Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

Nabertherm GmbH
121314151617
Ovens TR 60 - TR 1050 up to 300°C | Type: TR 240/B510, Nominal capacity l: 240, Max. grids: 15
Ovens TR 60 - TR 1050 up to 300°C | Type: TR 240/B510, Nominal capacity l: 240, Max. grids: 15
Brand: Nabertherm GmbHAvailable in 15 variantsWith their maximum working temperature of 300°C and forced air circulation, the TR series ovens achieve very good temperature uniformity. They can be used for various applications such as e.g. drying, sterilising or warm storing. The stainless steel interior chamber is easy to clean and resistant to rust.Tmax 300°COperating range, room temperature +5 to 300°CModels TR 60 to TR 240 designed as tabletop modelsModels TR 420 and TR 1050 designed as floor standing modelsHorizontal, forced air circulation results in temperature uniformity better than ±5 °CStainless steel chamber, alloy 304 (AISI)/(DIN material no. 1.4301), rust-resistant and easy to cleanLarge handle to open and close the doorCharging in multiple layers possible using removeable trays (number of removeable trays included, see table below)Large, wide-opening swing door, hinged on the right with quick release for models TR 60 to TR 420Double swing door with quick release for TR 1050TR 1050 equipped with transport castorsPID microprocessor control with self-diagnostic systemInfinitely adjustable exhaust at the rear wall with operation from the frontAvailable controller variants are the R 7 as basic variant with adjustable holding temperature or the programmable controllers B 510 (with touch panel, 5 programs with 4 segments each) and C 550 (with touch panel, 10 programs with 20 segments each)Solid state relays provide for low noise operation220-240 V 1/N/PE 50/60 Hz connector as standardOption:Over-temperature limit controller with manual reset for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadInfinitely adjustable fan speed of the air-circulationWindow for observing chargeFurther removeable grids with railsSide inletStainless steel collecting pan to protect the furnace chamberDoor hinges on the left sideReinforced bottom plateSafety technology according to EN 1539 for charges containing liquid solvents (TR .. LS) up to model TR 240 LS, achievable temperature uniformity ±8 °CTransport castors for model TR 450Upgrading available to meet the quality requirements of AMS 2750 E or FDAProcess control and documentation via VCD software package for monitoring, documentation and controlThe number of shelves included in the scope of delivery is listed in the table.
€6.490,00
Ovens TR 60 - TR 1050 up to 300°C | Type: TR 240/C550, Nominal capacity l: 240, Max. grids: 15
Ovens TR 60 - TR 1050 up to 300°C | Type: TR 240/C550, Nominal capacity l: 240, Max. grids: 15
Brand: Nabertherm GmbHAvailable in 15 variantsWith their maximum working temperature of 300°C and forced air circulation, the TR series ovens achieve very good temperature uniformity. They can be used for various applications such as e.g. drying, sterilising or warm storing. The stainless steel interior chamber is easy to clean and resistant to rust.Tmax 300°COperating range, room temperature +5 to 300°CModels TR 60 to TR 240 designed as tabletop modelsModels TR 420 and TR 1050 designed as floor standing modelsHorizontal, forced air circulation results in temperature uniformity better than ±5 °CStainless steel chamber, alloy 304 (AISI)/(DIN material no. 1.4301), rust-resistant and easy to cleanLarge handle to open and close the doorCharging in multiple layers possible using removeable trays (number of removeable trays included, see table below)Large, wide-opening swing door, hinged on the right with quick release for models TR 60 to TR 420Double swing door with quick release for TR 1050TR 1050 equipped with transport castorsPID microprocessor control with self-diagnostic systemInfinitely adjustable exhaust at the rear wall with operation from the frontAvailable controller variants are the R 7 as basic variant with adjustable holding temperature or the programmable controllers B 510 (with touch panel, 5 programs with 4 segments each) and C 550 (with touch panel, 10 programs with 20 segments each)Solid state relays provide for low noise operation220-240 V 1/N/PE 50/60 Hz connector as standardOption:Over-temperature limit controller with manual reset for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadInfinitely adjustable fan speed of the air-circulationWindow for observing chargeFurther removeable grids with railsSide inletStainless steel collecting pan to protect the furnace chamberDoor hinges on the left sideReinforced bottom plateSafety technology according to EN 1539 for charges containing liquid solvents (TR .. LS) up to model TR 240 LS, achievable temperature uniformity ±8 °CTransport castors for model TR 450Upgrading available to meet the quality requirements of AMS 2750 E or FDAProcess control and documentation via VCD software package for monitoring, documentation and controlThe number of shelves included in the scope of delivery is listed in the table.
€7.240,00
Ovens TR 60 - TR 1050 up to 300°C | Type: TR 240/R7, Nominal capacity l: 240, Max. grids: 15
Ovens TR 60 - TR 1050 up to 300°C | Type: TR 240/R7, Nominal capacity l: 240, Max. grids: 15
Brand: Nabertherm GmbHAvailable in 15 variantsWith their maximum working temperature of 300°C and forced air circulation, the TR series ovens achieve very good temperature uniformity. They can be used for various applications such as e.g. drying, sterilising or warm storing. The stainless steel interior chamber is easy to clean and resistant to rust.Tmax 300°COperating range, room temperature +5 to 300°CModels TR 60 to TR 240 designed as tabletop modelsModels TR 420 and TR 1050 designed as floor standing modelsHorizontal, forced air circulation results in temperature uniformity better than ±5 °CStainless steel chamber, alloy 304 (AISI)/(DIN material no. 1.4301), rust-resistant and easy to cleanLarge handle to open and close the doorCharging in multiple layers possible using removeable trays (number of removeable trays included, see table below)Large, wide-opening swing door, hinged on the right with quick release for models TR 60 to TR 420Double swing door with quick release for TR 1050TR 1050 equipped with transport castorsPID microprocessor control with self-diagnostic systemInfinitely adjustable exhaust at the rear wall with operation from the frontAvailable controller variants are the R 7 as basic variant with adjustable holding temperature or the programmable controllers B 510 (with touch panel, 5 programs with 4 segments each) and C 550 (with touch panel, 10 programs with 20 segments each)Solid state relays provide for low noise operation220-240 V 1/N/PE 50/60 Hz connector as standardOption:Over-temperature limit controller with manual reset for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadInfinitely adjustable fan speed of the air-circulationWindow for observing chargeFurther removeable grids with railsSide inletStainless steel collecting pan to protect the furnace chamberDoor hinges on the left sideReinforced bottom plateSafety technology according to EN 1539 for charges containing liquid solvents (TR .. LS) up to model TR 240 LS, achievable temperature uniformity ±8 °CTransport castors for model TR 450Upgrading available to meet the quality requirements of AMS 2750 E or FDAProcess control and documentation via VCD software package for monitoring, documentation and controlThe number of shelves included in the scope of delivery is listed in the table.
€6.170,00
Ovens TR 60 - TR 1050 up to 300°C | Type: TR 450/B510, Nominal capacity l: 450, Max. grids: 15
Ovens TR 60 - TR 1050 up to 300°C | Type: TR 450/B510, Nominal capacity l: 450, Max. grids: 15
Brand: Nabertherm GmbHAvailable in 15 variantsWith their maximum working temperature of 300°C and forced air circulation, the TR series ovens achieve very good temperature uniformity. They can be used for various applications such as e.g. drying, sterilising or warm storing. The stainless steel interior chamber is easy to clean and resistant to rust.Tmax 300°COperating range, room temperature +5 to 300°CModels TR 60 to TR 240 designed as tabletop modelsModels TR 420 and TR 1050 designed as floor standing modelsHorizontal, forced air circulation results in temperature uniformity better than ±5 °CStainless steel chamber, alloy 304 (AISI)/(DIN material no. 1.4301), rust-resistant and easy to cleanLarge handle to open and close the doorCharging in multiple layers possible using removeable trays (number of removeable trays included, see table below)Large, wide-opening swing door, hinged on the right with quick release for models TR 60 to TR 420Double swing door with quick release for TR 1050TR 1050 equipped with transport castorsPID microprocessor control with self-diagnostic systemInfinitely adjustable exhaust at the rear wall with operation from the frontAvailable controller variants are the R 7 as basic variant with adjustable holding temperature or the programmable controllers B 510 (with touch panel, 5 programs with 4 segments each) and C 550 (with touch panel, 10 programs with 20 segments each)Solid state relays provide for low noise operation220-240 V 1/N/PE 50/60 Hz connector as standardOption:Over-temperature limit controller with manual reset for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadInfinitely adjustable fan speed of the air-circulationWindow for observing chargeFurther removeable grids with railsSide inletStainless steel collecting pan to protect the furnace chamberDoor hinges on the left sideReinforced bottom plateSafety technology according to EN 1539 for charges containing liquid solvents (TR .. LS) up to model TR 240 LS, achievable temperature uniformity ±8 °CTransport castors for model TR 450Upgrading available to meet the quality requirements of AMS 2750 E or FDAProcess control and documentation via VCD software package for monitoring, documentation and controlThe number of shelves included in the scope of delivery is listed in the table.
€9.460,00
Ovens TR 60 - TR 1050 up to 300°C | Type: TR 450/C550, Nominal capacity l: 450, Max. grids: 15
Ovens TR 60 - TR 1050 up to 300°C | Type: TR 450/C550, Nominal capacity l: 450, Max. grids: 15
Brand: Nabertherm GmbHAvailable in 15 variantsWith their maximum working temperature of 300°C and forced air circulation, the TR series ovens achieve very good temperature uniformity. They can be used for various applications such as e.g. drying, sterilising or warm storing. The stainless steel interior chamber is easy to clean and resistant to rust.Tmax 300°COperating range, room temperature +5 to 300°CModels TR 60 to TR 240 designed as tabletop modelsModels TR 420 and TR 1050 designed as floor standing modelsHorizontal, forced air circulation results in temperature uniformity better than ±5 °CStainless steel chamber, alloy 304 (AISI)/(DIN material no. 1.4301), rust-resistant and easy to cleanLarge handle to open and close the doorCharging in multiple layers possible using removeable trays (number of removeable trays included, see table below)Large, wide-opening swing door, hinged on the right with quick release for models TR 60 to TR 420Double swing door with quick release for TR 1050TR 1050 equipped with transport castorsPID microprocessor control with self-diagnostic systemInfinitely adjustable exhaust at the rear wall with operation from the frontAvailable controller variants are the R 7 as basic variant with adjustable holding temperature or the programmable controllers B 510 (with touch panel, 5 programs with 4 segments each) and C 550 (with touch panel, 10 programs with 20 segments each)Solid state relays provide for low noise operation220-240 V 1/N/PE 50/60 Hz connector as standardOption:Over-temperature limit controller with manual reset for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadInfinitely adjustable fan speed of the air-circulationWindow for observing chargeFurther removeable grids with railsSide inletStainless steel collecting pan to protect the furnace chamberDoor hinges on the left sideReinforced bottom plateSafety technology according to EN 1539 for charges containing liquid solvents (TR .. LS) up to model TR 240 LS, achievable temperature uniformity ±8 °CTransport castors for model TR 450Upgrading available to meet the quality requirements of AMS 2750 E or FDAProcess control and documentation via VCD software package for monitoring, documentation and controlThe number of shelves included in the scope of delivery is listed in the table.
€10.210,00
Ovens TR 60 - TR 1050 up to 300°C | Type: TR 450/R7, Nominal capacity l: 450, Max. grids: 15
Ovens TR 60 - TR 1050 up to 300°C | Type: TR 450/R7, Nominal capacity l: 450, Max. grids: 15
Brand: Nabertherm GmbHAvailable in 15 variantsWith their maximum working temperature of 300°C and forced air circulation, the TR series ovens achieve very good temperature uniformity. They can be used for various applications such as e.g. drying, sterilising or warm storing. The stainless steel interior chamber is easy to clean and resistant to rust.Tmax 300°COperating range, room temperature +5 to 300°CModels TR 60 to TR 240 designed as tabletop modelsModels TR 420 and TR 1050 designed as floor standing modelsHorizontal, forced air circulation results in temperature uniformity better than ±5 °CStainless steel chamber, alloy 304 (AISI)/(DIN material no. 1.4301), rust-resistant and easy to cleanLarge handle to open and close the doorCharging in multiple layers possible using removeable trays (number of removeable trays included, see table below)Large, wide-opening swing door, hinged on the right with quick release for models TR 60 to TR 420Double swing door with quick release for TR 1050TR 1050 equipped with transport castorsPID microprocessor control with self-diagnostic systemInfinitely adjustable exhaust at the rear wall with operation from the frontAvailable controller variants are the R 7 as basic variant with adjustable holding temperature or the programmable controllers B 510 (with touch panel, 5 programs with 4 segments each) and C 550 (with touch panel, 10 programs with 20 segments each)Solid state relays provide for low noise operation220-240 V 1/N/PE 50/60 Hz connector as standardOption:Over-temperature limit controller with manual reset for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadInfinitely adjustable fan speed of the air-circulationWindow for observing chargeFurther removeable grids with railsSide inletStainless steel collecting pan to protect the furnace chamberDoor hinges on the left sideReinforced bottom plateSafety technology according to EN 1539 for charges containing liquid solvents (TR .. LS) up to model TR 240 LS, achievable temperature uniformity ±8 °CTransport castors for model TR 450Upgrading available to meet the quality requirements of AMS 2750 E or FDAProcess control and documentation via VCD software package for monitoring, documentation and controlThe number of shelves included in the scope of delivery is listed in the table.
€9.140,00
Ovens TR 60 - TR 1050 up to 300°C | Type: TR 60/B510, Nominal capacity l: 60, Max. grids: 4
Ovens TR 60 - TR 1050 up to 300°C | Type: TR 60/B510, Nominal capacity l: 60, Max. grids: 4
Brand: Nabertherm GmbHAvailable in 15 variantsWith their maximum working temperature of 300°C and forced air circulation, the TR series ovens achieve very good temperature uniformity. They can be used for various applications such as e.g. drying, sterilising or warm storing. The stainless steel interior chamber is easy to clean and resistant to rust.Tmax 300°COperating range, room temperature +5 to 300°CModels TR 60 to TR 240 designed as tabletop modelsModels TR 420 and TR 1050 designed as floor standing modelsHorizontal, forced air circulation results in temperature uniformity better than ±5 °CStainless steel chamber, alloy 304 (AISI)/(DIN material no. 1.4301), rust-resistant and easy to cleanLarge handle to open and close the doorCharging in multiple layers possible using removeable trays (number of removeable trays included, see table below)Large, wide-opening swing door, hinged on the right with quick release for models TR 60 to TR 420Double swing door with quick release for TR 1050TR 1050 equipped with transport castorsPID microprocessor control with self-diagnostic systemInfinitely adjustable exhaust at the rear wall with operation from the frontAvailable controller variants are the R 7 as basic variant with adjustable holding temperature or the programmable controllers B 510 (with touch panel, 5 programs with 4 segments each) and C 550 (with touch panel, 10 programs with 20 segments each)Solid state relays provide for low noise operation220-240 V 1/N/PE 50/60 Hz connector as standardOption:Over-temperature limit controller with manual reset for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadInfinitely adjustable fan speed of the air-circulationWindow for observing chargeFurther removeable grids with railsSide inletStainless steel collecting pan to protect the furnace chamberDoor hinges on the left sideReinforced bottom plateSafety technology according to EN 1539 for charges containing liquid solvents (TR .. LS) up to model TR 240 LS, achievable temperature uniformity ±8 °CTransport castors for model TR 450Upgrading available to meet the quality requirements of AMS 2750 E or FDAProcess control and documentation via VCD software package for monitoring, documentation and controlThe number of shelves included in the scope of delivery is listed in the table.
€3.370,00
Ovens TR 60 - TR 1050 up to 300°C | Type: TR 60/C550, Nominal capacity l: 60, Max. grids: 4
Ovens TR 60 - TR 1050 up to 300°C | Type: TR 60/C550, Nominal capacity l: 60, Max. grids: 4
Brand: Nabertherm GmbHAvailable in 15 variantsWith their maximum working temperature of 300°C and forced air circulation, the TR series ovens achieve very good temperature uniformity. They can be used for various applications such as e.g. drying, sterilising or warm storing. The stainless steel interior chamber is easy to clean and resistant to rust.Tmax 300°COperating range, room temperature +5 to 300°CModels TR 60 to TR 240 designed as tabletop modelsModels TR 420 and TR 1050 designed as floor standing modelsHorizontal, forced air circulation results in temperature uniformity better than ±5 °CStainless steel chamber, alloy 304 (AISI)/(DIN material no. 1.4301), rust-resistant and easy to cleanLarge handle to open and close the doorCharging in multiple layers possible using removeable trays (number of removeable trays included, see table below)Large, wide-opening swing door, hinged on the right with quick release for models TR 60 to TR 420Double swing door with quick release for TR 1050TR 1050 equipped with transport castorsPID microprocessor control with self-diagnostic systemInfinitely adjustable exhaust at the rear wall with operation from the frontAvailable controller variants are the R 7 as basic variant with adjustable holding temperature or the programmable controllers B 510 (with touch panel, 5 programs with 4 segments each) and C 550 (with touch panel, 10 programs with 20 segments each)Solid state relays provide for low noise operation220-240 V 1/N/PE 50/60 Hz connector as standardOption:Over-temperature limit controller with manual reset for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadInfinitely adjustable fan speed of the air-circulationWindow for observing chargeFurther removeable grids with railsSide inletStainless steel collecting pan to protect the furnace chamberDoor hinges on the left sideReinforced bottom plateSafety technology according to EN 1539 for charges containing liquid solvents (TR .. LS) up to model TR 240 LS, achievable temperature uniformity ±8 °CTransport castors for model TR 450Upgrading available to meet the quality requirements of AMS 2750 E or FDAProcess control and documentation via VCD software package for monitoring, documentation and controlThe number of shelves included in the scope of delivery is listed in the table.
€4.120,00
Ovens TR 60 - TR 1050 up to 300°C | Type: TR 60/R7, Nominal capacity l: 60, Max. grids: 4
Ovens TR 60 - TR 1050 up to 300°C | Type: TR 60/R7, Nominal capacity l: 60, Max. grids: 4
Brand: Nabertherm GmbHAvailable in 15 variantsWith their maximum working temperature of 300°C and forced air circulation, the TR series ovens achieve very good temperature uniformity. They can be used for various applications such as e.g. drying, sterilising or warm storing. The stainless steel interior chamber is easy to clean and resistant to rust.Tmax 300°COperating range, room temperature +5 to 300°CModels TR 60 to TR 240 designed as tabletop modelsModels TR 420 and TR 1050 designed as floor standing modelsHorizontal, forced air circulation results in temperature uniformity better than ±5 °CStainless steel chamber, alloy 304 (AISI)/(DIN material no. 1.4301), rust-resistant and easy to cleanLarge handle to open and close the doorCharging in multiple layers possible using removeable trays (number of removeable trays included, see table below)Large, wide-opening swing door, hinged on the right with quick release for models TR 60 to TR 420Double swing door with quick release for TR 1050TR 1050 equipped with transport castorsPID microprocessor control with self-diagnostic systemInfinitely adjustable exhaust at the rear wall with operation from the frontAvailable controller variants are the R 7 as basic variant with adjustable holding temperature or the programmable controllers B 510 (with touch panel, 5 programs with 4 segments each) and C 550 (with touch panel, 10 programs with 20 segments each)Solid state relays provide for low noise operation220-240 V 1/N/PE 50/60 Hz connector as standardOption:Over-temperature limit controller with manual reset for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadInfinitely adjustable fan speed of the air-circulationWindow for observing chargeFurther removeable grids with railsSide inletStainless steel collecting pan to protect the furnace chamberDoor hinges on the left sideReinforced bottom plateSafety technology according to EN 1539 for charges containing liquid solvents (TR .. LS) up to model TR 240 LS, achievable temperature uniformity ±8 °CTransport castors for model TR 450Upgrading available to meet the quality requirements of AMS 2750 E or FDAProcess control and documentation via VCD software package for monitoring, documentation and controlThe number of shelves included in the scope of delivery is listed in the table.
€3.050,00
Ribbed Plates, Ceramic for Muffle and Ashing Furnaces | For: L 1 / LE 1, Width mm: 110, Depth mm: 90
Ribbed Plates, Ceramic for Muffle and Ashing Furnaces | For: L 1 / LE 1, Width mm: 110, Depth mm: 90
Brand: Nabertherm GmbHAvailable in 9 variantsFor temperatures up to max. 1200 °C.
€31,00
Ribbed Plates, Ceramic for Muffle and Ashing Furnaces | For: L 15 / LT 15 / LV 15 / LVT 15 / N 11, Width mm: 340, Depth mm: 220
Ribbed Plates, Ceramic for Muffle and Ashing Furnaces | For: L 15 / LT 15 / LV 15 / LVT 15 / N 11, Width mm: 340, Depth mm: 220
Brand: Nabertherm GmbHAvailable in 9 variantsFor temperatures up to max. 1200 °C.
€76,00
Ribbed Plates, Ceramic for Muffle and Ashing Furnaces | For: L 24 / LT 24, Width mm: 340, Depth mm: 270
Ribbed Plates, Ceramic for Muffle and Ashing Furnaces | For: L 24 / LT 24, Width mm: 340, Depth mm: 270
Brand: Nabertherm GmbHAvailable in 9 variantsFor temperatures up to max. 1200 °C.
€91,00
121314151617

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.