Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

181920212223
Measuring scoops, PP, coloured | Volume ml: 250, Length mm: 260, Colour: red
Measuring scoops, PP, coloured | Volume ml: 250, Length mm: 260, Colour: red
Brand: VITLAB GmbHAvailable in 13 variantsAlso suitable as weighing scoops. Easily readable volume quantities on the upper side of the handle.Food-safe product according to regulation (EU) No. 10/2011.
€43,68
Mesh, Polyamide | Mesh size µm: 30
Mesh, Polyamide | Mesh size µm: 30
Brand: Schwegmann Filtrations-TechnikAvailable in 13 variantsThermo-fixed Polyamide (Nylon) mesh is temperature stable from -40°C to +115°C. In water from 95°C to 100°C. Stability in acids is limited and dependant on concentration and temperature. Nylon exhibits outstanding stability in alkalis, including sodium and potassium solutions. Its chemical behaviour with respect to organic solvents is moderate to good. Minimum mesh width: 102cm, Length: 1mOther sizes available on request.
€102,65
Mesh, polyester | Mesh size µm: 1
Mesh, polyester | Mesh size µm: 1
Brand: Schwegmann Filtrations-TechnikAvailable in 8 variantsThermo-fixed PE mesh with temperature resistance from -75°C to +150°C (short). For long term heating max. 125°C. Resistant to acids but not alkalis.Dimensions: Minimum width 102cm, Length 100cm.Other sizes available on request.
€157,85
Micro Ball Mill GT300 | Type: Micro Ball Mill GT300, Min. speed rpm: 180, Max. speed rpm: 1800
Micro Ball Mill GT300 | Type: Micro Ball Mill GT300, Min. speed rpm: 180, Max. speed rpm: 1800
Brand: Beijing GrinderFor grinding and mixing of hard, medium-hard, soft, elastic and fibrous samples. Also suitable for cell disruption and DNA/RNA extraction. The mill is designed for very short processing times and high sample throughput. The grinding containers carry out horizontal, circular-arc-shaped oscillations and the grinding balls ensure effective grinding and mixing of the sample.Only 30 seconds average processing time2 grinding stations for bowls with a volume of 5 to 50 mlMultifunctional clamping device, which also holds adapters for reaction vesselsGrinding time digitally adjustable from 1 second to 100 minutesVariable speed from 180 to 1800 min-1Control via LCD displayProgrammable grinding parameters, up to 10 programs can be storedTransparent coverSafety interlockGrinding chamber, clamping system and swivel arm made of stainless steelMaintenance-free direct driveGrinding bowls made of different materials with volumes up to 50 ml available as accessoriesGrinding bowls and balls are not included in the scope of supply and must be ordered separately.
€5.986,58
Micro-Sampler, stainless steel | Tube diam. mm: 12, Length mm: 1200
Micro-Sampler, stainless steel | Tube diam. mm: 12, Length mm: 1200
Brand: Bürkle GmbHAvailable in 6 variantsWithout tip. V2A stainless steel. Sterilizable. GMP/FDA compliant. Specially for collecting small amounts of powder. Volumes of 0.2, 0.5, 1, 2, 5 and 10 ml can be taken simply, quickly and cleanly from different depths of sacks or containers. The Micro-Sampler tips are interchangeable so that tips with different volumes can be used.
€328,35
Microfine grinder drive MF 10 basic | Type: MF 10 basic, Min. speed rpm: 3000, Max. speed rpm: 6500
Microfine grinder drive MF 10 basic | Type: MF 10 basic, Min. speed rpm: 3000, Max. speed rpm: 6500
Brand: IKA-Werke GmbH & Co.KGAvailable in 3 variantsUniversal laboratory grinder, comprising powerful drive unit for use with a choice of accessory grinding heads. The user can choose between the impact grinding head for milling hard, brittle materials (see fig.) and the cutting head for processing fibrous material. The maximum granule size output can be set by using various insert sieves (with apertures between 0.25 mm and 4 mm) placed above the outlet. There is an NS29 standard ground joint at the outlet for attachment of receiving flasks.Grinding/cutting heads not included.
€5.339,00
Mini mill PULVERISETTE 23 | Type: PULVERISETTE 23, Min. speed rpm: 900, Max. speed rpm: 3000
Mini mill PULVERISETTE 23 | Type: PULVERISETTE 23, Min. speed rpm: 900, Max. speed rpm: 3000
Brand: Fritsch GmbHIdeal for fine comminution of smallest quantities for wet and dry grinding as well as for cryogenic grinding. Its special spherical grinding bowl ensures much better performance in grinding, mixing and homogenising compared with similar models for example in chemical analysis, chromatography, mass spectrometry or x-ray structural analysis, preparation of samples for genetic research, homogenising of active ingredients, preparation of extracts in the forensic analysis, grinding of pigments and precious materials.
€3.865,00
Mixer Mill CryoMill | Type: CryoMill, Min. speed rpm: 300, Max. speed rpm: 1800
Mixer Mill CryoMill | Type: CryoMill, Min. speed rpm: 300, Max. speed rpm: 1800
Brand: Retsch GmbHThe CryoMill is designed for the cryogenic size reduction of materials which cannot be ground at room temperature or whose composition would be changed by it. The grinding jar is cooled before and during the grinding process with liquid nitrogen through an integrated cooling system. Thus the sample is embrittled and its volatile components are preserved. The size reduction principle is the same as that of the well-proven Mixer Mill MM 400. The CryoMill can also be operated without the cooling system which makes it suitable for a wide range of applications.Powerful cryogenic grinding by impact and friction, up to 30 HzClosed LN2-system (autofill) for enhanced safety, avoids any contact of the user with LN2Screw-top grinding jars for convenient, leak-proof operationClearly structured user interface, memory for 9 SOPsWide range of accessories including LN2feeding systems, various jar and ball sizes, adapter racks, materials
€11.350,00
Mixer mills MM 400 | Type: MM 400, Speed: 180 ... 1800 1/min, Max. Feed quantity/ Flow rate ml: 40
Mixer mills MM 400 | Type: MM 400, Speed: 180 ... 1800 1/min, Max. Feed quantity/ Flow rate ml: 40
Brand: Retsch GmbHThe mixer mills grind a great variety of materials such as tablets, minerals, bones, tissues, soils an plastics and achieves grind sizes down to 5 microns. For cryogenic grinding of temperature-sensitive samples, a short, external cooling of the sample inside the grinding jar is sufficient to embrittle the sample material. Please order grinding jars and grinding balls separately.Touch displayShort grinding times and two grinding stations for high sample throughputFor dry, wet and cryogenic grindingScrewable grinding bowls guarantee loss-free grindingCell disruption for DNA/RNA and protein extractionApplications in mechanochemistry thanks to grinding time up to 99 hReproducible results due to calibration 9 parameter combinations can be stored
€7.570,00
Mixer Mills MM 500 | Type: MM 500, Min. speed rpm: 180, Max. speed rpm: 2100
Mixer Mills MM 500 | Type: MM 500, Min. speed rpm: 180, Max. speed rpm: 2100
Brand: Retsch GmbHThe MM 500 is suitable for efficiently wet-mill samples to nanosized particles with only minor warming effects.Suitable for long-term grinding processes up to 99 hMemory for 12 SOPs4 program cycles with up to 99 repetitions4,3" touch display
€15.288,00
Mixers MICROTRON® MB 800 | Type: MB 800
Mixers MICROTRON® MB 800 | Type: MB 800
Brand: KINEMATICA GmbHThe systems MICROTRON® MB 800 are specially designed for mixing, dispersing, homogenizing, emulsifying and size reduction of cuttable materials. Attachments made from stainless steel with volumes of 2000 ml and 4000 ml are available for the MICROTRON® MB 800. The systems are safety laboratory devices: grounded, double safety isolated, radio screened. A safety system prevents uncontrolled starting and therewith personal injuries: the mixer can only be started with well attached lid. In case the lid will be removed during operation, the device will be stopped automatically. The systems are designed to withstand high loads; they are space-saving and always ready to use.Please order mixing jars separately.
€1.890,00
Mixing attachments for laboratory mixer MICROTRON®, borosilicate glass | Type: MBA 500
Mixing attachments for laboratory mixer MICROTRON®, borosilicate glass | Type: MBA 500
Brand: KINEMATICA GmbHAvailable in 4 variantsMixing attachments made of borosilicate glass with gasket and blade head.
€521,00
181920212223

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.