Accessories
Analytical balances
Moisture balances
Other balances
Pocket balances
Precision balances
Weights
Analytical balances
Moisture balances
Other balances
Pocket balances
Precision balances
Weights
Buffer solutions
Electrode accessories
Ion selective Electrodes
Paper, chopstick
pH-Electrodes
Portable devices
Redox-Electrodes
Table devices
Electrode accessories
Ion selective Electrodes
Paper, chopstick
pH-Electrodes
Portable devices
Redox-Electrodes
Table devices
Overalls, coats, jackets, trousers
Overshoes, overboots, socks
Surgical masks, beard covers, hoods, sleeves
Overshoes, overboots, socks
Surgical masks, beard covers, hoods, sleeves
Chairs and stools
Gowing benches
Mats and floor coverings
Tables, shelves, trolleys, dispensers
Wardrobes
Gowing benches
Mats and floor coverings
Tables, shelves, trolleys, dispensers
Wardrobes
Components for Extraction
Components for reaction and distillation
Distillation-Accessories
Dropping Funnels
Flasks with NS joint neck
Flat ground flange reaction vessels
Gas wash bottles
Ground joints, attachable
KPG stirrer and bearings
Laboratory reactors
NS joints accessories
Reflux condenser
Standard ground stoppers
Stopcocks and Valves
Tubing adapters
Components for reaction and distillation
Distillation-Accessories
Dropping Funnels
Flasks with NS joint neck
Flat ground flange reaction vessels
Gas wash bottles
Ground joints, attachable
KPG stirrer and bearings
Laboratory reactors
NS joints accessories
Reflux condenser
Standard ground stoppers
Stopcocks and Valves
Tubing adapters
Biobanking
Cryogenic accessories
Cryogenic boxes
Cryogenic racks
Cryogenic storage tanks
Cryogenic tubes
Dewar flasks
Ice machines
Liquid nitrogen-Accessories
Low and Ultra low temperature freezers
Refrigerators and Freezers
Refrigerators and Freezers ex protected
Transport boxes
Cryogenic accessories
Cryogenic boxes
Cryogenic racks
Cryogenic storage tanks
Cryogenic tubes
Dewar flasks
Ice machines
Liquid nitrogen-Accessories
Low and Ultra low temperature freezers
Refrigerators and Freezers
Refrigerators and Freezers ex protected
Transport boxes
Concentration
DNA and RNA isolation
DNA-Electrophoresis
Electroporation
Gel-Documentation
PCR
PCR cabinets
Thermocyclers
DNA and RNA isolation
DNA-Electrophoresis
Electroporation
Gel-Documentation
PCR
PCR cabinets
Thermocyclers
Accessories and reagents
Dissecting sets
Embedding cassettes
Microtoms
Scalpels
Tissue floating baths
Dissecting sets
Embedding cassettes
Microtoms
Scalpels
Tissue floating baths
Cold light sources
Counting chambers
Digital microscopes and cameras
Light microscopes
Microscopy accessories
Slide covers
Slide storage
Slides
Staining racks
Stereomicroscopes
Counting chambers
Digital microscopes and cameras
Light microscopes
Microscopy accessories
Slide covers
Slide storage
Slides
Staining racks
Stereomicroscopes
- 3M Deutschland GmbH
- Ahlstrom-Munksjö Germany GmbH
- AHN Biotechnologie GmbH
- Amcor Flexibles North
- AS Medizintechnik GmbH
- Azenta UK Ltd
- B.Braun (Aesculap)
- Bel-Art Products
- biostep
- BOCHEM Instrumente GmbH
- Bohemia Cristal
- BRAND GMBH + CO.KG
- C. Bruno Bayha GmbH
- Camping Gaz (Deutschland) GmbH
- Carl Friedrich Usbeck KG
- CHEM-LAB n.v.
- Cole-Parmer Ltd. (Electro)
- Cole-Parmer Ltd. (PCRmax)
- Cole-Parmer Ltd. (Stuart)
- Corning BV
- Crystal Technology &
- Curiosis Inc.
- Cytiva Europe GmbH
- Dr.Goos-Suprema GmbH
- DWK Life Sciences GmbH (Duran)
- DWK Life Sciences GmbH (Kimble)
- DWK Life Sciences Inc.(Wheaton
- DWK Life Sciences Limited
- Eppendorf SE
- Epredia Netherlands BV
- ESCO Lifesciences GmbH
- Faster S.r.l.
- Franz Mensch GmbH
- Funke- Dr. N. Gerber
- Glaswarenfabrik Karl Hecht
- GPE Scientific Limited
- Grant Instruments Ltd.
- Greiner Bio-One GmbH
- Guangzhou JET Bio-Filtration
- GVS Microfiltrazione SRL
- Hahnemühle FineArt GmbH
- Harvard Apparatus (BTX)
- Heathrow Scientific LLC
- Heinz Herenz
- Henke-Sass, Wolf GmbH
- Heraeus Noblelight GmbH
- Hettich Benelux B.V.
- Hirschmann Laborgeräte GmbH
- Hünersdorff GmbH
- IBI Scientific
- Ideal-tek S.A.
- interscience
- ISOLAB Laborgeräte GmbH
- Karl Hammacher GmbH
- Kartell S.p.A.
- Kleinfeld Labortechnik GmbH
- KLINIKA Medical GmbH
- Knauer GmbH
- Lauda Dr.R.Wobser GmbH & Co.KG
- LLG Labware
- Macherey-Nagel GmbH & Co. KG
- Micros Produktion und
- Millipore GmbH
- NanoEn Tek Inc.
- Nolato Treff AG
- Ohaus GmbH
- OMNILAB GmbH & Co. KG
- ORSAtec GmbH
- Paul Boettger GmbH & Co. KG
- Paul Marienfeld GmbH & Co. KG
- PolyScience
- QIAGEN GmbH
- Ratiolab GmbH
- Reagecon Diagnostics Ltd.
- Repligen Europe B.V.
- Ritter GmbH
- Roland Watzdorf GmbH
- Saint Gobain
- Sartorius Lab Instruments
- schuett-biotec GmbH
- Schülke & Mayr GmbH
- Scientific Industries, Inc.
- siehe 9400264 Thistle Scientif
- Sileks GmbH
- Simon Keller AG
- Sterilin Ltd.
- styro GmbH
- THARMAC GmbH
- Thermo Elect.LED GmbH (Kendro)
- Thermo Elect.LED GmbH (Matrix)
- Thermo Elect.LED GmbH (Nalge)
- Thermo Elect.LED GmbH (Nunc)
- Tintometer GmbH
- Vacuubrand GmbH & Co.KG
- Vilber Lourmat
- VITLAB GmbH
- Witeg Labortechnik GmbH
- WLD-TEC GmbH
- Württ. Drahtwarenfabrik
Accessories for hiflow vacuum aspirator system with pump | Description: Replacement filters for hiflow vacuum aspirator system
Brand: Bel-Art ProductsAccessories for hiflow vacuum aspirator system with pump | Description: Replacement filters for hiflow vacuum aspirator system
€153,22
Cell strainers Flowmi™ | Mesh size µm: 40
Brand: Bel-Art ProductsAvailable in 2 variantsScienceware® Flowmi™ Cell Strainers provide fast and efficient filtering of small volume samples (up to 1000µl) prior to FLOW or FACS analysis. Removes cell aggregates and creates uniform single cell suspensions.Flowmi™ fits most 1000 µl tipsCompact tray holds 50 Flowmi™ Cell StrainersSliding cover for easy, one-handed useSterile, packaged in a re-sealable bagCell strainers Flowmi™ | Mesh size µm: 40
€215,58
Cell strainers Flowmi™ | Mesh size µm: 70
Brand: Bel-Art ProductsAvailable in 2 variantsScienceware® Flowmi™ Cell Strainers provide fast and efficient filtering of small volume samples (up to 1000µl) prior to FLOW or FACS analysis. Removes cell aggregates and creates uniform single cell suspensions.Flowmi™ fits most 1000 µl tipsCompact tray holds 50 Flowmi™ Cell StrainersSliding cover for easy, one-handed useSterile, packaged in a re-sealable bagCell strainers Flowmi™ | Mesh size µm: 70
€212,78
Cloning cylinder, PS, sterile | Type: Assorted Cloning Cylinders: 4.7 mm I.D. x 8 mm H, 6.4 mm I.D. x 8 mm H and 9.5 mm I.D. x 11 mm H, 40 of each size
Brand: Bel-Art ProductsAvailable in 4 variantsThese cloning cylinders facilitate the isolation of individual cell clones, each generated from a single cell, yielding a homogenous population of cells. To isolate a clone, a thin layer of grease is applied to the bottom edge of the cylinder and then inverted over the clone of choice. After adding a small volume of Trypsin or EDTA, the dish is incubated at 37 ºC (98.6 ºF) briefly until cells detach. Cells are then collected from inside the cylinder and transferred to another vessel for further growth.Cylinders are tapered so bottom edge is wider than the top ensuring a good sealing surfacePolystyrene cloning cylinders are supplied in sterile packsThree sizes: 4.7 mm I.D. x 8 mm H, 6.4 mm I.D. x 8 mm H and 9.5 mm I.D. x 11 mm HPacked 10 per bag, one sizeCloning cylinder, PS, sterile | Type: Assorted Cloning Cylinders: 4.7 mm I.D. x 8 mm H, 6.4 mm I.D. x 8 mm H and 9.5 mm I.D. x 11 mm H, 40 of each size
€276,47
Cloning cylinder, PS, sterile | Type: Cloning Cylinders: 4.7 mm I.D. x 8 mm H
Brand: Bel-Art ProductsAvailable in 4 variantsThese cloning cylinders facilitate the isolation of individual cell clones, each generated from a single cell, yielding a homogenous population of cells. To isolate a clone, a thin layer of grease is applied to the bottom edge of the cylinder and then inverted over the clone of choice. After adding a small volume of Trypsin or EDTA, the dish is incubated at 37 ºC (98.6 ºF) briefly until cells detach. Cells are then collected from inside the cylinder and transferred to another vessel for further growth.Cylinders are tapered so bottom edge is wider than the top ensuring a good sealing surfacePolystyrene cloning cylinders are supplied in sterile packsThree sizes: 4.7 mm I.D. x 8 mm H, 6.4 mm I.D. x 8 mm H and 9.5 mm I.D. x 11 mm HPacked 10 per bag, one sizeCloning cylinder, PS, sterile | Type: Cloning Cylinders: 4.7 mm I.D. x 8 mm H
€136,01
Cloning cylinder, PS, sterile | Type: Cloning Cylinders: 6.4 mm I.D. x 8 mm H
Brand: Bel-Art ProductsAvailable in 4 variantsThese cloning cylinders facilitate the isolation of individual cell clones, each generated from a single cell, yielding a homogenous population of cells. To isolate a clone, a thin layer of grease is applied to the bottom edge of the cylinder and then inverted over the clone of choice. After adding a small volume of Trypsin or EDTA, the dish is incubated at 37 ºC (98.6 ºF) briefly until cells detach. Cells are then collected from inside the cylinder and transferred to another vessel for further growth.Cylinders are tapered so bottom edge is wider than the top ensuring a good sealing surfacePolystyrene cloning cylinders are supplied in sterile packsThree sizes: 4.7 mm I.D. x 8 mm H, 6.4 mm I.D. x 8 mm H and 9.5 mm I.D. x 11 mm HPacked 10 per bag, one sizeCloning cylinder, PS, sterile | Type: Cloning Cylinders: 6.4 mm I.D. x 8 mm H
€144,49
Cloning cylinder, PS, sterile | Type: Cloning Cylinders: 9.5 mm I.D. x 11 mm H
Brand: Bel-Art ProductsAvailable in 4 variantsThese cloning cylinders facilitate the isolation of individual cell clones, each generated from a single cell, yielding a homogenous population of cells. To isolate a clone, a thin layer of grease is applied to the bottom edge of the cylinder and then inverted over the clone of choice. After adding a small volume of Trypsin or EDTA, the dish is incubated at 37 ºC (98.6 ºF) briefly until cells detach. Cells are then collected from inside the cylinder and transferred to another vessel for further growth.Cylinders are tapered so bottom edge is wider than the top ensuring a good sealing surfacePolystyrene cloning cylinders are supplied in sterile packsThree sizes: 4.7 mm I.D. x 8 mm H, 6.4 mm I.D. x 8 mm H and 9.5 mm I.D. x 11 mm HPacked 10 per bag, one sizeCloning cylinder, PS, sterile | Type: Cloning Cylinders: 9.5 mm I.D. x 11 mm H
€186,97
Hiflow vacuum aspirator system with pump | Type: Hiflow vacuum aspirator system with pump
Brand: Bel-Art ProductsFor vacuum aspiration of liquids, including tissue culture media, supernatants, and chemical wastes.No external vacuum system requiredBuilt-in, maintenance free pump quickly and conveniently aspirates fluidsWith quick disconnects to allow easy removal, emptying and replacement of the bottleHeavy walled collection bottle made of chemical and corrosion-resistant polypropylenePump housing made of polypropyleneLid with safety release vent to prevent vacuum implosionReplaceable hydrophobic filter protects the pump motor from fluid contaminationCollection bottle, lid, tubing and connectors are autoclavable at 121°CHiflow vacuum aspirator system with pump | Type: Hiflow vacuum aspirator system with pump
€2.459,36
PCR-Tube Cryobox | Description: PCR-Tube Cryobox 144 x 0.2ml Tubes
Brand: Bel-Art ProductsDesigned to fit in a standard 53mm freezer rack, this 144-place PCR Tube Freezer Box will hold individual and/or strip 0.2ml PCR tubes.Designed for ULT freezer storage at temperatures down to -86°CDurable and impervious to moistureClear polycarbonate lid and base and alpha-numeric index make it easy to identify samples within the boxTwo boxes may be stacked to fit together in one space in a 53mm freezer storage rack if using flat-capped PCR tubesPCR-Tube Cryobox | Description: PCR-Tube Cryobox 144 x 0.2ml Tubes
€108,62
Racks for magnetic nanoparticle based separations | For: One 96-well PCR Tube Plate
Brand: Bel-Art ProductsAvailable in 5 variantsRack suitable for all magnetic separation experiments involving affinity ligands separation of e.g. antibodies and nucleic acids.Model for 1.5 / 2.0 ml, 5 ml / 15 ml and 50 ml tubesIndependent and rotatable sleeves with powerful magnets on 50 ml and 1.5/5 mlEasy removal of liquids96-well PCR plate model has 24 magnetsFlat bottom microplate model has magnets covering entire footprint to accept all standard micro-plates with any number of wells; 6, 12, 24, 48, 96 etc.Racks fit microplates following ANSI standardsClear acrylic allows unobstructed view of tube contentsRacks for magnetic nanoparticle based separations | For: One 96-well PCR Tube Plate
€937,31
Racks for magnetic nanoparticle based separations | For: One Standard Size Flat Microplate
Brand: Bel-Art ProductsAvailable in 5 variantsRack suitable for all magnetic separation experiments involving affinity ligands separation of e.g. antibodies and nucleic acids.Model for 1.5 / 2.0 ml, 5 ml / 15 ml and 50 ml tubesIndependent and rotatable sleeves with powerful magnets on 50 ml and 1.5/5 mlEasy removal of liquids96-well PCR plate model has 24 magnetsFlat bottom microplate model has magnets covering entire footprint to accept all standard micro-plates with any number of wells; 6, 12, 24, 48, 96 etc.Racks fit microplates following ANSI standardsClear acrylic allows unobstructed view of tube contentsRacks for magnetic nanoparticle based separations | For: One Standard Size Flat Microplate
€937,31
Racks for magnetic nanoparticle based separations | For: Six 5 or 15ml Tubes
Brand: Bel-Art ProductsAvailable in 5 variantsRack suitable for all magnetic separation experiments involving affinity ligands separation of e.g. antibodies and nucleic acids.Model for 1.5 / 2.0 ml, 5 ml / 15 ml and 50 ml tubesIndependent and rotatable sleeves with powerful magnets on 50 ml and 1.5/5 mlEasy removal of liquids96-well PCR plate model has 24 magnetsFlat bottom microplate model has magnets covering entire footprint to accept all standard micro-plates with any number of wells; 6, 12, 24, 48, 96 etc.Racks fit microplates following ANSI standardsClear acrylic allows unobstructed view of tube contentsRacks for magnetic nanoparticle based separations | For: Six 5 or 15ml Tubes
€826,50
Copyright © 2024 - Achrom nv - BE 0445.025.508 | General terms | Cookiebeleid | Privacybeleid | Handcrafted by CrayonCru®