Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

8910111213
Volumetric flasks, PFA, class A, with screw cap | Nominal capacity: 10 ml, Tolerance: ±0.04 ml, Height: 90 mm
Volumetric flasks, PFA, class A, with screw cap | Nominal capacity: 10 ml, Tolerance: ±0.04 ml, Height: 90 mm
Brand: BRAND GMBH + CO.KGAvailable in 6 variantsExposure to temperatures up to 121°C (autoclaving) will not cause tolerance limits to be exceeded ! Cleaning up to max. 60°C is recommended to preserve graduation marks and inscriptions. Tolerances according to class ADIN EN ISO 5215Incl. one batch certificateDE-M markingCalibrated to contain (TC, In)PFA screw cap with moulded sealing ringAutoclavable
€155,90
Volumetric flasks, plastic, Class B | Nominal capacity: 100 ml, Tolerance: 0,20 ± ml, Height: 180 mm
Volumetric flasks, plastic, Class B | Nominal capacity: 100 ml, Tolerance: 0,20 ± ml, Height: 180 mm
Brand: VITLAB GmbHAvailable in 7 variantsHighly transparent PMP. Tolarances Class B acc. to DIN EN ISO 1042. With individually adjusted, red printed graduation and inscriptions and PP standard ground joint stoppers.The volumetric flasks withstand exposure to temperatures up to 121°C (autoclaving) without permanent loss of tolerance. Recommended cleaning temperature: up to 60°C to preserve printing on the flasks.
€14,84
15%
Volumetric flasks, plastic, class B, PE NS-stoppers | Nominal capacity: 50 ml, Tolerance: 0,12 ± ml
Volumetric flasks, plastic, class B, PE NS-stoppers | Nominal capacity: 50 ml, Tolerance: 0,12 ± ml
Brand: ISOLAB Laborgeräte GmbHAvailable in 6 variantsTo DIN EN ISO 1042, adjusted to IN, with PE standard ground joint stoppers.
€6,40
€5,44
Volumetric flasks, PMP, class A | Nominal capacity: 25 ml, Tolerance: 0,04 ± ml, Height: 115 mm
Volumetric flasks, PMP, class A | Nominal capacity: 25 ml, Tolerance: 0,04 ± ml, Height: 115 mm
Brand: VITLAB GmbHAvailable in 7 variantsWith NS stoppers, PP. Highly transparent. With ring mark individually calibrated to (IN). Class A tolerances according to DIN EN ISO 1042. With printed lot number and batch certificate. Thermal stress up to 121ºC (autoclaving) does not permanently exceed the tolerance limit. To preserve markings, do not clean at temperatures exceeding 60ºC. On request also with DAKKS calibration certificate or single certificate.
€11,99
Volumetric Flasks, PMP, Class B, with PP Screw Cap | Nominal capacity: 50 ml, Tolerance: 0,12 ± ml, Height: 150 mm
Volumetric Flasks, PMP, Class B, with PP Screw Cap | Nominal capacity: 50 ml, Tolerance: 0,12 ± ml, Height: 150 mm
Brand: VITLAB GmbHAvailable in 7 variantsVolumetric flasks made of polymethylpentene. Highly transparent. Calibrated to contain (IN). DIN EN ISO 1042. Thermal stress up to 121ºC (autoclaving) does not permanently exceed the tolerance limit. To preserve markings, do not clean at temperatures exceeding 60ºC.
€12,15
Volumetric flasks, PP, Class B, NS-stoppers PP | Nominal capacity: 100 ml, Tolerance: 0,20 ± ml, Height: 180 mm
Volumetric flasks, PP, Class B, NS-stoppers PP | Nominal capacity: 100 ml, Tolerance: 0,20 ± ml, Height: 180 mm
Brand: VITLAB GmbHAvailable in 7 variantsAjusted to IN. Highly transparent. Class B tolerances according to DIN EN ISO 1042. Thermal stress up to 60 °C does not permanently exceed the tolerance limits. To preserve markings, do not clean at temperatures exceeding 60 °C.
€12,30
Volumetric Flasks, PP, Class B, with Screw Cap, PP | Nominal capacity: 1000 ml, Tolerance: 0,80 ± ml, Height: 310 mm
Volumetric Flasks, PP, Class B, with Screw Cap, PP | Nominal capacity: 1000 ml, Tolerance: 0,80 ± ml, Height: 310 mm
Brand: VITLAB GmbHAvailable in 6 variantsHighly transparent. Class B tolerances according to DIN EN ISO 1042. Calibrated to IN. Do not clean at temperatures exceeding 60 ºC. Thermal stress up to 60 ° C cause no permanently exceed of the tolerance limit.
€17,21
Volumetric flasks, Volac FORTUNA®, class A, blue graduated | Nominal capacity: 100 ml, Tolerance: 0,08 ± ml
Volumetric flasks, Volac FORTUNA®, class A, blue graduated | Nominal capacity: 100 ml, Tolerance: 0,08 ± ml
Brand: Poulten & Graf GmbHAvailable in 10 variantsVolumetric flasks, Volac FORTUNA®, USP, with blue graduation. Individually serial-numbered and comply with the accuracies of the USP/ISO/DIN-norms, with single certificate.
€15,46
Volumetric trapezoidal flasks, boro 3.3, class A, blue graduations | Nominal capacity: 2 ml, Tolerance: ±0.025 ml
Volumetric trapezoidal flasks, boro 3.3, class A, blue graduations | Nominal capacity: 2 ml, Tolerance: ±0.025 ml
Brand: BRAND GMBH + CO.KGAvailable in 7 variantsAll Blaubrand® volumetric flasks are delivered with batch number and one batch certificate included per pack. Also available with individual works or DAkkS calibration certificate, please enquire.DIN EN ISO 1042DE-M markingGraduations and inscriptions in highly contrasting blue enamelCalibrated to contain (IN)With PP stoppers
€45,80
Volumetric trapezoidal flasks, boro 3.3, class A, blue graduations, incl. ISO individual certificate | Nominal capacity: 10 ml, Tolerance: ±0.04 ml
Volumetric trapezoidal flasks, boro 3.3, class A, blue graduations, incl. ISO individual certificate | Nominal capacity: 10 ml, Tolerance: ±0.04 ml
Brand: BRAND GMBH + CO.KGAvailable in 7 variantsAll Blaubrand® volumetric flasks are delivered with batch number and one batch certificate included per pack. Also available with DAkkS calibration certificate, please enquire.DIN EN ISO 1042DE-M markingGraduations and inscriptions in highly contrasting blue enamelCalibrated to contain (IN)With PP stoppers
€46,15
Volumetric trapezoidal flasks, Borosilicate glass 3.3, class A, blue graduated | Nominal capacity: 3 ml
Volumetric trapezoidal flasks, Borosilicate glass 3.3, class A, blue graduated | Nominal capacity: 3 ml
Brand: ISOLAB Laborgeräte GmbHAvailable in 9 variantsConformity certified, with batch certificateDIN EN ISO 1042With NS and PE stoppers
€16,80
Volumetric trapezoidal flasks, borosilicate glass 3.3, class A, blue graduations | Nominal capacity: 5 ml, Tolerance: 0,025 ± ml
Volumetric trapezoidal flasks, borosilicate glass 3.3, class A, blue graduations | Nominal capacity: 5 ml, Tolerance: 0,025 ± ml
Brand: BRAND GMBH + CO.KGAll Blaubrand® volumetric flasks are delivered with batch number and one batch certificate included per pack. Also available with individual works or DAkkS calibration certificate, please enquire. Blaubrand® volumetric flasks (except wide-neck flasks). Individual and batch works, USP calibration certificates are also available on request. Models with glass stoppers available on request. The batch certificate is also available to download from the supplier's website.DIN EN ISO 1042DE-M markingGraduations and inscriptions in highly contrasting blue enamelCalibrated to contain (IN)
€17,15
8910111213

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.