Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

123456
Bath liquids for thermostatic baths | Type: Synth 60, Capacity l: 5, Temp. range °C: -50 ...45
Bath liquids for thermostatic baths | Type: Synth 60, Capacity l: 5, Temp. range °C: -50 ...45
Brand: Thermo Elect.LED GmbH (HaakeTCAvailable in 12 variantsBath liquids.Use of the appropriate liquids for heat transfer listed here offers many advantages:Safe to use, non toxic, and generally odourless formulationsResistance to ageing and viscosity changes with low susceptibility to corrosion.Silicone oils (SIL).Non-flammable, with long operational life.Synthetic heat transfer fluids (Synth).Usually formulated from a hydrocarbon base with low viscosity within the recommended working temperature range.Viscosity.For optimal temperature stability the bath fluid must be of low viscosity.Fire point.Fluids can spontaneously ignite above a certain temperature. EN 61010 stipulates that the maximum working temperature of the liquid should be 25 °C below its' fire point.Heating up range.Prolonged use is not permitted as the self-heating effect within these liquids may cause the overtemperature protection system of the pump unit to operate and shut down the pump.Operating temperature range.Thermostats may only be operated for an extended time in this range under certain conditions. Viscosity must not exceed 30 mPas. Otherwise pumps will not achieve their stated performance figures.Working temperature range.The long-term use range for peak thermostatic bath performance. Maximum viscosity level is approx. 5 mPas.
€255,00
Bath tanks for Temperature control systems IC / ICC | Type: IB 12 pro (M), Capacity litres: 12, External dimensions (W x D x H) mm: 461 x 354 x 195
Bath tanks for Temperature control systems IC / ICC | Type: IB 12 pro (M), Capacity litres: 12, External dimensions (W x D x H) mm: 461 x 354 x 195
Brand: IKA-Werke GmbH & Co.KGAvailable in 3 variants
€724,00
Bath tanks for Temperature control systems IC/ICC, plastic | Type: IB 18 eco (L), Capacity: 18 l, Max. temperature: 100 °C
Bath tanks for Temperature control systems IC/ICC, plastic | Type: IB 18 eco (L), Capacity: 18 l, Max. temperature: 100 °C
Brand: IKA-Werke GmbH & Co.KGAvailable in 2 variantsPlastic tanks up to 100 °C, only for water.
€628,00
Beakers, glass, jacketed wiht PTFE-Olive, type T-GL | Capacity ml: 250, Thread GL: 14, Int. diam. mm: 55
Beakers, glass, jacketed wiht PTFE-Olive, type T-GL | Capacity ml: 250, Thread GL: 14, Int. diam. mm: 55
Brand: KGW Schieder GmbHAvailable in 3 variantsDURAN®. For heating and cooling liquids. Thermostatting liquid is circulating between the double walls of the beaker jacket. With glass-screw connections GL14 with PTFE olives (O.D. 9mm, T-GL2000 with GL18 and O.D. 11mm) for thermostat hoses. Coolant ram pressure: 0.5bar at maximum, operating temperature: +120°C at maximum. Special sizes available on request.
€123,41
Beakers, glass, jacketed, type T | Capacity ml: 2000, Int. diam. mm: 112, Outer diam. mm: 135
Beakers, glass, jacketed, type T | Capacity ml: 2000, Int. diam. mm: 112, Outer diam. mm: 135
Brand: KGW Schieder GmbHAvailable in 3 variantsDURAN®. For heating and cooling liquids. Thermostatting liquid is circulating between the double walls of the beaker jacket. With glass olives (O.D. 12mm) for thermostat hoses. Coolant ram pressure: 0.5bar at maximum, operating temperature: +300°C at maximum. Special sizes available on request.
€301,12
Beer Force-Ageing-Test Bath BFT®5 | Type: BFT®5, Bath opening mm: 350 x 410, Bath tank depth mm: 270
Beer Force-Ageing-Test Bath BFT®5 | Type: BFT®5, Bath opening mm: 350 x 410, Bath tank depth mm: 270
Brand: Peter Huber KältemaschinenbauWe offer special air cooled circulator for the Beer Force-Ageing-Test. It is equipped with a programmer for the change between 0 °C / 40 °C and 0 °C / 60 °C in a 24 hour cycle. Casings and bath parts are made of stainless steel.
€10.750,00
Bridge circulators MAGIO MS and MX | Type: MS-Z, Dimensions (W x D x H) mm: 340 x 190 x 360, Temp. range °C: 20 ... 300
Bridge circulators MAGIO MS and MX | Type: MS-Z, Dimensions (W x D x H) mm: 340 x 190 x 360, Temp. range °C: 20 ... 300
Brand: Julabo GmbHAvailable in 2 variantsThanks to the adjustable stainless steel bridge the thermostats can be used with bath tanks up to a filling volume of 100 litres and bath widths from 33 to 68 cm.Simple control of complex applicationsInfinitely adjustable, extremely powerful pressure and suction pumpLarge, high-resolution TFT touch display with multilingual user interfaceMedium-contacting parts made of stainless steelIntegrated programmerExternal Pt100 connectionUSB interfaceRS232 interfaceEthernet interfaceAnalogue interfaces (optionally)Classification III according to DIN 12876-1
€4.053,00
Chiller DuraChill® | Type: CA 10, Description: With positive displacement pump, Pressure bar: 1.4 ... 5.7
Chiller DuraChill® | Type: CA 10, Description: With positive displacement pump, Pressure bar: 1.4 ... 5.7
Brand: PolyScienceAvailable in 8 variantsStable and reliable cooling for many common heat removal applications, including laser etching, AA furnaces, ICP, rotary evaporators, vacuum systems, reaction vessels, plasma etching, and condenser cooling. The chillers are available with turbine or positive displacement pump.A bright, full-color touchscreen displayCooling at ambient temperatures up to 30°CDynamicFilter™ self-cleaning filter systemLiquid level sensorUV light system to prevent growth inhibitorsUser-adjustable temperature, pressure, and flow rate alarmsExternal temperature tracking and communications capability (optionally)Cool Command™WhisperCool® noise reduction systemSelf-diagnostics service and functionality systemFront fill reservoir4 Casters, 2 of them locking
€12.135,96
Chiller DuraChill®, with turbine pump | Type: CA 03
Chiller DuraChill®, with turbine pump | Type: CA 03
Brand: PolyScienceAvailable in 4 variantsStable and reliable cooling for many common heat removal applications, including laser etching, AA furnaces, ICP, rotary evaporators, vacuum systems, reaction vessels, plasma etching, and condenser cooling.A bright, full-color touchscreen displayCooling at ambient temperatures up to 30 °CDynamicFilter™ self-cleaning filter systemLiquid level sensorUV light system to prevent growth inhibitorsUser-adjustable temperature, pressure, and flow rate alarmsExternal temperature tracking and communications capability (optionally)Cool Command™WhisperCool® noise reduction systemSelf-diagnostics service and functionality systemFront fill reservoir4 Casters, 2 of them locking
€7.397,27
Chiller Piccolo 280 OLÉ | Type: Piccolo 280 OLÉ
Chiller Piccolo 280 OLÉ | Type: Piccolo 280 OLÉ
Brand: Peter Huber KältemaschinenbauRecirculating chiller operates/works with Peltier technology, i.e. free of refrigerants and therefore environmentally friendly and maintenance-free.Large, bright OLED displaySimple operation with menu navigationSimultaneous display of set point, internal temperature, Tmin and TmaxUSB and RS232 interfacesAutostart function for power failureScope of supply: Chiller Piccolo 280 OLÉ, connector with hose barb
€3.000,00
Chillers, Minichiller® | Type: Minichiller® 900w OLÉ, Cooling capacity kW at 15/0/-10°C: 0.9 / 0.7 / 0.4, Working Temp. range °C: -25 ... 40
Chillers, Minichiller® | Type: Minichiller® 900w OLÉ, Cooling capacity kW at 15/0/-10°C: 0.9 / 0.7 / 0.4, Working Temp. range °C: -25 ... 40
Brand: Peter Huber KältemaschinenbauAvailable in 6 variantsSmall, robust and cost effective with its stainless steel casing. The Minichiller is the smallest Unichiller in the world. Minichillers are available with air or water-cooled refrigeration systems, illuminated level indicator, overflow and drain on the front. The filling port is on the top of the unit. All models use natural refrigerants as standard. Minichillers have suction and pressure pumps and therefore have the advantage of have a high flow at low pressure. This is particularly interesting for all pressure sensitive applications (e.g. glass condensors).
€5.250,00
Circulation Heat Exchanger HTS | Type: HTS 3, Working Temp. range °C: 3 ... 95, Pump max. l/min / bar: 33 / 0.7
Circulation Heat Exchanger HTS | Type: HTS 3, Working Temp. range °C: 3 ... 95, Pump max. l/min / bar: 33 / 0.7
Brand: Peter Huber KältemaschinenbauAvailable in 4 variantsHeat exchanger systems with circulation pump for connection to cooling water on the primary side. The devices provide a cooling circuit with stable pressure/ ow and adjustable operating temperature. The cooling capacity is generated using a plate heat exchanger via the cooling water. Since there is no active cooling machine, the devices operate in a quiet and energy-saving manner and are a cost-effective alternative to conventional chillers e.g. for the temperature control of Peltier elements, bioreactors, etc.The model HTS 1 contains the heat exchanger system, however it does not have any temperature control. The device is therefore suited for applications with low requirements for control accuracy.Effcient circulation pumpTemperature stability ±0.1 KRS232 interfacePt100 external sensor connectionLow cooling water usageApplication protection with cooling stage separation
€5.790,00
123456

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.