Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

KINEMATICA GmbH
789101112
Dispersing vessels POLYTRON® GS | Type: GS 25K, Volume ml: 150, Ø mm: 54
Dispersing vessels POLYTRON® GS | Type: GS 25K, Volume ml: 150, Ø mm: 54
Brand: KINEMATICA GmbHAvailable in 15 variantsGS vessels for homogenisers POLYTRON® are available in borosilicate glass or stainless steel. GS jars have a cloverleaf-like shape creating high turbulences optimizing the mixing and the dispersing efficiency. This minimizes the machining time and reducing the application of energy.The GS-stainless steel containers with lid are equipped with baffles. The crossbars radically disturb the flow and generate additional opposing flows, optimizing the mixing in the dispensing vessel. The sterilisable screw caps with PTFE or a silicone seal are temperature-resistant up to 180 °C. The stainless steel 18/10 is rustproof, durable, has good insulating properties, completely hygienic, not toxic and not magnetic.
€178,00
Dispersing vessels POLYTRON® GS | Type: GS 40, Volume ml: 500, Ø mm: 80
Dispersing vessels POLYTRON® GS | Type: GS 40, Volume ml: 500, Ø mm: 80
Brand: KINEMATICA GmbHAvailable in 15 variantsGS vessels for homogenisers POLYTRON® are available in borosilicate glass or stainless steel. GS jars have a cloverleaf-like shape creating high turbulences optimizing the mixing and the dispersing efficiency. This minimizes the machining time and reducing the application of energy.The GS-stainless steel containers with lid are equipped with baffles. The crossbars radically disturb the flow and generate additional opposing flows, optimizing the mixing in the dispensing vessel. The sterilisable screw caps with PTFE or a silicone seal are temperature-resistant up to 180 °C. The stainless steel 18/10 is rustproof, durable, has good insulating properties, completely hygienic, not toxic and not magnetic.
€112,00
Dispersing vessels POLYTRON® GS | Type: GS 40K, Volume ml: 500, Ø mm: 80
Dispersing vessels POLYTRON® GS | Type: GS 40K, Volume ml: 500, Ø mm: 80
Brand: KINEMATICA GmbHAvailable in 15 variantsGS vessels for homogenisers POLYTRON® are available in borosilicate glass or stainless steel. GS jars have a cloverleaf-like shape creating high turbulences optimizing the mixing and the dispersing efficiency. This minimizes the machining time and reducing the application of energy.The GS-stainless steel containers with lid are equipped with baffles. The crossbars radically disturb the flow and generate additional opposing flows, optimizing the mixing in the dispensing vessel. The sterilisable screw caps with PTFE or a silicone seal are temperature-resistant up to 180 °C. The stainless steel 18/10 is rustproof, durable, has good insulating properties, completely hygienic, not toxic and not magnetic.
€260,00
Dispersing vessels POLYTRON® GS | Type: GS 50, Volume ml: 1000, Ø mm: 90
Dispersing vessels POLYTRON® GS | Type: GS 50, Volume ml: 1000, Ø mm: 90
Brand: KINEMATICA GmbHAvailable in 15 variantsGS vessels for homogenisers POLYTRON® are available in borosilicate glass or stainless steel. GS jars have a cloverleaf-like shape creating high turbulences optimizing the mixing and the dispersing efficiency. This minimizes the machining time and reducing the application of energy.The GS-stainless steel containers with lid are equipped with baffles. The crossbars radically disturb the flow and generate additional opposing flows, optimizing the mixing in the dispensing vessel. The sterilisable screw caps with PTFE or a silicone seal are temperature-resistant up to 180 °C. The stainless steel 18/10 is rustproof, durable, has good insulating properties, completely hygienic, not toxic and not magnetic.
€134,00
Dispersing vessels POLYTRON® GS | Type: GS 50K, Volume ml: 1000, Ø mm: 90
Dispersing vessels POLYTRON® GS | Type: GS 50K, Volume ml: 1000, Ø mm: 90
Brand: KINEMATICA GmbHAvailable in 15 variantsGS vessels for homogenisers POLYTRON® are available in borosilicate glass or stainless steel. GS jars have a cloverleaf-like shape creating high turbulences optimizing the mixing and the dispersing efficiency. This minimizes the machining time and reducing the application of energy.The GS-stainless steel containers with lid are equipped with baffles. The crossbars radically disturb the flow and generate additional opposing flows, optimizing the mixing in the dispensing vessel. The sterilisable screw caps with PTFE or a silicone seal are temperature-resistant up to 180 °C. The stainless steel 18/10 is rustproof, durable, has good insulating properties, completely hygienic, not toxic and not magnetic.
€326,00
Dispesing aggregate PT-DA 12/2WMEC-E157
Dispesing aggregate PT-DA 12/2WMEC-E157
€2.085,00
Dispesing aggregate PT-DA 20/2G-E210 Ø 20 mm
Dispesing aggregate PT-DA 20/2G-E210 Ø 20 mm
€2.919,00
Dry Mill POLYMIX® PX-MFC 90 D | Type: POLYMIX® PX-MFC 90 D, With: Blade grinding attachment, Min. speed rpm: 50
Dry Mill POLYMIX® PX-MFC 90 D | Type: POLYMIX® PX-MFC 90 D, With: Blade grinding attachment, Min. speed rpm: 50
Brand: KINEMATICA GmbHAvailable in 6 variantsThe PX-MFC 90 D is suitable for dry sample grinding in the laboratory. It's possible to change the hammer and cutting mill sets.The blade grinding attachment is used for processing of dried, stringy and fibrous and grease-free materials. Application: Wood, straw, dried grease-free meat, leather, paper, carbon, synthetics etc.The hammer grinding attachment is used for processing of dried, brittle and grease-free materials. Application: Dried grain, dried beans, bones, rock, ceramics etc.Sieves 0.2mm up to 6mm diameterSafety system prevents start when lid is openPowerful three-phase motorMilling chamber with interchangeable insertsLED displayWorking volume of 300 ml (Funnel volume)1000 Watt, 3-phase motor provides a low noise level during operation, with 230 Volt connectionSieves from 0.2 to 6 mm mesh sizeIntegrated speed control with LED display for speed and status messagesSpeeds from 50 to 6,000 rpm for maximum grinding efficiencyThe motor cannot be operated when the chamber door is openIntegrated overheating, overload and rotor blocking protectionSafety stopper for certain grinding materialsScope of supply: Mill with Hammer or Cutting Mill sets, 2 mm sieve, tool set, wooden stand with 12 collection tubes
€8.047,00
Dry Mill POLYMIX® PX-MFC 90 D | Type: POLYMIX® PX-MFC 90 D, With: Blade grinding attachment, Min. speed rpm: 50
Dry Mill POLYMIX® PX-MFC 90 D | Type: POLYMIX® PX-MFC 90 D, With: Blade grinding attachment, Min. speed rpm: 50
Brand: KINEMATICA GmbHAvailable in 6 variantsThe PX-MFC 90 D is suitable for dry sample grinding in the laboratory. It's possible to change the hammer and cutting mill sets.The blade grinding attachment is used for processing of dried, stringy and fibrous and grease-free materials. Application: Wood, straw, dried grease-free meat, leather, paper, carbon, synthetics etc.The hammer grinding attachment is used for processing of dried, brittle and grease-free materials. Application: Dried grain, dried beans, bones, rock, ceramics etc.Sieves 0.2mm up to 6mm diameterSafety system prevents start when lid is openPowerful three-phase motorMilling chamber with interchangeable insertsLED displayWorking volume of 300 ml (Funnel volume)1000 Watt, 3-phase motor provides a low noise level during operation, with 230 Volt connectionSieves from 0.2 to 6 mm mesh sizeIntegrated speed control with LED display for speed and status messagesSpeeds from 50 to 6,000 rpm for maximum grinding efficiencyThe motor cannot be operated when the chamber door is openIntegrated overheating, overload and rotor blocking protectionSafety stopper for certain grinding materialsScope of supply: Mill with Hammer or Cutting Mill sets, 2 mm sieve, tool set, wooden stand with 12 collection tubes
€8.047,00
Dry Mill POLYMIX® PX-MFC 90 D | Type: POLYMIX® PX-MFC 90 D, With: Blade grinding attachment, Min. speed rpm: 50
Dry Mill POLYMIX® PX-MFC 90 D | Type: POLYMIX® PX-MFC 90 D, With: Blade grinding attachment, Min. speed rpm: 50
Brand: KINEMATICA GmbHAvailable in 6 variantsThe PX-MFC 90 D is suitable for dry sample grinding in the laboratory. It's possible to change the hammer and cutting mill sets.The blade grinding attachment is used for processing of dried, stringy and fibrous and grease-free materials. Application: Wood, straw, dried grease-free meat, leather, paper, carbon, synthetics etc.The hammer grinding attachment is used for processing of dried, brittle and grease-free materials. Application: Dried grain, dried beans, bones, rock, ceramics etc.Sieves 0.2mm up to 6mm diameterSafety system prevents start when lid is openPowerful three-phase motorMilling chamber with interchangeable insertsLED displayWorking volume of 300 ml (Funnel volume)1000 Watt, 3-phase motor provides a low noise level during operation, with 230 Volt connectionSieves from 0.2 to 6 mm mesh sizeIntegrated speed control with LED display for speed and status messagesSpeeds from 50 to 6,000 rpm for maximum grinding efficiencyThe motor cannot be operated when the chamber door is openIntegrated overheating, overload and rotor blocking protectionSafety stopper for certain grinding materialsScope of supply: Mill with Hammer or Cutting Mill sets, 2 mm sieve, tool set, wooden stand with 12 collection tubes
€8.047,00
Dry Mill POLYMIX® PX-MFC 90 D | Type: POLYMIX® PX-MFC 90 D, With: Hammer grinding attachment, Min. speed rpm: 50
Dry Mill POLYMIX® PX-MFC 90 D | Type: POLYMIX® PX-MFC 90 D, With: Hammer grinding attachment, Min. speed rpm: 50
Brand: KINEMATICA GmbHAvailable in 6 variantsThe PX-MFC 90 D is suitable for dry sample grinding in the laboratory. It's possible to change the hammer and cutting mill sets.The blade grinding attachment is used for processing of dried, stringy and fibrous and grease-free materials. Application: Wood, straw, dried grease-free meat, leather, paper, carbon, synthetics etc.The hammer grinding attachment is used for processing of dried, brittle and grease-free materials. Application: Dried grain, dried beans, bones, rock, ceramics etc.Sieves 0.2mm up to 6mm diameterSafety system prevents start when lid is openPowerful three-phase motorMilling chamber with interchangeable insertsLED displayWorking volume of 300 ml (Funnel volume)1000 Watt, 3-phase motor provides a low noise level during operation, with 230 Volt connectionSieves from 0.2 to 6 mm mesh sizeIntegrated speed control with LED display for speed and status messagesSpeeds from 50 to 6,000 rpm for maximum grinding efficiencyThe motor cannot be operated when the chamber door is openIntegrated overheating, overload and rotor blocking protectionSafety stopper for certain grinding materialsScope of supply: Mill with Hammer or Cutting Mill sets, 2 mm sieve, tool set, wooden stand with 12 collection tubes
€7.623,00
Dry Mill POLYMIX® PX-MFC 90 D | Type: POLYMIX® PX-MFC 90 D, With: Hammer grinding attachment, Min. speed rpm: 50
Dry Mill POLYMIX® PX-MFC 90 D | Type: POLYMIX® PX-MFC 90 D, With: Hammer grinding attachment, Min. speed rpm: 50
Brand: KINEMATICA GmbHAvailable in 6 variantsThe PX-MFC 90 D is suitable for dry sample grinding in the laboratory. It's possible to change the hammer and cutting mill sets.The blade grinding attachment is used for processing of dried, stringy and fibrous and grease-free materials. Application: Wood, straw, dried grease-free meat, leather, paper, carbon, synthetics etc.The hammer grinding attachment is used for processing of dried, brittle and grease-free materials. Application: Dried grain, dried beans, bones, rock, ceramics etc.Sieves 0.2mm up to 6mm diameterSafety system prevents start when lid is openPowerful three-phase motorMilling chamber with interchangeable insertsLED displayWorking volume of 300 ml (Funnel volume)1000 Watt, 3-phase motor provides a low noise level during operation, with 230 Volt connectionSieves from 0.2 to 6 mm mesh sizeIntegrated speed control with LED display for speed and status messagesSpeeds from 50 to 6,000 rpm for maximum grinding efficiencyThe motor cannot be operated when the chamber door is openIntegrated overheating, overload and rotor blocking protectionSafety stopper for certain grinding materialsScope of supply: Mill with Hammer or Cutting Mill sets, 2 mm sieve, tool set, wooden stand with 12 collection tubes
€7.623,00
789101112

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.