Please wait

Your message is being sent

An error occurred

20%
LLG-Floating pellets, PP | Description: Floating pellets
LLG-Floating pellets, PP | Description: Floating pellets
Brand: LLG LabwarePellets with 20 mm diameter. Can cover 0.1 m². Protect against evaporation and rapid temperature loss. Decreases hazardous vapors. Resistant against most acids, bases, solvents and mineral oils. Temperature stable up to 100 °C.
€37,30
€29,84
LLG-Petri dishes, PS | Outer diam. mm: 60, Description: without vents, sterile, Height approx. mm: 14
LLG-Petri dishes, PS | Outer diam. mm: 60, Description: without vents, sterile, Height approx. mm: 14
Brand: LLG LabwareAvailable in 9 variantsMade of high quality optical clear polystyrene. Produced under aseptic conditions in an ISO 6 cleanroom.With a smooth surface for an optimal distribution of the transport mediumStable thickness to prevent any deformations while usingStackableWith or without ventsAseptic (Ø 90 mm), non-sterile (Ø 60 mm) or beta irradiated sterile versions (all sizes)Packed in sleeves á 10 dishes or 20 dishes (Ø 90 mm)For research and development only.
€157,30
Magnetic microtube boxes
Magnetic microtube boxes
Brand: Scientific Industries, Inc.Available in 2 variantsBox with lid for holding microtubes. The box can be attached to the magnetic platform.
€53,00
Material test chamber FP series | Type: FP 56, Nominal capacity: 60 l, Temp. range °C: Amb. + 10 °C ... 300 °C
Material test chamber FP series | Type: FP 56, Nominal capacity: 60 l, Temp. range °C: Amb. + 10 °C ... 300 °C
Brand: BINDER GmbHAvailable in 10 variantsThe material test chambers with mechanical convection reliably ensure short drying times and fast heating. Thanks to programme functions and adjustable fan, temperature and recirculation conditions can be individually controlled even over a longer period of time.High temperature accuracy due to APT.line™ technologyAdjustable fan speedController with interval and real-time programmingUser-friendly controller with large displayElectromechanical control of the exhaust air flapClass 2 independent adjustable temperature safety device (DIN 12880) and class 3.1 independent temperature safety device (DIN 12880) with visual/acoustic alarm selectable on controllerModels up to 115 l stackableErgonomic handle designComputer interface: EthernetInternal data logger, measured values can be read out in open format via USB
€3.270,00
MaxQ 4000, Orbital Shaker with a Spacious Chamber | Type: MaxQ 4000, Refrigerated Bench-Top-Shaker incubated, digital, Load capacity kg: 22.7
MaxQ 4000, Orbital Shaker with a Spacious Chamber | Type: MaxQ 4000, Refrigerated Bench-Top-Shaker incubated, digital, Load capacity kg: 22.7
Brand: Thermo Elect.LED GmbH (Kendro)Available in 3 variantsSpacious chamber holds six 2L flasks.View speed, time and temperature simultaneously.Choose from three temperature ranges.Clear lid allows sample viewing without disturbing chamber atmosphere.Choice of analog or digital operating systems.Triple eccentric drive handles heavy loads, provides uniform agitation and continuous 24-hour operation, even at high speeds.View speed, operating time and temperature simultaneously on three individual LED displays.User-adjustable speed calibrationUnbalanced load sensorSoft start featureOver-temperature safety feature with independent thermostat provides additional backup by controlling heat if main temperature controller fails.Five year warranty on parts, one year labor and LIFETIME on mechanism.Also available with analog operating system.Platforms and clamps -please order separately.
€13.694,72
MaxQ 4450 Compact Benchtop Incubated Shakers, orbital | Type: MaxQ 4450, Benchtop Incubated Shaker, digital, Temp. range °C: RT + 5 ... 80
MaxQ 4450 Compact Benchtop Incubated Shakers, orbital | Type: MaxQ 4450, Benchtop Incubated Shaker, digital, Temp. range °C: RT + 5 ... 80
Brand: Thermo Elect.LED GmbH (Kendro)Holds up to 4 x 1L flasksRequires minimal bench spaceClear lid lets you view samples without disturbing internal temperatureTriple eccentric drive handles heavy loads, provides uniform agitation and continuous 24-hour operation, even at high speedsMonitor and control chamber temperature range with ±0.1 °C accuracy and ±0.5 °C uniformity at 37 °CView speed, operating time and temperature simultaneously on three individual LED displaysVisual/audible alarms alert you to temperature deviations. Heat turns off if temperature deviates ±1 °C of set pointSoft start feature eliminates sudden starts and stops, splashing of vessel contents or wetting of flask closureRetains parameters during power failure and restarts unit automatically after power is restoredOver-temperature safety feature with independent thermostat provides additional backup by controlling heat if main temperature controller failsSafety interlock stops platform motion when lid is opened5 year warranty and 10 year on drive mechanism
€7.706,40
MaxQ 6000 Incubated and Refrigerated Stackable Shakers, orbital | Type: MaxQ 6000, Stackable Incubated Floor Shaker, digital, Load capacity kg: 15.9
MaxQ 6000 Incubated and Refrigerated Stackable Shakers, orbital | Type: MaxQ 6000, Stackable Incubated Floor Shaker, digital, Load capacity kg: 15.9
Brand: Thermo Elect.LED GmbH (Kendro)Available in 2 variantsAvailable in incubated or refrigerated models.Units can be stacked two high on the floor with the stacking kit accessory.Two adjustable-height shelves provide added storage.Large viewing window and internal light offer sample visibility.View temperature, speed and time simultaneously on three individual displays.Door can be hinged from the right or left by the user for convenient placement in lab.Triple eccentric drive handles heavy loads, provides uniform agitation and continuous 24-hour operation, even at high speeds.Visual/audible alarms alert you to temperature deviations. Heat turns off if temperature deviates ±1°C of set point.Shaker shut down and visual/audible alarms signal if unit operates ±10% of set speed, preventing shaker from moving.Unbalanced load sensor stops platform motion when excess vibration is detected visual/audio alarms signal until condition is corrected.Soft start feature eliminates sudden starts and stops, splashing of vessel contents or wetting of flask closure.Retains parameters during power failure and restarts unit automatically after power is restored.Over-temperature safety feature with independent thermostat provides additional backup by controlling heat if main temperature controller fails.Safety interlock stops shaking motion when the door is open.5 year warranty and 10 year on drive mechanism.
€13.800,00
MaxQ 8000 Incubated and Refrigerated Stackable Shakers | Type: MaxQ 8000 Incubated shaker, Load capacity kg: 16.1
MaxQ 8000 Incubated and Refrigerated Stackable Shakers | Type: MaxQ 8000 Incubated shaker, Load capacity kg: 16.1
Brand: Thermo Elect.LED GmbH (Kendro)Available in 2 variantsCan be Stacked Two to Three High on the Floor for Space SavingsChoose from two temperature ranges to fulfill a number of molecular biology applications.HEPA filter ensures air inside the chamber remains clean and reduces cross contamination improving culturing conditions.Slide out platform provides convenient 100% sample access.Crevice-free Type 304 stainless steel chamber with coved corners and built-in drain keeps spills within the work area and promotes easy cleaning.Chamber is tall enough to accommodate 2L Erlenmeyer flasks.Top platform height is under 61.0 in. (154.9 cm) when units are stacked three high, ensuring ease-of-use and convenient accessibility.Easy to clean platforms are constructed of 5/16 in., heavy duty brushed anodized aluminum, which does not chip or rust.Large viewing window and internal xenon light allow sample visibility minimizing the need to open the chamber door.Electronic components and HEPA filter are easily accessed from the front of the unit, eliminating the need to move the shaker during regular maintenance or service.5 year warranty and 10 year on drive mechanism.For a complete system order:1. Shaker, 2. Platform, 3. Clamps
€19.400,00
Metal-cased heating mantles series KM-M, without controller | Capacity ml: 6000, Flask diam. mm: 236, Power W: 1000
Metal-cased heating mantles series KM-M, without controller | Capacity ml: 6000, Flask diam. mm: 236, Power W: 1000
Brand: ISOHEAT GmbHAvailable in 12 variantsLabHEAT® - Heating mantles for flasks, round bottom. Flexible glass yarn heating element in plastic coated, chemical-resistant metal housing with built-in power-on and heating zone switch; max. heating element temperature 450°C; 1.5m power supply (earthed) cable and RCD (residual current detection); nominal voltage 230V AC.
€667,00
Metal-cased heating mantles series KM-ME, with controller | Capacity ml: 500, Flask diam. mm: 105, Power W: 200
Metal-cased heating mantles series KM-ME, with controller | Capacity ml: 500, Flask diam. mm: 105, Power W: 200
Brand: ISOHEAT GmbHAvailable in 12 variantsLabHEAT® - Heating mantles for flasks, round bottom. Flexible glass yarn heating element in plastic coated, chemical-resistant metal housing with built-in power-on and heating zone switch, in addition equipped with a controller which allows a continuous adjustment of the heater power; max. heating element temperature 450°C; 1.5m power supply (earthed) cable and RCD (residual current detection); nominal voltage 230V AC.
€345,00
Metal-cased heating mantles series KM-MHB | Capacity ml: 400, Flask diam. mm: 70, Power W: 200
Metal-cased heating mantles series KM-MHB | Capacity ml: 400, Flask diam. mm: 70, Power W: 200
Brand: ISOHEAT GmbHAvailable in 2 variantsLabHEAT® - Heating mantles for high form beakers. Flexible glass yarn heating element in plastic coated, chemical-resistant metal housing, with built-in power-on and heating zone switch, max. heating element temperature 450 °C; 1.5 m power supply (earthed) cable and RCD (residual current detection); nominal voltage 230 V AC.
€455,00
Metal-cased heating mantles series KM-MNB | Capacity ml: 600, Flask diam. mm: 90, Power W: 260
Metal-cased heating mantles series KM-MNB | Capacity ml: 600, Flask diam. mm: 90, Power W: 260
Brand: ISOHEAT GmbHAvailable in 5 variantsLabHEAT® - Heating mantles for low form beakers. Flexible glass yarn heating element in plastic coated, chemical-resistant metal housing, with built-in power-on and heating zone switch, max. heating element temperature 450 °C; 1.5 m power supply (earthed) cable and RCD (residual current detection); nominal voltage 230 V AC.
€403,00

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.