Accessories
Analytical balances
Moisture balances
Other balances
Pocket balances
Precision balances
Weights
Analytical balances
Moisture balances
Other balances
Pocket balances
Precision balances
Weights
Buffer solutions
Electrode accessories
Ion selective Electrodes
Paper, chopstick
pH-Electrodes
Portable devices
Redox-Electrodes
Table devices
Electrode accessories
Ion selective Electrodes
Paper, chopstick
pH-Electrodes
Portable devices
Redox-Electrodes
Table devices
Overalls, coats, jackets, trousers
Overshoes, overboots, socks
Surgical masks, beard covers, hoods, sleeves
Overshoes, overboots, socks
Surgical masks, beard covers, hoods, sleeves
Chairs and stools
Gowing benches
Mats and floor coverings
Tables, shelves, trolleys, dispensers
Wardrobes
Gowing benches
Mats and floor coverings
Tables, shelves, trolleys, dispensers
Wardrobes
Components for Extraction
Components for reaction and distillation
Distillation-Accessories
Dropping Funnels
Flasks with NS joint neck
Flat ground flange reaction vessels
Gas wash bottles
Ground joints, attachable
KPG stirrer and bearings
Laboratory reactors
NS joints accessories
Reflux condenser
Standard ground stoppers
Stopcocks and Valves
Tubing adapters
Components for reaction and distillation
Distillation-Accessories
Dropping Funnels
Flasks with NS joint neck
Flat ground flange reaction vessels
Gas wash bottles
Ground joints, attachable
KPG stirrer and bearings
Laboratory reactors
NS joints accessories
Reflux condenser
Standard ground stoppers
Stopcocks and Valves
Tubing adapters
Biobanking
Cryogenic accessories
Cryogenic boxes
Cryogenic racks
Cryogenic storage tanks
Cryogenic tubes
Dewar flasks
Ice machines
Liquid nitrogen-Accessories
Low and Ultra low temperature freezers
Refrigerators and Freezers
Refrigerators and Freezers ex protected
Transport boxes
Cryogenic accessories
Cryogenic boxes
Cryogenic racks
Cryogenic storage tanks
Cryogenic tubes
Dewar flasks
Ice machines
Liquid nitrogen-Accessories
Low and Ultra low temperature freezers
Refrigerators and Freezers
Refrigerators and Freezers ex protected
Transport boxes
Concentration
DNA and RNA isolation
DNA-Electrophoresis
Electroporation
Gel-Documentation
PCR
PCR cabinets
Thermocyclers
DNA and RNA isolation
DNA-Electrophoresis
Electroporation
Gel-Documentation
PCR
PCR cabinets
Thermocyclers
Accessories and reagents
Dissecting sets
Embedding cassettes
Microtoms
Scalpels
Tissue floating baths
Dissecting sets
Embedding cassettes
Microtoms
Scalpels
Tissue floating baths
Cold light sources
Counting chambers
Digital microscopes and cameras
Light microscopes
Microscopy accessories
Slide covers
Slide storage
Slides
Staining racks
Stereomicroscopes
Counting chambers
Digital microscopes and cameras
Light microscopes
Microscopy accessories
Slide covers
Slide storage
Slides
Staining racks
Stereomicroscopes
- 2mag AG
- Apollo Herkenrath GmbH & Co.KG
- Argos Technologies, Inc.
- Behr Labor-Technik GmbH
- Bel-Art Products
- Bohlender GmbH
- BRAND GMBH + CO.KG
- Buddeberg GmbH
- Bürkle GmbH
- Cole-Parmer Ltd. (ET Stua)
- Cole-Parmer Ltd. (Stuart)
- Corning BV
- DWK Life Sciences Inc.(Wheaton
- Eder GmbH
- Edmund Bühler GmbH
- Eppendorf SE
- Grant Instruments Ltd.
- Heathrow Scientific LLC
- Heidolph Instruments
- IBI Scientific
- IKA-Werke GmbH & Co.KG
- Kartell S.p.A.
- Lauda Dr.R.Wobser GmbH & Co.KG
- LLG Labware
- Ohaus GmbH
- Phoenix Instrument GmbH
- schuett-biotec GmbH
- Scientific Industries, Inc.
- SHP Steriltechnik AG
- Thermo Elect.LED GmbH (H+P VM)
- Thermo Elect.LED GmbH (Kendro)
- Velp Scientifica SRL
- VITLAB GmbH
- Xylem Analytics Germany (SI)
Anchor stirring rotors, stainless steel | Ø agitator mm: 100, Ø agitator shaft mm: 10, Length mm: 500
Brand: Buddeberg GmbHAvailable in 2 variantsThe anchor-shape rotor creates a tangential flow and high shear forces between the vessel wall and stirring blades. This stirrer is especially suitable for medium to high viscosity fluids. Recommended for low speed operations.Anchor stirring rotors, stainless steel | Ø agitator mm: 100, Ø agitator shaft mm: 10, Length mm: 500
€159,00
Anchor stirring rotors, stainless steel | Ø agitator mm: 80, Ø agitator shaft mm: 10, Length mm: 500
Brand: Buddeberg GmbHAvailable in 2 variantsThe anchor-shape rotor creates a tangential flow and high shear forces between the vessel wall and stirring blades. This stirrer is especially suitable for medium to high viscosity fluids. Recommended for low speed operations.Anchor stirring rotors, stainless steel | Ø agitator mm: 80, Ø agitator shaft mm: 10, Length mm: 500
€153,00
BuddeMix Stirring System 1 - 4 | Type: BuddeMix 1, Ø agitator mm: 60, Ø agitator shaft mm: 10
Brand: Buddeberg GmbHAvailable in 6 variantsThis novel stirring system has been conceived to mix low viscosity fluids as well as highly viscous media at slow speeds. Its special design creates inherent dynamic currents to produce perfectly homogeneous mixing results in very little time. Additional components like baffles, bottom bearings, etc. are not needed.Advantages at a glance:suitable for low to highly viscous fluidsstirs media containing solids and fibres without any difficultygentle, low-shear stirring, due to slow stirring speedconstant product temperature, with no heating effectshort mixing times as the entire contents of the container are agitatedno air addition, no foamingno baffles requiredlow gear wear due to balanced forcesminimal power consumption thanks to low speeds and short operation timeseasy cleaningmaterial no. 1.4404Particularly for potentially explosive atmospheres:a single stirring zone, near to the container base, ensures easy mixing of settled residues, e.g. in flow-through mixing containersno baffles required, thus no additional sources of ignitionBuddeMix Stirring System 1 - 4 | Type: BuddeMix 1, Ø agitator mm: 60, Ø agitator shaft mm: 10
€273,00
BuddeMix Stirring System 1 - 4 | Type: BuddeMix 2, Ø agitator mm: 80, Ø agitator shaft mm: 10
Brand: Buddeberg GmbHAvailable in 6 variantsThis novel stirring system has been conceived to mix low viscosity fluids as well as highly viscous media at slow speeds. Its special design creates inherent dynamic currents to produce perfectly homogeneous mixing results in very little time. Additional components like baffles, bottom bearings, etc. are not needed.Advantages at a glance:suitable for low to highly viscous fluidsstirs media containing solids and fibres without any difficultygentle, low-shear stirring, due to slow stirring speedconstant product temperature, with no heating effectshort mixing times as the entire contents of the container are agitatedno air addition, no foamingno baffles requiredlow gear wear due to balanced forcesminimal power consumption thanks to low speeds and short operation timeseasy cleaningmaterial no. 1.4404Particularly for potentially explosive atmospheres:a single stirring zone, near to the container base, ensures easy mixing of settled residues, e.g. in flow-through mixing containersno baffles required, thus no additional sources of ignitionBuddeMix Stirring System 1 - 4 | Type: BuddeMix 2, Ø agitator mm: 80, Ø agitator shaft mm: 10
€287,00
BuddeMix Stirring System 1 - 4 | Type: BuddeMix 3, Ø agitator mm: 120, Ø agitator shaft mm: 10
Brand: Buddeberg GmbHAvailable in 6 variantsThis novel stirring system has been conceived to mix low viscosity fluids as well as highly viscous media at slow speeds. Its special design creates inherent dynamic currents to produce perfectly homogeneous mixing results in very little time. Additional components like baffles, bottom bearings, etc. are not needed.Advantages at a glance:suitable for low to highly viscous fluidsstirs media containing solids and fibres without any difficultygentle, low-shear stirring, due to slow stirring speedconstant product temperature, with no heating effectshort mixing times as the entire contents of the container are agitatedno air addition, no foamingno baffles requiredlow gear wear due to balanced forcesminimal power consumption thanks to low speeds and short operation timeseasy cleaningmaterial no. 1.4404Particularly for potentially explosive atmospheres:a single stirring zone, near to the container base, ensures easy mixing of settled residues, e.g. in flow-through mixing containersno baffles required, thus no additional sources of ignitionBuddeMix Stirring System 1 - 4 | Type: BuddeMix 3, Ø agitator mm: 120, Ø agitator shaft mm: 10
€298,00
BuddeMix Stirring System 1 - 4 | Type: BuddeMix 4, Ø agitator mm: 150, Ø agitator shaft mm: 10
Brand: Buddeberg GmbHAvailable in 6 variantsThis novel stirring system has been conceived to mix low viscosity fluids as well as highly viscous media at slow speeds. Its special design creates inherent dynamic currents to produce perfectly homogeneous mixing results in very little time. Additional components like baffles, bottom bearings, etc. are not needed.Advantages at a glance:suitable for low to highly viscous fluidsstirs media containing solids and fibres without any difficultygentle, low-shear stirring, due to slow stirring speedconstant product temperature, with no heating effectshort mixing times as the entire contents of the container are agitatedno air addition, no foamingno baffles requiredlow gear wear due to balanced forcesminimal power consumption thanks to low speeds and short operation timeseasy cleaningmaterial no. 1.4404Particularly for potentially explosive atmospheres:a single stirring zone, near to the container base, ensures easy mixing of settled residues, e.g. in flow-through mixing containersno baffles required, thus no additional sources of ignitionBuddeMix Stirring System 1 - 4 | Type: BuddeMix 4, Ø agitator mm: 150, Ø agitator shaft mm: 10
€374,00
BuddeMix Stirring System 1 - 4 | Type: BuddeMix Mini 30, Ø agitator mm: 35, Ø agitator shaft mm: 8
Brand: Buddeberg GmbHAvailable in 6 variantsThis novel stirring system has been conceived to mix low viscosity fluids as well as highly viscous media at slow speeds. Its special design creates inherent dynamic currents to produce perfectly homogeneous mixing results in very little time. Additional components like baffles, bottom bearings, etc. are not needed.Advantages at a glance:suitable for low to highly viscous fluidsstirs media containing solids and fibres without any difficultygentle, low-shear stirring, due to slow stirring speedconstant product temperature, with no heating effectshort mixing times as the entire contents of the container are agitatedno air addition, no foamingno baffles requiredlow gear wear due to balanced forcesminimal power consumption thanks to low speeds and short operation timeseasy cleaningmaterial no. 1.4404Particularly for potentially explosive atmospheres:a single stirring zone, near to the container base, ensures easy mixing of settled residues, e.g. in flow-through mixing containersno baffles required, thus no additional sources of ignitionBuddeMix Stirring System 1 - 4 | Type: BuddeMix Mini 30, Ø agitator mm: 35, Ø agitator shaft mm: 8
€248,00
BuddeMix Stirring System 1 - 4 | Type: BuddeMix Mini 40, Ø agitator mm: 46, Ø agitator shaft mm: 8
Brand: Buddeberg GmbHAvailable in 6 variantsThis novel stirring system has been conceived to mix low viscosity fluids as well as highly viscous media at slow speeds. Its special design creates inherent dynamic currents to produce perfectly homogeneous mixing results in very little time. Additional components like baffles, bottom bearings, etc. are not needed.Advantages at a glance:suitable for low to highly viscous fluidsstirs media containing solids and fibres without any difficultygentle, low-shear stirring, due to slow stirring speedconstant product temperature, with no heating effectshort mixing times as the entire contents of the container are agitatedno air addition, no foamingno baffles requiredlow gear wear due to balanced forcesminimal power consumption thanks to low speeds and short operation timeseasy cleaningmaterial no. 1.4404Particularly for potentially explosive atmospheres:a single stirring zone, near to the container base, ensures easy mixing of settled residues, e.g. in flow-through mixing containersno baffles required, thus no additional sources of ignitionBuddeMix Stirring System 1 - 4 | Type: BuddeMix Mini 40, Ø agitator mm: 46, Ø agitator shaft mm: 8
€254,00
Clamp holder SP | Description: Belt length 150 cm
Brand: Buddeberg GmbHWith bosshead KR 260 for container diam.Clamp holder SP | Description: Belt length 150 cm
€252,00
Compressed air industrial stirrers BSR 64 with floor stand | Type: BSR 64/160-A-V, Capacity max. litres: 200, Off-load speed rpm.: 1600
Brand: Buddeberg GmbHAvailable in 3 variantsBSR series stirrers perform routine mixing tasks up to 200 l.General specifications:operating pressure max. 6 barair consumption 800 l/min. at 6 barpower output 640 W at 6 barclockwise rotationATEX rating to Ex II 2G Ex h IIC T5 GbBasic models include:all-stainless steel housingcontinuously adjustable speed control valvespherical clamping device with support arm diam. 16 mm, length 200 mmfloor stand with rod (height 1000 mm, width 600 mm) and bossheadplug-in connector DN 7.8silenceroutput shaft L 32 mm x diam. 14 mmCompressed air industrial stirrers BSR 64 with floor stand | Type: BSR 64/160-A-V, Capacity max. litres: 200, Off-load speed rpm.: 1600
€3.385,00
Compressed air industrial stirrers BSR 64 with floor stand | Type: BSR 64/30-A-V, Capacity max. litres: 200, Off-load speed rpm.: 300
Brand: Buddeberg GmbHAvailable in 3 variantsBSR series stirrers perform routine mixing tasks up to 200 l.General specifications:operating pressure max. 6 barair consumption 800 l/min. at 6 barpower output 640 W at 6 barclockwise rotationATEX rating to Ex II 2G Ex h IIC T5 GbBasic models include:all-stainless steel housingcontinuously adjustable speed control valvespherical clamping device with support arm diam. 16 mm, length 200 mmfloor stand with rod (height 1000 mm, width 600 mm) and bossheadplug-in connector DN 7.8silenceroutput shaft L 32 mm x diam. 14 mmCompressed air industrial stirrers BSR 64 with floor stand | Type: BSR 64/30-A-V, Capacity max. litres: 200, Off-load speed rpm.: 300
€3.752,00
Compressed air industrial stirrers BSR 64 with floor stand | Type: BSR 64/65-A-V, Capacity max. litres: 200, Off-load speed rpm.: 650
Brand: Buddeberg GmbHAvailable in 3 variantsBSR series stirrers perform routine mixing tasks up to 200 l.General specifications:operating pressure max. 6 barair consumption 800 l/min. at 6 barpower output 640 W at 6 barclockwise rotationATEX rating to Ex II 2G Ex h IIC T5 GbBasic models include:all-stainless steel housingcontinuously adjustable speed control valvespherical clamping device with support arm diam. 16 mm, length 200 mmfloor stand with rod (height 1000 mm, width 600 mm) and bossheadplug-in connector DN 7.8silenceroutput shaft L 32 mm x diam. 14 mmCompressed air industrial stirrers BSR 64 with floor stand | Type: BSR 64/65-A-V, Capacity max. litres: 200, Off-load speed rpm.: 650
€3.752,00
Copyright © 2024 - Achrom nv - BE 0445.025.508 | General terms | Cookiebeleid | Privacybeleid | Handcrafted by CrayonCru®