- Fryka-Kältetechnik GmbH
- IKA-Werke GmbH & Co.KG
- Peter Huber Kältemaschinenbau
- PolyScience
- Julabo GmbH
- DWK Life Sciences GmbH (Duran)
- Thermo Elect.LED GmbH (HaakeTC
- KGW Schieder GmbH
- Grant Instruments Ltd.
- Lenz-Laborglas GmbH & Co. KG
- A. Krüss Optronic GmbH
- Heathrow Scientific LLC
- bioanalytic GmbH
- Bandelin electronic
- Laborgeräte Süd GmbH & Co.KG
- Lauda Dr.R.Wobser GmbH & Co.KG
Accessories
Analytical balances
Moisture balances
Other balances
Pocket balances
Precision balances
Weights
Analytical balances
Moisture balances
Other balances
Pocket balances
Precision balances
Weights
Buffer solutions
Electrode accessories
Ion selective Electrodes
Paper, chopstick
pH-Electrodes
Portable devices
Redox-Electrodes
Table devices
Electrode accessories
Ion selective Electrodes
Paper, chopstick
pH-Electrodes
Portable devices
Redox-Electrodes
Table devices
Overalls, coats, jackets, trousers
Overshoes, overboots, socks
Surgical masks, beard covers, hoods, sleeves
Overshoes, overboots, socks
Surgical masks, beard covers, hoods, sleeves
Chairs and stools
Gowing benches
Mats and floor coverings
Tables, shelves, trolleys, dispensers
Wardrobes
Gowing benches
Mats and floor coverings
Tables, shelves, trolleys, dispensers
Wardrobes
Components for Extraction
Components for reaction and distillation
Distillation-Accessories
Dropping Funnels
Flasks with NS joint neck
Flat ground flange reaction vessels
Gas wash bottles
Ground joints, attachable
KPG stirrer and bearings
Laboratory reactors
NS joints accessories
Reflux condenser
Standard ground stoppers
Stopcocks and Valves
Tubing adapters
Components for reaction and distillation
Distillation-Accessories
Dropping Funnels
Flasks with NS joint neck
Flat ground flange reaction vessels
Gas wash bottles
Ground joints, attachable
KPG stirrer and bearings
Laboratory reactors
NS joints accessories
Reflux condenser
Standard ground stoppers
Stopcocks and Valves
Tubing adapters
Biobanking
Cryogenic accessories
Cryogenic boxes
Cryogenic racks
Cryogenic storage tanks
Cryogenic tubes
Dewar flasks
Ice machines
Liquid nitrogen-Accessories
Low and Ultra low temperature freezers
Refrigerators and Freezers
Refrigerators and Freezers ex protected
Transport boxes
Cryogenic accessories
Cryogenic boxes
Cryogenic racks
Cryogenic storage tanks
Cryogenic tubes
Dewar flasks
Ice machines
Liquid nitrogen-Accessories
Low and Ultra low temperature freezers
Refrigerators and Freezers
Refrigerators and Freezers ex protected
Transport boxes
Concentration
DNA and RNA isolation
DNA-Electrophoresis
Electroporation
Gel-Documentation
PCR
PCR cabinets
Thermocyclers
DNA and RNA isolation
DNA-Electrophoresis
Electroporation
Gel-Documentation
PCR
PCR cabinets
Thermocyclers
Accessories and reagents
Dissecting sets
Embedding cassettes
Microtoms
Scalpels
Tissue floating baths
Dissecting sets
Embedding cassettes
Microtoms
Scalpels
Tissue floating baths
Cold light sources
Counting chambers
Digital microscopes and cameras
Light microscopes
Microscopy accessories
Slide covers
Slide storage
Slides
Staining racks
Stereomicroscopes
Counting chambers
Digital microscopes and cameras
Light microscopes
Microscopy accessories
Slide covers
Slide storage
Slides
Staining racks
Stereomicroscopes
Thermoregulators CORIO™ CP | Type: CP, Working Temp. range °C: 20 ... 200, Temp. stability ± °C: 0.02
Brand: Julabo GmbHCORIO™ CP thermoregulators are capable to control the temperature of external applications in combination with an optional pump set. Suitable for bath vessels with a volume of up to 50 l.For internal and external applications (accessories required)Bright, white, easily visible display, even from a distanceVery quietEasy operationLow-level warning systemPump switch for internal and external circulationPowerful, continously variable pumpUSB connectionRS232 interfaceClass III (FL) according to DIN 12876-1Scope of supply: Thermoregulator, mains power cable, bath attachment clampThermoregulators CORIO™ CP | Type: CP, Working Temp. range °C: 20 ... 200, Temp. stability ± °C: 0.02
€1.760,00
Thermoregulators CORIO™ | Type: CORIO™ CD, Working Temp. range °C: 20…150, Temp. stability ± °C: 0.03
Brand: Julabo GmbHAvailable in 2 variantsThe CORIO™ C Immersion Circulator is the basic model of the CORIO™ circulator portfolio. The bath attachment clamp is included in delivery and facilitates mounting of the circulator on any bath tank up to 30 liters. With a few simple steps you can install a pump set onto the CORIO™ CD Immersion Circulator. In no time at all, your circulator is ready for temperature control of an external application.Precise temperature controlFor internal standard applicationsImmersion depth: 7.5 to 16.5 cmBright, white, easy to read displayWhisper quietEasy operationCORIO™ CFor bath tank up to 30 litersClass I (NFL) according to DIN 12876-1Circulation capacity 6 l/min at 0.1 barCORIO™ CDFor bath tank up to 50 litersPump change-over between internal and external circulationUSB interfaceClass III (FL) according to DIN 12876-1Circulation capacity 15 l/min at 0.35 barDelivery without bath please order separately.To adapt the CORIO™ Immersion Circulator to your individual application we offer a comprehensive range of accessories (racks, bath lids, and more).Thermoregulators CORIO™ | Type: CORIO™ CD, Working Temp. range °C: 20…150, Temp. stability ± °C: 0.03
€978,00
Thermoregulators DYNEO™ DD | Type: DD
Brand: Julabo GmbHAvailable in 3 variantsFor internal and external applications. The thermoregulators with maximum flexibility can be mounted with the sturdy bath clamp to any bath up to 50 liters. Equipped with USB interface, also available with optional analogue (extra code A) or RS232 (extra code D) interface.Easy switching between internal and external circulation (optional pump set, Cat. No. 4.658 027)Large colour TFT DisplayEasy to operate via central controllerIntegrated programmer for 8 x 60 program stepsClass III (FL) acc. to DIN 12876-1Continuously adjustable, powerful pressure pumpExternal Pt100 sensor connectionInstallation cooling coil for counter-cooling, Cat No. 4.658 026, available separatelyBath clamp included.Thermoregulators DYNEO™ DD | Type: DD
€1.996,00
Thermostatic baths with polycarbonate tanks | Type: KISS-108A, Bath capacity L: 8, Pressure pump max. L/min bar: 14 / 0.25
Brand: Peter Huber KältemaschinenbauAvailable in 10 variantsThe transparent polycarbonate baths are suitable for use up to 100°C. An immersion thermostat is mounted on the bath bridge for all models. With a pump adapter, this combination can also be used with external, closed applications. Models with the Pilot ONE controller have a variable speed pressure/suction pump and are therefore also suitable for external open applications.Thermostatic baths with polycarbonate tanks | Type: KISS-108A, Bath capacity L: 8, Pressure pump max. L/min bar: 14 / 0.25
€1.550,00
Thermostatic controller Optima™ TC120 | Type: TC120, Temperature: RT+5 ... 120 °C, Temperature stability: ±0,05 °C (70 °C)
Brand: Grant Instruments Ltd.Available in 2 variantsCombine with a plastic or stainless steel tank or with an accessory T-clamp for independent use.The two general purpose heating circulators offer excellent temperature stability and uniformity with a cooling/heating range of 0 °C to 100 °C* (T100) and -15 °C to 120 °C* (TC120).*For using at or below room temperature you need additional flow coolers C1G (9.920 765) or C2G (9.920 766).Features:T100: Visual alarm, 2 point recalibration, fixed over temperature cut-outTC120: Visual and audible alarm, timer, 2 point recalibration, adjustable over temperature cut-out, pump for external circulationT Clamp: For attaching the thermostats to any vertical sided tank with a maximum wall thickness of 35 mm for rectangular tanks, 30 mm for circular tanks (300 mm diameter), and a capacity of up to 50 l.Models with clamps available on request.Thermostatic controller Optima™ TC120 | Type: TC120, Temperature: RT+5 ... 120 °C, Temperature stability: ±0,05 °C (70 °C)
€1.271,00
Thermostatic controllers Optima™ TX150 / TXF200 | Type: TX150, Programmable: Remote via PC / labtop, 1 program / 30 segments
Brand: Grant Instruments Ltd.Available in 2 variantsCombine with a plastic or stainless steel tank or with an accessory T-clamp for independent use.The two advanced heating circulators feature a modern, icon driven programming interface and full colour display.For using at or below room temperature you need additional flow coolers C1G (9.920 765) or C2G (9.920 766).Features:Visual and audible alarm, timer, 5 point recalibration, adjustable over temperature cut-out, pump, external probe, progammable, relay, menu system, program storage, USB/RS-232 portModels with clamps available on request.Thermostatic controllers Optima™ TX150 / TXF200 | Type: TX150, Programmable: Remote via PC / labtop, 1 program / 30 segments
€1.629,00
Thread adapters | Type: M24x1.5 male - M30x1.5 female
Brand: Peter Huber KältemaschinenbauAvailable in 35 variantsThread adapters | Type: M24x1.5 male - M30x1.5 female
€120,00
Transparent bath tanks for immersion thermostats CORIO™ C / CD, PC | Type: BT19, Internal dimensions (W x D x H) mm: 300 x 500 x 150, External dimensions (W x D x H) mm: 370 x 580 x 160
Brand: Julabo GmbHAvailable in 4 variantsTransparent bath tanks for immersion thermostats CORIO™ C / CD, PC | Type: BT19, Internal dimensions (W x D x H) mm: 300 x 500 x 150, External dimensions (W x D x H) mm: 370 x 580 x 160
€332,00
Tubing insulations for refrigerated and heating circulators | Int. diam. mm: 18, Length m: 1, For tubing bore mm: 12
Brand: Julabo GmbHAvailable in 2 variantsBlack. Tubing insulations for CR tubings.Tubing insulations for refrigerated and heating circulators | Int. diam. mm: 18, Length m: 1, For tubing bore mm: 12
€22,00
Unichiller® (tower housing) with air cooled refrigeration | Type: Unichiller® 025T, Pump max. l/min / bar: 25 / 3,0, Dimensions (W x D x H) mm: 450 x 510 x 1230
Brand: Peter Huber KältemaschinenbauAvailable in 5 variantsMany applications depend on a reliable source of cooling. Circulating chillers in the Unichiller range offer an ideal solution for environmentally friendly and economical cooling in laboratory and industry. There are over 50 air and water cooled models to choose from, with cooling powers from 0.3 to 50 kW. Efficient energy management in all Huber chillers ensures low operating costs and reduced usage of valuable fresh water. Huber circulating chillers are a resource saving solution with a quick return on investment.Options on request: heating, natural refrigerant, externally open applications, winter option, outdoor setup.Unichiller® (tower housing) with air cooled refrigeration | Type: Unichiller® 025T, Pump max. l/min / bar: 25 / 3,0, Dimensions (W x D x H) mm: 450 x 510 x 1230
€18.050,00
Unichiller® (tower housing) with water cooled refrigeration | Type: Unichiller® 017Tw, Pump max. l/min / bar: 25 / 3,0, Dimensions (W x D x H) mm: 400 x 440 x 1230
Brand: Peter Huber KältemaschinenbauAvailable in 5 variantsMany applications depend on a reliable source of cooling. Circulating chillers in the Unichiller range offer an ideal solution for environmentally friendly and economical cooling in laboratory and industry. There are over 50 air and water cooled models to choose from, with cooling powers from 0.3 to 50 kW. Efficient energy management in all Huber chillers ensures low operating costs and reduced usage of valuable fresh water. Huber circulating chillers are a resource saving solution with a quick return on investment.Options on request: heating, natural refrigerant, externally open applications, winter option, outdoor setup.Unichiller® (tower housing) with water cooled refrigeration | Type: Unichiller® 017Tw, Pump max. l/min / bar: 25 / 3,0, Dimensions (W x D x H) mm: 400 x 440 x 1230
€17.500,00
Unichiller® with OLÉ controller | Type: Unichiller® 022w OLÉ, Working Temp. range °C: -10 ... 40, Cooling capacity kW at 15/0/-10°C: 2,2/1,6/1,0
Brand: Peter Huber KältemaschinenbauAvailable in 16 variantsHigh performance Unichiller with OLÉ controller for standard applications. The Unichiller with the OLÉ controller offers cooling powers up to 2.5 kW. The chiller is ideal for standard cooling applications in the laboratory or in industry. The energy efficient function of the chiller reduces the water consumption for many applications, helping to protect the environment and reducing operating costs. All models are fitted with the OLÉ controller with its modern OLED display as well as for RS232, USB interfaces and PT100 measurement sensor connection.P-models include circulating pumps with a high discharge pressure for applications with high pressure drops.Cooling power up to 2.5 kWAir- and watercooled modelsCompact, robust stainless steel housingsFitted with wheels for easy handlingOptional heating up to +100°CUnichiller® with OLÉ controller | Type: Unichiller® 022w OLÉ, Working Temp. range °C: -10 ... 40, Cooling capacity kW at 15/0/-10°C: 2,2/1,6/1,0
€7.490,00
Copyright © 2026 - Achrom nv - BE 0445.025.508 | General terms | Cookiebeleid | Privacybeleid | Handcrafted by CrayonCru®