Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

252627282930
Stand for Synthesis reactors EasySyn Advanced and Starter | Width mm: 500, Depth mm: 580, Height mm: 1050
Stand for Synthesis reactors EasySyn Advanced and Starter | Width mm: 500, Depth mm: 580, Height mm: 1050
Brand: IKA-Werke GmbH & Co.KGSpecially designed stand system for use with reactor systems EasySyn.Quick, easy exchange of reactor vesselsSimple alignment of the overhead stirrerAdjustment of the working height
€3.626,70
Standard ground joint stoppers, PP | Description: With octagonal-knob cap, NS: 45/40
Standard ground joint stoppers, PP | Description: With octagonal-knob cap, NS: 45/40
Brand: VITLAB GmbHAvailable in 10 variantsCap with red core. Autoclavable.
€3,83
Stillheads, ground glass joint, with integral Liebig condenser | Description: Without vacuum receiver adapter, Effective length mm: 400, Cone NS: 29/32
Stillheads, ground glass joint, with integral Liebig condenser | Description: Without vacuum receiver adapter, Effective length mm: 400, Cone NS: 29/32
Brand: ISOLAB Laborgeräte GmbHAvailable in 8 variantsManufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals. With liebig condenser and socket NS 14/23 for distillation thermometers. Available with or without vacuum receiver adapter.
€138,26
Stirrer bearings with cooling jacket, DURAN® tubing | For diam. stirring rod mm: 10, Cone NS: 29/32
Stirrer bearings with cooling jacket, DURAN® tubing | For diam. stirring rod mm: 10, Cone NS: 29/32
Brand: Lenz-Laborglas GmbH & Co. KGAvailable in 2 variantsMade of DURAN® tubing. Stirrer bearings with NS cone and cooling water connections (thread GL14), bearing surface ground and polished.
€178,64
Stirrer bearings with dynamic double seal | For diam. stirring rod mm: 10, NS: 45/40
Stirrer bearings with dynamic double seal | For diam. stirring rod mm: 10, NS: 45/40
Brand: Lenz-Laborglas GmbH & Co. KGAvailable in 4 variantsStirrer bearings for applications under vacuum or under slight overpressure. With extended guidance for reduced vibrations and a longer lifetime. Material: borosilicate glass 3.3 (closure), PTFE (sealings)
€354,23
Stirrer bearings with GL male thread, DURAN® tubing | Ø agitator shaft mm: 16, Length mm: 85 ± 3, Thread GL: 32
Stirrer bearings with GL male thread, DURAN® tubing | Ø agitator shaft mm: 16, Length mm: 85 ± 3, Thread GL: 32
Brand: Lenz-Laborglas GmbH & Co. KGAvailable in 3 variantsMade of DURAN® tubing. Other materials used: PTFE (bearing), silicone (gasket) and stirrer guides, GL male thread. Cone size 29/32. Guide bore 10mm i.d.
€168,06
Stirrer bearings, PTFE for Reactor lids | Thread: 1/2'', Ø agitator shaft mm: 8, Thread GL: 25
Stirrer bearings, PTFE for Reactor lids | Thread: 1/2'', Ø agitator shaft mm: 8, Thread GL: 25
Brand: Bohlender GmbHAvailable in 3 variantsWith NPT screw thread. Universal chemical resistance. With special gasket made of PTFE and an FPM o-ring for optimal compression of the GL screw cap made of PPS. The media is only exposed to PTFE. With hexagonal gripping surface in standard wrench size. Temperature resistant from -15 to 200 °C.
€96,01
Stirrer Bearings, PTFE | For diam. stirring rod mm: 10, Overall length mm: 80, Thread GL: 25
Stirrer Bearings, PTFE | For diam. stirring rod mm: 10, Overall length mm: 80, Thread GL: 25
Brand: Bohlender GmbHAvailable in 9 variantsThe sealing rings on these bearings ensure a perfect sealing. The ground joint no longer sticks, the danger of breaking is reduced and the cone can be removed easily from the socket. A special gasket made of PTFE and an FPM o-ring which is compressed by a GL screw cap provide a good sealing of the stirrer shaft. This gasket can be exchanged after wearing. Suitable for vacuum, perfect bearing for stainless steel, glass and BOLA Stirrer Shafts.
€54,78
Stirrer with stirrer bearings, DURAN® tubing | Type: Closure, thread GL 25, cone NS 29/32
Stirrer with stirrer bearings, DURAN® tubing | Type: Closure, thread GL 25, cone NS 29/32
Brand: Lenz-Laborglas GmbH & Co. KGAvailable in 8 variantsMade of DURAN® tubing. For round bottom flasks 250 to 2000ml. Stirrer shaft, with PTFE stirrer blade and fixing screw. Seals vacuum stirring apparatus gas-tight to 10-3 mbar up to a permanent load of 800rpm.
€65,40
Stirrers with PTFE blade and journal | Description: KPG-stirrer with PTFE stirring blade NS 45/40, for flask 4000 ml
Stirrers with PTFE blade and journal | Description: KPG-stirrer with PTFE stirring blade NS 45/40, for flask 4000 ml
Brand: Lenz-Laborglas GmbH & Co. KGAvailable in 20 variantsMade of precision calibrated glass tube, ground and polished bearing surface, shaft dia.: 10 mm, journal: dia. 8 x L 40 mm, with snap-fastener for replacement of PTFE blades, blade: PTFE (punched), shaft: made of DURAN® tubing.
€88,17
Stopcock grease, silicone-free | Weight: 30 g
Stopcock grease, silicone-free | Weight: 30 g
Brand: BRAND GMBH + CO.KGFor lubricating burette stopcocksGood acid- and base-resistanceOperating temperature range -40 to 320 ºC
€43,40
Stopcocks, with glass plug, borosilicate glass 3.3 | Description: With solid glass key, NS: 14.5, Bore mm: 2.5
Stopcocks, with glass plug, borosilicate glass 3.3 | Description: With solid glass key, NS: 14.5, Bore mm: 2.5
Brand: Lenz-Laborglas GmbH & Co. KGAvailable in 18 variantsAcc to DIN 12541-1 and in addition to DIN standard. With solid glass plug and retaining device. Straight bore. Leakage rate acc. to DIN 12540-1.
€23,83
252627282930

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.