Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

Behr Labor-Technik GmbH
121314151617
Laboratory purification plants to determine the biodegradability, according to DIN 38412 | Type: KLD 4, Description: Laboratory purification plant, complete, with dentrification step
Laboratory purification plants to determine the biodegradability, according to DIN 38412 | Type: KLD 4, Description: Laboratory purification plant, complete, with dentrification step
Brand: Behr Labor-Technik GmbHAvailable in 6 variantse.g. for the Coupled Units Test in acc. with OECD 303 A, complete.optional:Dentrification step with pump and stirrersOxygen control, consisting of:Oxygen measuring unit for preliminary sedimentation with a voltage output for switching the air supply on and off behrotest® GWS 200 limit switch. Operating capacity 0 to 200%, corresponds to 0 to 19.9 mg/l Vessels made of borosilicate glass 3.3Other laboratory purification plants on request.
€8.824,94
Laboratory purification plants to determine the biodegradability, according to DIN 38412 | Type: KLD 4/N, Description: Like KLD 4, with continual sludge recirculation
Laboratory purification plants to determine the biodegradability, according to DIN 38412 | Type: KLD 4/N, Description: Like KLD 4, with continual sludge recirculation
Brand: Behr Labor-Technik GmbHAvailable in 6 variantse.g. for the Coupled Units Test in acc. with OECD 303 A, complete.optional:Dentrification step with pump and stirrersOxygen control, consisting of:Oxygen measuring unit for preliminary sedimentation with a voltage output for switching the air supply on and off behrotest® GWS 200 limit switch. Operating capacity 0 to 200%, corresponds to 0 to 19.9 mg/l Vessels made of borosilicate glass 3.3Other laboratory purification plants on request.
€9.688,94
Laboratory purification plants to determine the biodegradability, according to DIN 38412 | Type: KLD 4/SR, Description: Laboratory purification plant, complete, with dentrification step and oxygen entry control
Laboratory purification plants to determine the biodegradability, according to DIN 38412 | Type: KLD 4/SR, Description: Laboratory purification plant, complete, with dentrification step and oxygen entry control
Brand: Behr Labor-Technik GmbHAvailable in 6 variantse.g. for the Coupled Units Test in acc. with OECD 303 A, complete.optional:Dentrification step with pump and stirrersOxygen control, consisting of:Oxygen measuring unit for preliminary sedimentation with a voltage output for switching the air supply on and off behrotest® GWS 200 limit switch. Operating capacity 0 to 200%, corresponds to 0 to 19.9 mg/l Vessels made of borosilicate glass 3.3Other laboratory purification plants on request.
€10.962,94
Laboratory purification plants to determine the biodegradability, according to DIN 38412 | Type: KLD 4N/SR, Description: Like KLD 4/SR, with continual sludge recirculation
Laboratory purification plants to determine the biodegradability, according to DIN 38412 | Type: KLD 4N/SR, Description: Like KLD 4/SR, with continual sludge recirculation
Brand: Behr Labor-Technik GmbHAvailable in 6 variantse.g. for the Coupled Units Test in acc. with OECD 303 A, complete.optional:Dentrification step with pump and stirrersOxygen control, consisting of:Oxygen measuring unit for preliminary sedimentation with a voltage output for switching the air supply on and off behrotest® GWS 200 limit switch. Operating capacity 0 to 200%, corresponds to 0 to 19.9 mg/l Vessels made of borosilicate glass 3.3Other laboratory purification plants on request.
€12.252,94
Micro Kjeldahl block digestion systems K 16, K 24 and K 40 | Type : K 16, Description : with 16 sample slots, for digestion vesselswith a volume of 100 ml
Micro Kjeldahl block digestion systems K 16, K 24 and K 40 | Type : K 16, Description : with 16 sample slots, for digestion vesselswith a volume of 100 ml
Brand: Behr Labor-Technik GmbHAvailable in 3 variantsBlock digestion systems with high-quality corrosion-resistant block housing made of stainless steel. With 16, 24 or 40 sample slots for micro Kjeldahl digestion vessels with a volume of 100 ml. High-efficiency heating and extraction hood with exhaust collector.behr single-knob control for particularly easy and fast programming.Menu navigation in national language.25 freely configurable programs for block temperature and digestion time.Applications can be saved.USB interface.The removable inspection door on the insertion rack enables the progress of the digestion to be observed.Complete systems with digestion vessels, rack and extraction hood.
€3.449,00
Micro Kjeldahl block digestion systems K 16, K 24 and K 40 | Type : K 24, Description : with 24 sample slots, for digestion vesselswith a volume of 100 ml
Micro Kjeldahl block digestion systems K 16, K 24 and K 40 | Type : K 24, Description : with 24 sample slots, for digestion vesselswith a volume of 100 ml
Brand: Behr Labor-Technik GmbHAvailable in 3 variantsBlock digestion systems with high-quality corrosion-resistant block housing made of stainless steel. With 16, 24 or 40 sample slots for micro Kjeldahl digestion vessels with a volume of 100 ml. High-efficiency heating and extraction hood with exhaust collector.behr single-knob control for particularly easy and fast programming.Menu navigation in national language.25 freely configurable programs for block temperature and digestion time.Applications can be saved.USB interface.The removable inspection door on the insertion rack enables the progress of the digestion to be observed.Complete systems with digestion vessels, rack and extraction hood.
€4.123,00
Micro Kjeldahl block digestion systems K 16, K 24 and K 40 | Type : K 40, Description : with 40 sample slots, for digestion vesselswith a volume of 100 ml
Micro Kjeldahl block digestion systems K 16, K 24 and K 40 | Type : K 40, Description : with 40 sample slots, for digestion vesselswith a volume of 100 ml
Brand: Behr Labor-Technik GmbHAvailable in 3 variantsBlock digestion systems with high-quality corrosion-resistant block housing made of stainless steel. With 16, 24 or 40 sample slots for micro Kjeldahl digestion vessels with a volume of 100 ml. High-efficiency heating and extraction hood with exhaust collector.behr single-knob control for particularly easy and fast programming.Menu navigation in national language.25 freely configurable programs for block temperature and digestion time.Applications can be saved.USB interface.The removable inspection door on the insertion rack enables the progress of the digestion to be observed.Complete systems with digestion vessels, rack and extraction hood.
€5.635,00
Mixed-bed ion exchanger made of stainless steel | Type : E28dA, Material : Stainless steel V 4A, Description : conductivity meter with limit switch and electrovalve
Mixed-bed ion exchanger made of stainless steel | Type : E28dA, Material : Stainless steel V 4A, Description : conductivity meter with limit switch and electrovalve
Brand: Behr Labor-Technik GmbHAvailable in 6 variantsStandard cartridge made of V4A stainless steel for general purpose application: To supply laboratory glassware washers, for general laboratory maintenance and for small industrial consumers. For subsequent demineralization of reverse osmosis systems.pressure resistant to 10 bar / 8 bar at E40dAoptimum exploitation of the ion exchanger capacity due to absolute uniform water distribution in the unitflow rates up to 700 litres/hourthe unique behropur® jet nozzle system distributes the raw water over the entire resin bed. This ensures an optimum exchange capacity and qualitycan be connected to the raw water network directly and without a pressure reducerresistant to alternating pressurehard rubber collars vulcanized to the base and top of the unit offer effective protectionconvenient transport thanks to the handles embedded into the top part of the unitconductivity is controlled directly on the unit (installed measuring equipment) or with remote location meterAlso available with shut-off when the limit value is reached and limit control
€1.648,60
Mixed-bed ion exchanger made of stainless steel | Type : E40d, Material : Stainless steel V 4A, Description : complete with conductivity meter
Mixed-bed ion exchanger made of stainless steel | Type : E40d, Material : Stainless steel V 4A, Description : complete with conductivity meter
Brand: Behr Labor-Technik GmbHAvailable in 6 variantsStandard cartridge made of V4A stainless steel for general purpose application: To supply laboratory glassware washers, for general laboratory maintenance and for small industrial consumers. For subsequent demineralization of reverse osmosis systems.pressure resistant to 10 bar / 8 bar at E40dAoptimum exploitation of the ion exchanger capacity due to absolute uniform water distribution in the unitflow rates up to 700 litres/hourthe unique behropur® jet nozzle system distributes the raw water over the entire resin bed. This ensures an optimum exchange capacity and qualitycan be connected to the raw water network directly and without a pressure reducerresistant to alternating pressurehard rubber collars vulcanized to the base and top of the unit offer effective protectionconvenient transport thanks to the handles embedded into the top part of the unitconductivity is controlled directly on the unit (installed measuring equipment) or with remote location meterAlso available with shut-off when the limit value is reached and limit control
€1.915,40
Mixed-bed ion exchanger made of stainless steel | Type : E40dA, Material : Nylon, Description : conductivity meter with limit switch and electrovalve
Mixed-bed ion exchanger made of stainless steel | Type : E40dA, Material : Nylon, Description : conductivity meter with limit switch and electrovalve
Brand: Behr Labor-Technik GmbHAvailable in 6 variantsStandard cartridge made of V4A stainless steel for general purpose application: To supply laboratory glassware washers, for general laboratory maintenance and for small industrial consumers. For subsequent demineralization of reverse osmosis systems.pressure resistant to 10 bar / 8 bar at E40dAoptimum exploitation of the ion exchanger capacity due to absolute uniform water distribution in the unitflow rates up to 700 litres/hourthe unique behropur® jet nozzle system distributes the raw water over the entire resin bed. This ensures an optimum exchange capacity and qualitycan be connected to the raw water network directly and without a pressure reducerresistant to alternating pressurehard rubber collars vulcanized to the base and top of the unit offer effective protectionconvenient transport thanks to the handles embedded into the top part of the unitconductivity is controlled directly on the unit (installed measuring equipment) or with remote location meterAlso available with shut-off when the limit value is reached and limit control
€2.293,90
Mixed-bed ion exchanger made of stainless steel | Type : E40dZ, Material : Stainless steel V 4A, Description : spare cartridge
Mixed-bed ion exchanger made of stainless steel | Type : E40dZ, Material : Stainless steel V 4A, Description : spare cartridge
Brand: Behr Labor-Technik GmbHAvailable in 6 variantsStandard cartridge made of V4A stainless steel for general purpose application: To supply laboratory glassware washers, for general laboratory maintenance and for small industrial consumers. For subsequent demineralization of reverse osmosis systems.pressure resistant to 10 bar / 8 bar at E40dAoptimum exploitation of the ion exchanger capacity due to absolute uniform water distribution in the unitflow rates up to 700 litres/hourthe unique behropur® jet nozzle system distributes the raw water over the entire resin bed. This ensures an optimum exchange capacity and qualitycan be connected to the raw water network directly and without a pressure reducerresistant to alternating pressurehard rubber collars vulcanized to the base and top of the unit offer effective protectionconvenient transport thanks to the handles embedded into the top part of the unitconductivity is controlled directly on the unit (installed measuring equipment) or with remote location meterAlso available with shut-off when the limit value is reached and limit control
€1.655,40
Mixed-bed ion exchanger made of stainless steel | Type: E28d, Material: Stainless steel V 4A, Description: complete with conductivity meter
Mixed-bed ion exchanger made of stainless steel | Type: E28d, Material: Stainless steel V 4A, Description: complete with conductivity meter
Brand: Behr Labor-Technik GmbHAvailable in 6 variantsStandard cartridge made of V4A stainless steel for general purpose application: To supply laboratory glassware washers, for general laboratory maintenance and for small industrial consumers. For subsequent demineralization of reverse osmosis systems.pressure resistant to 10 bar / 8 bar at E40dAoptimum exploitation of the ion exchanger capacity due to absolute uniform water distribution in the unitflow rates up to 700 litres/hourthe unique behropur® jet nozzle system distributes the raw water over the entire resin bed. This ensures an optimum exchange capacity and qualitycan be connected to the raw water network directly and without a pressure reducerresistant to alternating pressurehard rubber collars vulcanized to the base and top of the unit offer effective protectionconvenient transport thanks to the handles embedded into the top part of the unitconductivity is controlled directly on the unit (installed measuring equipment) or with remote location meterAlso available with shut-off when the limit value is reached and limit control
€1.146,90
121314151617

Copyright © 2024 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.