Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

243244245246247248
Diagnostic slides without adhesion coating | Colour: Black, Ø mm: 6.0, No. of chambers: 8
Diagnostic slides without adhesion coating | Colour: Black, Ø mm: 6.0, No. of chambers: 8
Brand: Epredia Netherlands BVAvailable in 10 variants75mm x 25mm x 1.0mm, with 90° ground edges.
€98,02
Diagnostic slides | Colour: Black, No. of chambers: 6, Ø mm: 8
Diagnostic slides | Colour: Black, No. of chambers: 6, Ø mm: 8
Brand: Paul Marienfeld GmbH & Co. KGAvailable in 3 variantsWith well wettable reaction wells and epoxy resin colour masks with high resistance against solvents. Available in black, blue, green, red and white colour.Made of soda lime glass of third hydrolytic classIn compliance with DIN ISO 8037/1With 90° ground edgesWith frosted marking area of approx. 20 mm on one sidePre-cleaned and ready for useAutoclavable
€80,90
Diagonal blade stirring rotors, 4-blade, stainless steel 1.4404 | Ø agitator mm: 100, Ø agitator shaft mm: 10, Length mm: 550
Diagonal blade stirring rotors, 4-blade, stainless steel 1.4404 | Ø agitator mm: 100, Ø agitator shaft mm: 10, Length mm: 550
Brand: Buddeberg GmbHThe 4-blade diagonal blade stirring rotor provides axial flow and creates increasing shear forces at higher stirring speeds. Recommended for medium to high speed operations.Other sizes available on request.
€105,40
Dialysis Device Float-A-Lyzer G2 | Type: Float-A-Lyzer, 300 kD MWCO, Volume ml: 5
Dialysis Device Float-A-Lyzer G2 | Type: Float-A-Lyzer, 300 kD MWCO, Volume ml: 5
Brand: Repligen Europe B.V.Available in 7 variantsReady-to-use dialysis device with screw cap for ultimate convenience for small volume dialysis. Easy loading and recovery. No needles, closures, knots, buoys, pontoons, or weights required. Made with Biotech CE membrane in 9 MWCO's (0.1 to 1000 kD) and 3 volume sizes (1, 5 and 10 ml).
€200,00
Dialysis Tubing Biotech Cellulose Ester (CE) | Type: Biotech CE, 100 kD MWCO, Flat width mm: 24
Dialysis Tubing Biotech Cellulose Ester (CE) | Type: Biotech CE, 100 kD MWCO, Flat width mm: 24
Brand: Repligen Europe B.V.Available in 8 variantsBiologically inert and ultra-pure, Biotech CE is available in the largest selection of concise MWCOs (0.1 to 1000 kD) and sizes to provide better molecular separation for desalting, isolating ionic species and macromolecular purifications. Moderate chemical compatibility tolerates weak or dilute acids or bases and mild alcohols with only a slight change to the MWCO. Not for use with organic solvents. Use with pH 2 to 9 and temperature 4 to 37 °C.
€640,00
Dialysis tubing closures Spectra/Por, PP | Description: Dialysis tubing closures with weight, Up to Flat width mm: 55, Colour: White
Dialysis tubing closures Spectra/Por, PP | Description: Dialysis tubing closures with weight, Up to Flat width mm: 55, Colour: White
Brand: Repligen Europe B.V.Available in 13 variantsStandard and Weighted Spectra/Por Closures provide a leak-proof seal for dialysis tubing while aiding in sample buoyancy and vertical orientation. They are available in 23, 35, 55, 75 and 90 mm sealing widths and a variety of colors for easy sample identification. Closures are autoclavable.
€156,00
Diaphragm pump MPC 101 Z | Type : MPC 101 Z, Ultimate vacuum mbar (abs). : 8, Flow rate l / min. : 18
Diaphragm pump MPC 101 Z | Type : MPC 101 Z, Ultimate vacuum mbar (abs). : 8, Flow rate l / min. : 18
Brand: Gardner Denver Thomas GmbHThe two-stage pump is designed for pumping and compressing gases and vapours and generate vacuum e.g. for rotary evaporators, vacuum ovens and vacuum filtration. Their electrical conductivity prevents electrostatic charging and minimizes the risk of the gas mixture igniting inside the pump.For tubes with ID = 8 mmChemically resistantResistant to aggressive solvents and acid vapoursElastomer diaphragms with PTFE layerPump and connection heads are carbon fibre reinforcedIntegrated motor protection switchVibration isolating feetScope of delivery: 2-head chemical diaphragm pump, external power supply and device connection cable with plug (EU, UK).
€1.366,00
Diaphragm pump MPC 301 Z | Type : MPC 301 Z, Ultimate vacuum mbar (abs). : 8, Flow rate l / min. : 41
Diaphragm pump MPC 301 Z | Type : MPC 301 Z, Ultimate vacuum mbar (abs). : 8, Flow rate l / min. : 41
Brand: Gardner Denver Thomas GmbHThe two-stage pump is designed for pumping and compressing gases and vapours and generate vacuum e.g. for rotary evaporators, vacuum ovens and gel dryers. Their electrical conductivity prevents electrostatic charging and minimizes the risk of the gas mixture igniting inside the pump.For tubes with ID = 8 mmChemically resistantResistant to aggressive solvents and acid vapoursElastomer diaphragms with PTFE layerPump and connection heads are carbon fibre reinforcedIntegrated motor protection switchVibration isolating feetScope of delivery: 2-head chemical diaphragm pump, external power supply and device connection cable with plug (EU, UK).
€1.755,00
Diaphragm pump MPC 601 T | Type : MPC 601 T, Supply requirements V : 230, Ultimate vacuum mbar (abs). : 2
Diaphragm pump MPC 601 T | Type : MPC 601 T, Supply requirements V : 230, Ultimate vacuum mbar (abs). : 2
Brand: Gardner Denver Thomas GmbHThe three-stage pump is designed for pumping and compressing gases and vapours and generate vacuum e.g. for rotary evaporators, vacuum ovens and turbomolecular pumps. Their electrical conductivity prevents electrostatic charging and minimizes the risk of the gas mixture igniting inside the pump.For tubes with ID = 8 mmChemically resistantResistant to aggressive solvents and acid vapoursElastomer diaphragms with PTFE layerPump and connection heads are carbon fibre reinforcedIntegrated motor protection switchVibration isolating feetScope of delivery: 4-head chemical diaphragm pump, external power supply and device connection cable with plug (EU, UK).
€3.495,00
Diaphragm pumps chemistry design, MD 1C | Type: MD 1C, Flow rate: 1.3 m³/h, Ultimate vacuum: 2 mbar
Diaphragm pumps chemistry design, MD 1C | Type: MD 1C, Flow rate: 1.3 m³/h, Ultimate vacuum: 2 mbar
Brand: Vacuubrand GmbH & Co.KGAvailable in 3 variantsThe diaphragm pumps ME 1C offer a compact and high performance solution. With their easy-to-use functionality, they are the perfect partner for both single and multiple filtrations.One-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases and vapors for modest vacuum requirements. In contrast to water-jet pumps, they do not consume water and therefore do not produce any contaminated waste water in daily use.Vacuum filtration is frequently used for sample preparation in chemistry, microbiology, waste water control and analysis.In the chemistry diaphragm pumps ("C") all major parts in contact with pumped media are made of chemically resistant fluoroplastics. The ME 1C is also often used for solid phase extraction (SPE).An optional manual regulator valve with dial gauge enables variable fine adjustment of the pumping speed and the ultimate vacuum.Gas ballast for reliable pump performance.Two up to four stage chemistry diaphragm pumps (letters in the product name Z, D or V) are equipped with a manual gas ballast valve as standard. The supply of gas ballast minimizes the risk of condensation inside the pump.
€2.940,00
Diaphragm pumps chemistry design, ME 1C, MZ 1C, MD 1C | Type: ME 1C, Dimensions (W x D x H) mm: 247 x 121 x 145, Flow rate (50/60Hz) L / min.: 11.66 / 14.16
Diaphragm pumps chemistry design, ME 1C, MZ 1C, MD 1C | Type: ME 1C, Dimensions (W x D x H) mm: 247 x 121 x 145, Flow rate (50/60Hz) L / min.: 11.66 / 14.16
Brand: Vacuubrand GmbH & Co.KGAvailable in 11 variantsThe diaphragm pumps ME 1C offer a compact and high performance solution. With their easy-to-use functionality, they are the perfect partner for both single and multiple filtrations.One-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases and vapors for modest vacuum requirements. In contrast to water-jet pumps, they do not consume water and therefore do not produce any contaminated waste water in daily use.Vacuum filtration is frequently used for sample preparation in chemistry, microbiology, waste water control and analysis.In the chemistry diaphragm pumps ("C") all major parts in contact with pumped media are made of chemically resistant fluoroplastics. The ME 1C is also often used for solid phase extraction (SPE).An optional manual regulator valve with dial gauge enables variable fine adjustment of the pumping speed and the ultimate vacuum.Gas ballast for reliable pump performance.Two up to four stage chemistry diaphragm pumps (letters in the product name Z, D or V) are equipped with a manual gas ballast valve as standard. The supply of gas ballast minimizes the risk of condensation inside the pump.
€985,00
Diaphragm pumps chemistry design, MZ 1C | Type: MZ 1C, Flow rate: 0.75 m³/h, Ultimate vacuum: 12 mbar
Diaphragm pumps chemistry design, MZ 1C | Type: MZ 1C, Flow rate: 0.75 m³/h, Ultimate vacuum: 12 mbar
Brand: Vacuubrand GmbH & Co.KGAvailable in 4 variantsThe diaphragm pumps ME 1C offer a compact and high performance solution. With their easy-to-use functionality, they are the perfect partner for both single and multiple filtrations.One-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases and vapors for modest vacuum requirements. In contrast to water-jet pumps, they do not consume water and therefore do not produce any contaminated waste water in daily use.Vacuum filtration is frequently used for sample preparation in chemistry, microbiology, waste water control and analysis.In the chemistry diaphragm pumps ("C") all major parts in contact with pumped media are made of chemically resistant fluoroplastics. The ME 1C is also often used for solid phase extraction (SPE).An optional manual regulator valve with dial gauge enables variable fine adjustment of the pumping speed and the ultimate vacuum.Gas ballast for reliable pump performance.Two up to four stage chemistry diaphragm pumps (letters in the product name Z, D or V) are equipped with a manual gas ballast valve as standard. The supply of gas ballast minimizes the risk of condensation inside the pump.
€1.710,00
243244245246247248

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.