Please wait

Your message is being sent

An error occurred

Thermoreactor CR 2200 / CR 3200 / CR 4200 | Type : CR 3200
Thermoreactor CR 2200 / CR 3200 / CR 4200 | Type : CR 3200
Brand: Xylem Analytics Germany (WTW)Available in 3 variantsCR 2200:Routine unit for waste water analysisStored programs for all important digestionsThermoblock with 12 holes for 16mm o.d. reaction tubesTemperatures: 100°C, 120°C, 148°C and 150°C8 fixed heating programmes: 148°C and 2 hours, 148°C and 20 minutes, 120°C and 30 minutes, 120°C and 60 minutes, 150°C and 120 minutes, 120°C and 120 minutes, 100°C and 60 minutes, 30 minutesAutomatic temperature switch-off after end of set programsCR 3200:CR 3200 thermoreactor for thermal digestion with 2x12 round cuvettes with 8 fixed / 8 user-defined programs with temperatures of up to 170°C and AQACR 4200:Professional unit for waste water analysis2 thermoblocks with 12 holes each for 16mm o.d. reaction tubes,8 fixed heating programs (as CR2200) and 8 user-defined programs (from room temperature (25°C) to 170°C and 0 to 180 minutes)High Temperature Capability2 different programs and and temperates can be used simultaneously (CR 4200 only)Automatic temperature switch-off after end of set programsOptional: External temperature probe TFK CR
€1.592,00
Thermoreactor CR 2200 / CR 3200 / CR 4200 | Type: CR 4200
Thermoreactor CR 2200 / CR 3200 / CR 4200 | Type: CR 4200
Brand: Xylem Analytics Germany (WTW)Available in 3 variantsCR 2200:Routine unit for waste water analysisStored programs for all important digestionsThermoblock with 12 holes for 16mm o.d. reaction tubesTemperatures: 100°C, 120°C, 148°C and 150°C8 fixed heating programmes: 148°C and 2 hours, 148°C and 20 minutes, 120°C and 30 minutes, 120°C and 60 minutes, 150°C and 120 minutes, 120°C and 120 minutes, 100°C and 60 minutes, 30 minutesAutomatic temperature switch-off after end of set programsCR 3200:CR 3200 thermoreactor for thermal digestion with 2x12 round cuvettes with 8 fixed / 8 user-defined programs with temperatures of up to 170°C and AQACR 4200:Professional unit for waste water analysis2 thermoblocks with 12 holes each for 16mm o.d. reaction tubes,8 fixed heating programs (as CR2200) and 8 user-defined programs (from room temperature (25°C) to 170°C and 0 to 180 minutes)High Temperature Capability2 different programs and and temperates can be used simultaneously (CR 4200 only)Automatic temperature switch-off after end of set programsOptional: External temperature probe TFK CR
€1.961,00
Turbidity meter Turb® 750 IR | Type : Turb® 750 IR
Turbidity meter Turb® 750 IR | Type : Turb® 750 IR
Brand: Xylem Analytics Germany (WTW)Nephelometrical turbidity measurement according to DIN EN ISO 7027-1.
€3.388,00
Turbidity meter Turb® 750 T | Type : Turb® 750 T
Turbidity meter Turb® 750 T | Type : Turb® 750 T
Brand: Xylem Analytics Germany (WTW)Nephelometrical turbidity measurement according to US EPA 180.1.
€3.442,00
Turbidity meters Turb® 430 | Type : Turb® 430 IR, Description : with infra red LED
Turbidity meters Turb® 430 | Type : Turb® 430 IR, Description : with infra red LED
Brand: Xylem Analytics Germany (WTW)Available in 4 variantsThe turbidity meters Turb® 430 IR acc. to DIN ISO 27027 and Turb® 430 T acc. to US EPA 180.1 meet the requirements of the nephelometric measurement at 90° stray light for drinking water with highest precision, especially in the range < 1 NTU. The measuring range comprises 0-1100 NTU/FNU with automatic measuring range switching and is therefore suitable for water analysis as well as quality control, such as gasoline, cell cultures, as well as in the food and beverage industries.The measurement and automatic 3-point calibration runs self-explanatory and menu-controlled. The calibration takes place via an AMCO Clear® standard set (0.02-10-1000 NTU). Up to 1000 data sets including sample ID numbers can be stored and later put out GLP-compliant via the PC software LSdata. The quality assurance of the measured results is supported by calibration interval setting with documentation.Scope of delivery: Turb® 430 IR / Turb® 430 T: Turbidity meter with calibration set 0.02-10.0-100 NTUTurb® 430 IR/SET / Turb® 430 T/SET: Turbidity meter in case with table insert, calibration set 0.02-10.0-100 NTU, PC software LSdata, accessories
€2.059,00
Turbidity meters Turb® 430 | Type : Turb® 430 T, Description : with tungsten lamp
Turbidity meters Turb® 430 | Type : Turb® 430 T, Description : with tungsten lamp
Brand: Xylem Analytics Germany (WTW)Available in 4 variantsThe turbidity meters Turb® 430 IR acc. to DIN ISO 27027 and Turb® 430 T acc. to US EPA 180.1 meet the requirements of the nephelometric measurement at 90° stray light for drinking water with highest precision, especially in the range < 1 NTU. The measuring range comprises 0-1100 NTU/FNU with automatic measuring range switching and is therefore suitable for water analysis as well as quality control, such as gasoline, cell cultures, as well as in the food and beverage industries.The measurement and automatic 3-point calibration runs self-explanatory and menu-controlled. The calibration takes place via an AMCO Clear® standard set (0.02-10-1000 NTU). Up to 1000 data sets including sample ID numbers can be stored and later put out GLP-compliant via the PC software LSdata. The quality assurance of the measured results is supported by calibration interval setting with documentation.Scope of delivery: Turb® 430 IR / Turb® 430 T: Turbidity meter with calibration set 0.02-10.0-100 NTUTurb® 430 IR/SET / Turb® 430 T/SET: Turbidity meter in case with table insert, calibration set 0.02-10.0-100 NTU, PC software LSdata, accessories
€2.227,00
Turbidity meters Turb® 430 | Type : Turb® 430 T/SET, Description : with tungsten lamp
Turbidity meters Turb® 430 | Type : Turb® 430 T/SET, Description : with tungsten lamp
Brand: Xylem Analytics Germany (WTW)Available in 4 variantsThe turbidity meters Turb® 430 IR acc. to DIN ISO 27027 and Turb® 430 T acc. to US EPA 180.1 meet the requirements of the nephelometric measurement at 90° stray light for drinking water with highest precision, especially in the range < 1 NTU. The measuring range comprises 0-1100 NTU/FNU with automatic measuring range switching and is therefore suitable for water analysis as well as quality control, such as gasoline, cell cultures, as well as in the food and beverage industries.The measurement and automatic 3-point calibration runs self-explanatory and menu-controlled. The calibration takes place via an AMCO Clear® standard set (0.02-10-1000 NTU). Up to 1000 data sets including sample ID numbers can be stored and later put out GLP-compliant via the PC software LSdata. The quality assurance of the measured results is supported by calibration interval setting with documentation.Scope of delivery: Turb® 430 IR / Turb® 430 T: Turbidity meter with calibration set 0.02-10.0-100 NTUTurb® 430 IR/SET / Turb® 430 T/SET: Turbidity meter in case with table insert, calibration set 0.02-10.0-100 NTU, PC software LSdata, accessories
€2.694,00
Turbidity meters Turb® 430 | Type: Turb® 430 IR/SET, Description: with infrared LED
Turbidity meters Turb® 430 | Type: Turb® 430 IR/SET, Description: with infrared LED
Brand: Xylem Analytics Germany (WTW)Available in 4 variantsThe turbidity meters Turb® 430 IR acc. to DIN ISO 27027 and Turb® 430 T acc. to US EPA 180.1 meet the requirements of the nephelometric measurement at 90° stray light for drinking water with highest precision, especially in the range < 1 NTU. The measuring range comprises 0-1100 NTU/FNU with automatic measuring range switching and is therefore suitable for water analysis as well as quality control, such as gasoline, cell cultures, as well as in the food and beverage industries.The measurement and automatic 3-point calibration runs self-explanatory and menu-controlled. The calibration takes place via an AMCO Clear® standard set (0.02-10-1000 NTU). Up to 1000 data sets including sample ID numbers can be stored and later put out GLP-compliant via the PC software LSdata. The quality assurance of the measured results is supported by calibration interval setting with documentation.Scope of delivery: Turb® 430 IR / Turb® 430 T: Turbidity meter with calibration set 0.02-10.0-100 NTUTurb® 430 IR/SET / Turb® 430 T/SET: Turbidity meter in case with table insert, calibration set 0.02-10.0-100 NTU, PC software LSdata, accessories
€2.516,00
Turbidity Sensor VisoTurb® 900-P for Meters MultiLine® IDS | Type : SB VT900, Description : Sample bottle, 500 ml
Turbidity Sensor VisoTurb® 900-P for Meters MultiLine® IDS | Type : SB VT900, Description : Sample bottle, 500 ml
Brand: Xylem Analytics Germany (WTW)Available in 3 variantsAccessories for measuring instruments MultiLine® IDS from WTW® for measuring turbidity parameters. Please order measuring instruments separately.
€44,80
Turbidity Sensor VisoTurb® 900-P for Meters MultiLine® IDS | Type: Cal-Kit VT900, Description: Kit incl. 1 x 250 ml 124 FNU / 1010 FNU each, zero point calibration bottle
Turbidity Sensor VisoTurb® 900-P for Meters MultiLine® IDS | Type: Cal-Kit VT900, Description: Kit incl. 1 x 250 ml 124 FNU / 1010 FNU each, zero point calibration bottle
Brand: Xylem Analytics Germany (WTW)Available in 3 variantsAccessories for measuring instruments MultiLine® IDS from WTW® for measuring turbidity parameters. Please order measuring instruments separately.
€305,00
Turbidity Sensor VisoTurb® 900-P for Meters MultiLine® IDS | Type: VisoTurb® 900-P, Description: IDS IR turbidity sensor
Turbidity Sensor VisoTurb® 900-P for Meters MultiLine® IDS | Type: VisoTurb® 900-P, Description: IDS IR turbidity sensor
Brand: Xylem Analytics Germany (WTW)Available in 3 variantsAccessories for measuring instruments MultiLine® IDS from WTW® for measuring turbidity parameters. Please order measuring instruments separately.
€1.679,00
Wireless measuring heads OxiTop® IDS | Type : OxiTop®-IDS 2, Description : 2 wireless measuring heads
Wireless measuring heads OxiTop® IDS | Type : OxiTop®-IDS 2, Description : 2 wireless measuring heads
Brand: Xylem Analytics Germany (WTW)Available in 4 variantsOxiTop®-IDS wireless measuring head with Bluetooth® LE technology for operation with Multi 3620 IDS or Multi 3630 IDS. For routine BOD readings also operable without IDS multiparameter instrument. OxiTop®-IDS/B with enhanced pressure range up to 1.5 bar and H2S resistant pressure sensor for biogas measurement.Memory for 360 measuring points3 operating buttonsBacklit graphic LCDControl LEDVolume pre-selectionFor routine BOD readings measurement duration selectable (1 to 7 days)Display of measuring curveDisplay of current readingsIntermediate values available
€986,00

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.