Embedding cassettes
Microtoms
Scalpels
Tissue floating baths
Dissecting sets
Embedding cassettes
Microtoms
Scalpels
Tissue floating baths
Cold light sources
Counting chambers
Digital microscopes and cameras
Light microscopes
Microscopy accessories
Slide covers
Slide storage
Slides
Staining racks
Stereomicroscopes
Counting chambers
Digital microscopes and cameras
Light microscopes
Microscopy accessories
Slide covers
Slide storage
Slides
Staining racks
Stereomicroscopes
- A. Krüss Optronic GmbH
- Almedica AG
- Arctiko A/S
- Bandelin electronic
- Behr Labor-Technik GmbH
- Bel-Art Products
- Benchmark Scientific
- BINDER GmbH
- Bohlender GmbH
- BRAND GMBH + CO.KG
- Büchi Labortechnik GmbH
- Buddeberg GmbH
- Bürkle GmbH
- C. Gerhardt GmbH & Co.KG
- Camping Gaz (Deutschland) GmbH
- Cole-Parmer Ltd. (Electro)
- Cole-Parmer Ltd. (Stuart)
- Corning BV
- Cryonos GmbH
- Crystal Technology &
- Dacos A/S
- DWK Life Sciences GmbH (Duran)
- Elcold Frysere aps
- Eppendorf SE
- ESCO Lifesciences GmbH
- eutecma GmbH
- Fryka-Kältetechnik GmbH
- Funke- Dr. N. Gerber
- Glaswarenfabrik Karl Hecht
- Grant Instruments Ltd.
- Greiner Bio-One GmbH
- H+H System GmbH
- Harry Gestigkeit GmbH
- Heathrow Scientific DBT
- Heathrow Scientific LLC
- Heidolph Instruments
- Heinz Herenz
- Hettich Benelux B.V.
- HIBU Eismaschinen
- IKA-Werke GmbH & Co.KG
- ISOHEAT GmbH
- ISOLAB Laborgeräte GmbH
- Juchheim GmbH & Co.KG
- Julabo GmbH
- KGW Schieder GmbH
- Kundert Vario AG
- Laborgeräte Süd GmbH & Co.KG
- Lauda Dr.R.Wobser GmbH & Co.KG
- Lenz-Laborglas GmbH & Co. KG
- Liebherr-Hausgeräte
- LLG Labware
- Macherey-Nagel GmbH & Co. KG
- Memmert GmbH + Co. KG
- messner emtronic
- Nabertherm GmbH
- Nordiclab ApS
- Ohaus GmbH
- Peter Huber Kältemaschinenbau
- PolyScience
- Ratiolab GmbH
- Rommelsbacher
- Sartorius Lab Instruments
- Scientific Industries, Inc.
- siehe 9400264 Thistle Scientif
- Snoltherm UAB
- Sonepar Deutschland/
- Storopack Deutschland GmbH
- Surplus Systems GmbH
- TENAK A/S
- Thermo Elect.LED GmbH (HaakeTC
- Thermo Elect.LED GmbH (Kendro)
- Thermo Elect.LED GmbH (Matrix)
- Thermo Elect.LED GmbH (Nalge)
- Thermo Elect.LED GmbH (Nunc)
- Tintometer GmbH
- Velp Scientifica SRL
- Welbilt Deutschland GmbH
Bath liquids for thermostatic baths | Type: SIL 100, Capacity l: 10, Temp. range °C: -75 ... 75
Brand: Thermo Elect.LED GmbH (HaakeTCAvailable in 12 variantsBath liquids.Use of the appropriate liquids for heat transfer listed here offers many advantages:Safe to use, non toxic, and generally odourless formulationsResistance to ageing and viscosity changes with low susceptibility to corrosion.Silicone oils (SIL).Non-flammable, with long operational life.Synthetic heat transfer fluids (Synth).Usually formulated from a hydrocarbon base with low viscosity within the recommended working temperature range.Viscosity.For optimal temperature stability the bath fluid must be of low viscosity.Fire point.Fluids can spontaneously ignite above a certain temperature. EN 61010 stipulates that the maximum working temperature of the liquid should be 25 °C below its' fire point.Heating up range.Prolonged use is not permitted as the self-heating effect within these liquids may cause the overtemperature protection system of the pump unit to operate and shut down the pump.Operating temperature range.Thermostats may only be operated for an extended time in this range under certain conditions. Viscosity must not exceed 30 mPas. Otherwise pumps will not achieve their stated performance figures.Working temperature range.The long-term use range for peak thermostatic bath performance. Maximum viscosity level is approx. 5 mPas.Bath liquids for thermostatic baths | Type: SIL 100, Capacity l: 10, Temp. range °C: -75 ... 75
€997,00
Bath liquids for thermostatic baths | Type: SIL 100, Capacity l: 5, Temp. range °C: -75 ... 75
Brand: Thermo Elect.LED GmbH (HaakeTCAvailable in 12 variantsBath liquids.Use of the appropriate liquids for heat transfer listed here offers many advantages:Safe to use, non toxic, and generally odourless formulationsResistance to ageing and viscosity changes with low susceptibility to corrosion.Silicone oils (SIL).Non-flammable, with long operational life.Synthetic heat transfer fluids (Synth).Usually formulated from a hydrocarbon base with low viscosity within the recommended working temperature range.Viscosity.For optimal temperature stability the bath fluid must be of low viscosity.Fire point.Fluids can spontaneously ignite above a certain temperature. EN 61010 stipulates that the maximum working temperature of the liquid should be 25 °C below its' fire point.Heating up range.Prolonged use is not permitted as the self-heating effect within these liquids may cause the overtemperature protection system of the pump unit to operate and shut down the pump.Operating temperature range.Thermostats may only be operated for an extended time in this range under certain conditions. Viscosity must not exceed 30 mPas. Otherwise pumps will not achieve their stated performance figures.Working temperature range.The long-term use range for peak thermostatic bath performance. Maximum viscosity level is approx. 5 mPas.Bath liquids for thermostatic baths | Type: SIL 100, Capacity l: 5, Temp. range °C: -75 ... 75
€532,00
Bath liquids for thermostatic baths | Type: SIL 180, Capacity l: 10, Temp. range °C: -40 ... 200
Brand: Thermo Elect.LED GmbH (HaakeTCAvailable in 12 variantsBath liquids.Use of the appropriate liquids for heat transfer listed here offers many advantages:Safe to use, non toxic, and generally odourless formulationsResistance to ageing and viscosity changes with low susceptibility to corrosion.Silicone oils (SIL).Non-flammable, with long operational life.Synthetic heat transfer fluids (Synth).Usually formulated from a hydrocarbon base with low viscosity within the recommended working temperature range.Viscosity.For optimal temperature stability the bath fluid must be of low viscosity.Fire point.Fluids can spontaneously ignite above a certain temperature. EN 61010 stipulates that the maximum working temperature of the liquid should be 25 °C below its' fire point.Heating up range.Prolonged use is not permitted as the self-heating effect within these liquids may cause the overtemperature protection system of the pump unit to operate and shut down the pump.Operating temperature range.Thermostats may only be operated for an extended time in this range under certain conditions. Viscosity must not exceed 30 mPas. Otherwise pumps will not achieve their stated performance figures.Working temperature range.The long-term use range for peak thermostatic bath performance. Maximum viscosity level is approx. 5 mPas.Bath liquids for thermostatic baths | Type: SIL 180, Capacity l: 10, Temp. range °C: -40 ... 200
€537,00
Bath liquids for thermostatic baths | Type: SIL 180, Capacity l: 5, Temp. range °C: -40 ... 200
Brand: Thermo Elect.LED GmbH (HaakeTCAvailable in 12 variantsBath liquids.Use of the appropriate liquids for heat transfer listed here offers many advantages:Safe to use, non toxic, and generally odourless formulationsResistance to ageing and viscosity changes with low susceptibility to corrosion.Silicone oils (SIL).Non-flammable, with long operational life.Synthetic heat transfer fluids (Synth).Usually formulated from a hydrocarbon base with low viscosity within the recommended working temperature range.Viscosity.For optimal temperature stability the bath fluid must be of low viscosity.Fire point.Fluids can spontaneously ignite above a certain temperature. EN 61010 stipulates that the maximum working temperature of the liquid should be 25 °C below its' fire point.Heating up range.Prolonged use is not permitted as the self-heating effect within these liquids may cause the overtemperature protection system of the pump unit to operate and shut down the pump.Operating temperature range.Thermostats may only be operated for an extended time in this range under certain conditions. Viscosity must not exceed 30 mPas. Otherwise pumps will not achieve their stated performance figures.Working temperature range.The long-term use range for peak thermostatic bath performance. Maximum viscosity level is approx. 5 mPas.Bath liquids for thermostatic baths | Type: SIL 180, Capacity l: 5, Temp. range °C: -40 ... 200
€314,00
Bath liquids for thermostatic baths | Type: SIL 300, Capacity l: 10, Temp. range °C: 80 ... 300
Brand: Thermo Elect.LED GmbH (HaakeTCAvailable in 12 variantsBath liquids.Use of the appropriate liquids for heat transfer listed here offers many advantages:Safe to use, non toxic, and generally odourless formulationsResistance to ageing and viscosity changes with low susceptibility to corrosion.Silicone oils (SIL).Non-flammable, with long operational life.Synthetic heat transfer fluids (Synth).Usually formulated from a hydrocarbon base with low viscosity within the recommended working temperature range.Viscosity.For optimal temperature stability the bath fluid must be of low viscosity.Fire point.Fluids can spontaneously ignite above a certain temperature. EN 61010 stipulates that the maximum working temperature of the liquid should be 25 °C below its' fire point.Heating up range.Prolonged use is not permitted as the self-heating effect within these liquids may cause the overtemperature protection system of the pump unit to operate and shut down the pump.Operating temperature range.Thermostats may only be operated for an extended time in this range under certain conditions. Viscosity must not exceed 30 mPas. Otherwise pumps will not achieve their stated performance figures.Working temperature range.The long-term use range for peak thermostatic bath performance. Maximum viscosity level is approx. 5 mPas.Bath liquids for thermostatic baths | Type: SIL 300, Capacity l: 10, Temp. range °C: 80 ... 300
€1.476,00
Bath liquids for thermostatic baths | Type: SIL 300, Capacity l: 5, Temp. range °C: 80 ... 300
Brand: Thermo Elect.LED GmbH (HaakeTCAvailable in 12 variantsBath liquids.Use of the appropriate liquids for heat transfer listed here offers many advantages:Safe to use, non toxic, and generally odourless formulationsResistance to ageing and viscosity changes with low susceptibility to corrosion.Silicone oils (SIL).Non-flammable, with long operational life.Synthetic heat transfer fluids (Synth).Usually formulated from a hydrocarbon base with low viscosity within the recommended working temperature range.Viscosity.For optimal temperature stability the bath fluid must be of low viscosity.Fire point.Fluids can spontaneously ignite above a certain temperature. EN 61010 stipulates that the maximum working temperature of the liquid should be 25 °C below its' fire point.Heating up range.Prolonged use is not permitted as the self-heating effect within these liquids may cause the overtemperature protection system of the pump unit to operate and shut down the pump.Operating temperature range.Thermostats may only be operated for an extended time in this range under certain conditions. Viscosity must not exceed 30 mPas. Otherwise pumps will not achieve their stated performance figures.Working temperature range.The long-term use range for peak thermostatic bath performance. Maximum viscosity level is approx. 5 mPas.Bath liquids for thermostatic baths | Type: SIL 300, Capacity l: 5, Temp. range °C: 80 ... 300
€1.041,00
Bath liquids for thermostatic baths | Type: Synth 200, Capacity l: 10, Temp. range °C: 20 ... 210
Brand: Thermo Elect.LED GmbH (HaakeTCAvailable in 12 variantsBath liquids.Use of the appropriate liquids for heat transfer listed here offers many advantages:Safe to use, non toxic, and generally odourless formulationsResistance to ageing and viscosity changes with low susceptibility to corrosion.Silicone oils (SIL).Non-flammable, with long operational life.Synthetic heat transfer fluids (Synth).Usually formulated from a hydrocarbon base with low viscosity within the recommended working temperature range.Viscosity.For optimal temperature stability the bath fluid must be of low viscosity.Fire point.Fluids can spontaneously ignite above a certain temperature. EN 61010 stipulates that the maximum working temperature of the liquid should be 25 °C below its' fire point.Heating up range.Prolonged use is not permitted as the self-heating effect within these liquids may cause the overtemperature protection system of the pump unit to operate and shut down the pump.Operating temperature range.Thermostats may only be operated for an extended time in this range under certain conditions. Viscosity must not exceed 30 mPas. Otherwise pumps will not achieve their stated performance figures.Working temperature range.The long-term use range for peak thermostatic bath performance. Maximum viscosity level is approx. 5 mPas.Bath liquids for thermostatic baths | Type: Synth 200, Capacity l: 10, Temp. range °C: 20 ... 210
€903,00
Bath liquids for thermostatic baths | Type: Synth 200, Capacity l: 5, Temp. range °C: 20 ... 210
Brand: Thermo Elect.LED GmbH (HaakeTCAvailable in 12 variantsBath liquids.Use of the appropriate liquids for heat transfer listed here offers many advantages:Safe to use, non toxic, and generally odourless formulationsResistance to ageing and viscosity changes with low susceptibility to corrosion.Silicone oils (SIL).Non-flammable, with long operational life.Synthetic heat transfer fluids (Synth).Usually formulated from a hydrocarbon base with low viscosity within the recommended working temperature range.Viscosity.For optimal temperature stability the bath fluid must be of low viscosity.Fire point.Fluids can spontaneously ignite above a certain temperature. EN 61010 stipulates that the maximum working temperature of the liquid should be 25 °C below its' fire point.Heating up range.Prolonged use is not permitted as the self-heating effect within these liquids may cause the overtemperature protection system of the pump unit to operate and shut down the pump.Operating temperature range.Thermostats may only be operated for an extended time in this range under certain conditions. Viscosity must not exceed 30 mPas. Otherwise pumps will not achieve their stated performance figures.Working temperature range.The long-term use range for peak thermostatic bath performance. Maximum viscosity level is approx. 5 mPas.Bath liquids for thermostatic baths | Type: Synth 200, Capacity l: 5, Temp. range °C: 20 ... 210
€482,00
Bath liquids for thermostatic baths | Type: Synth 260, Capacity l: 10, Temp. range °C: 40 ... 250
Brand: Thermo Elect.LED GmbH (HaakeTCAvailable in 12 variantsBath liquids.Use of the appropriate liquids for heat transfer listed here offers many advantages:Safe to use, non toxic, and generally odourless formulationsResistance to ageing and viscosity changes with low susceptibility to corrosion.Silicone oils (SIL).Non-flammable, with long operational life.Synthetic heat transfer fluids (Synth).Usually formulated from a hydrocarbon base with low viscosity within the recommended working temperature range.Viscosity.For optimal temperature stability the bath fluid must be of low viscosity.Fire point.Fluids can spontaneously ignite above a certain temperature. EN 61010 stipulates that the maximum working temperature of the liquid should be 25 °C below its' fire point.Heating up range.Prolonged use is not permitted as the self-heating effect within these liquids may cause the overtemperature protection system of the pump unit to operate and shut down the pump.Operating temperature range.Thermostats may only be operated for an extended time in this range under certain conditions. Viscosity must not exceed 30 mPas. Otherwise pumps will not achieve their stated performance figures.Working temperature range.The long-term use range for peak thermostatic bath performance. Maximum viscosity level is approx. 5 mPas.Bath liquids for thermostatic baths | Type: Synth 260, Capacity l: 10, Temp. range °C: 40 ... 250
€521,00
Bath liquids for thermostatic baths | Type: Synth 260, Capacity l: 5, Temp. range °C: 40 ... 250
Brand: Thermo Elect.LED GmbH (HaakeTCAvailable in 12 variantsBath liquids.Use of the appropriate liquids for heat transfer listed here offers many advantages:Safe to use, non toxic, and generally odourless formulationsResistance to ageing and viscosity changes with low susceptibility to corrosion.Silicone oils (SIL).Non-flammable, with long operational life.Synthetic heat transfer fluids (Synth).Usually formulated from a hydrocarbon base with low viscosity within the recommended working temperature range.Viscosity.For optimal temperature stability the bath fluid must be of low viscosity.Fire point.Fluids can spontaneously ignite above a certain temperature. EN 61010 stipulates that the maximum working temperature of the liquid should be 25 °C below its' fire point.Heating up range.Prolonged use is not permitted as the self-heating effect within these liquids may cause the overtemperature protection system of the pump unit to operate and shut down the pump.Operating temperature range.Thermostats may only be operated for an extended time in this range under certain conditions. Viscosity must not exceed 30 mPas. Otherwise pumps will not achieve their stated performance figures.Working temperature range.The long-term use range for peak thermostatic bath performance. Maximum viscosity level is approx. 5 mPas.Bath liquids for thermostatic baths | Type: Synth 260, Capacity l: 5, Temp. range °C: 40 ... 250
€282,00
Bath liquids for thermostatic baths | Type: Synth 60, Capacity l: 10, Temp. range °C: -50 ...45
Brand: Thermo Elect.LED GmbH (HaakeTCAvailable in 12 variantsBath liquids.Use of the appropriate liquids for heat transfer listed here offers many advantages:Safe to use, non toxic, and generally odourless formulationsResistance to ageing and viscosity changes with low susceptibility to corrosion.Silicone oils (SIL).Non-flammable, with long operational life.Synthetic heat transfer fluids (Synth).Usually formulated from a hydrocarbon base with low viscosity within the recommended working temperature range.Viscosity.For optimal temperature stability the bath fluid must be of low viscosity.Fire point.Fluids can spontaneously ignite above a certain temperature. EN 61010 stipulates that the maximum working temperature of the liquid should be 25 °C below its' fire point.Heating up range.Prolonged use is not permitted as the self-heating effect within these liquids may cause the overtemperature protection system of the pump unit to operate and shut down the pump.Operating temperature range.Thermostats may only be operated for an extended time in this range under certain conditions. Viscosity must not exceed 30 mPas. Otherwise pumps will not achieve their stated performance figures.Working temperature range.The long-term use range for peak thermostatic bath performance. Maximum viscosity level is approx. 5 mPas.Bath liquids for thermostatic baths | Type: Synth 60, Capacity l: 10, Temp. range °C: -50 ...45
€470,00
Bath liquids for thermostatic baths | Type: Synth 60, Capacity l: 5, Temp. range °C: -50 ...45
Brand: Thermo Elect.LED GmbH (HaakeTCAvailable in 12 variantsBath liquids.Use of the appropriate liquids for heat transfer listed here offers many advantages:Safe to use, non toxic, and generally odourless formulationsResistance to ageing and viscosity changes with low susceptibility to corrosion.Silicone oils (SIL).Non-flammable, with long operational life.Synthetic heat transfer fluids (Synth).Usually formulated from a hydrocarbon base with low viscosity within the recommended working temperature range.Viscosity.For optimal temperature stability the bath fluid must be of low viscosity.Fire point.Fluids can spontaneously ignite above a certain temperature. EN 61010 stipulates that the maximum working temperature of the liquid should be 25 °C below its' fire point.Heating up range.Prolonged use is not permitted as the self-heating effect within these liquids may cause the overtemperature protection system of the pump unit to operate and shut down the pump.Operating temperature range.Thermostats may only be operated for an extended time in this range under certain conditions. Viscosity must not exceed 30 mPas. Otherwise pumps will not achieve their stated performance figures.Working temperature range.The long-term use range for peak thermostatic bath performance. Maximum viscosity level is approx. 5 mPas.Bath liquids for thermostatic baths | Type: Synth 60, Capacity l: 5, Temp. range °C: -50 ...45
€255,00
Copyright © 2024 - Achrom nv - BE 0445.025.508 | General terms | Cookiebeleid | Privacybeleid | Handcrafted by CrayonCru®