Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

Peter Huber Kältemaschinenbau
123456
Circulation Heat Exchanger HTS | Type: HTS 1, Working Temp. range °C: 5 ... 80, Pump max. l/min / bar: 8 / 0.2
Circulation Heat Exchanger HTS | Type: HTS 1, Working Temp. range °C: 5 ... 80, Pump max. l/min / bar: 8 / 0.2
Brand: Peter Huber KältemaschinenbauAvailable in 4 variantsHeat exchanger systems with circulation pump for connection to cooling water on the primary side. The devices provide a cooling circuit with stable pressure/ ow and adjustable operating temperature. The cooling capacity is generated using a plate heat exchanger via the cooling water. Since there is no active cooling machine, the devices operate in a quiet and energy-saving manner and are a cost-effective alternative to conventional chillers e.g. for the temperature control of Peltier elements, bioreactors, etc.The model HTS 1 contains the heat exchanger system, however it does not have any temperature control. The device is therefore suited for applications with low requirements for control accuracy.Effcient circulation pumpTemperature stability ±0.1 KRS232 interfacePt100 external sensor connectionLow cooling water usageApplication protection with cooling stage separation
€1.500,00
Circulation Heat Exchanger HTS | Type: HTS 3, Working Temp. range °C: 3 ... 95, Pump max. l/min / bar: 33 / 0.7
Circulation Heat Exchanger HTS | Type: HTS 3, Working Temp. range °C: 3 ... 95, Pump max. l/min / bar: 33 / 0.7
Brand: Peter Huber KältemaschinenbauAvailable in 4 variantsHeat exchanger systems with circulation pump for connection to cooling water on the primary side. The devices provide a cooling circuit with stable pressure/ ow and adjustable operating temperature. The cooling capacity is generated using a plate heat exchanger via the cooling water. Since there is no active cooling machine, the devices operate in a quiet and energy-saving manner and are a cost-effective alternative to conventional chillers e.g. for the temperature control of Peltier elements, bioreactors, etc.The model HTS 1 contains the heat exchanger system, however it does not have any temperature control. The device is therefore suited for applications with low requirements for control accuracy.Effcient circulation pumpTemperature stability ±0.1 KRS232 interfacePt100 external sensor connectionLow cooling water usageApplication protection with cooling stage separation
€5.790,00
Circulation Heat Exchanger HTS | Type: HTS 5, Working Temp. range °C: 3 ... 95, Pump max. l/min / bar: 25 / 2.5
Circulation Heat Exchanger HTS | Type: HTS 5, Working Temp. range °C: 3 ... 95, Pump max. l/min / bar: 25 / 2.5
Brand: Peter Huber KältemaschinenbauAvailable in 4 variantsHeat exchanger systems with circulation pump for connection to cooling water on the primary side. The devices provide a cooling circuit with stable pressure/ ow and adjustable operating temperature. The cooling capacity is generated using a plate heat exchanger via the cooling water. Since there is no active cooling machine, the devices operate in a quiet and energy-saving manner and are a cost-effective alternative to conventional chillers e.g. for the temperature control of Peltier elements, bioreactors, etc.The model HTS 1 contains the heat exchanger system, however it does not have any temperature control. The device is therefore suited for applications with low requirements for control accuracy.Effcient circulation pumpTemperature stability ±0.1 KRS232 interfacePt100 external sensor connectionLow cooling water usageApplication protection with cooling stage separation
€6.970,00
Circulation Heat Exchanger HTS | Type: HTS 6, Working Temp. range °C: 3 ... 95, Pump max. l/min / bar: 25 / 2.5
Circulation Heat Exchanger HTS | Type: HTS 6, Working Temp. range °C: 3 ... 95, Pump max. l/min / bar: 25 / 2.5
Brand: Peter Huber KältemaschinenbauAvailable in 4 variantsHeat exchanger systems with circulation pump for connection to cooling water on the primary side. The devices provide a cooling circuit with stable pressure/ ow and adjustable operating temperature. The cooling capacity is generated using a plate heat exchanger via the cooling water. Since there is no active cooling machine, the devices operate in a quiet and energy-saving manner and are a cost-effective alternative to conventional chillers e.g. for the temperature control of Peltier elements, bioreactors, etc.The model HTS 1 contains the heat exchanger system, however it does not have any temperature control. The device is therefore suited for applications with low requirements for control accuracy.Effcient circulation pumpTemperature stability ±0.1 KRS232 interfacePt100 external sensor connectionLow cooling water usageApplication protection with cooling stage separation
€8.280,00
Compact refrigerated circulators - Ministat® | Type: Ministat® 125, Bath capacity L: 2.75/1.3*, Dimensions (W x D x H) mm: 225 x 370 x 429
Compact refrigerated circulators - Ministat® | Type: Ministat® 125, Bath capacity L: 2.75/1.3*, Dimensions (W x D x H) mm: 225 x 370 x 429
Brand: Peter Huber KältemaschinenbauAvailable in 6 variantsExceptionally compact and powerful, Ministats have been the smallest cooling circulators in the world since 1976. Their compact form allows them to be placed in small spaces, e.g. in a laboratory extraction hood. Compliance with DIN 12876, class 3 allows them to be used unsupervised in continual operation. The maximum ambient temperature is 40 °C.The powerful variable speed pressure/suction pump can thermoregulate objects in the bath or external applications. The maximum pressure can be controlled using an optional pressure sensor - VPC (Variable Pressure Control) - which protects delicate glassware. The small volume and high power of the Ministats means exceptionally rapid heating and cooling rates are achieved. Optional displacement inserts reduce the bath volume by approximately 50 % amplifying this effect and reducing moisture absorption in the thermal fluid. All models have Active Cooling Control for cooling power control at the maximum working temperature and an automatic cooling power regulation for energy saving operation and reduced heat dissipation into the lab.The bath opening is large enough to allow small objects to be thermoregulated within. All parts in contact with the thermal fluid are made of stainless steel or Polycarbonate.Ministats have the Pilot ONE with Plug & Play technology (proven since 1980). In the event of service the controller can be simply swapped. Using a data cable the Ministat can be remotely controlled. The Pilot ONE has a state of the art microprocessor controller and a high precision temperature measurement system for exact and reproducible temperature control. The functionality and TFT-display are supported by Easy Control.Typical applications for the smallest cooling circulator in the world are external closed systems e.g. photometer, refractometer and viscosimeter.
€5.990,00
Compact refrigerated circulators - Ministat® | Type: Ministat® 125w, Bath capacity L: 2.75/1.3*, Dimensions (W x D x H) mm: 225 x 370 x 429
Compact refrigerated circulators - Ministat® | Type: Ministat® 125w, Bath capacity L: 2.75/1.3*, Dimensions (W x D x H) mm: 225 x 370 x 429
Brand: Peter Huber KältemaschinenbauAvailable in 6 variantsExceptionally compact and powerful, Ministats have been the smallest cooling circulators in the world since 1976. Their compact form allows them to be placed in small spaces, e.g. in a laboratory extraction hood. Compliance with DIN 12876, class 3 allows them to be used unsupervised in continual operation. The maximum ambient temperature is 40 °C.The powerful variable speed pressure/suction pump can thermoregulate objects in the bath or external applications. The maximum pressure can be controlled using an optional pressure sensor - VPC (Variable Pressure Control) - which protects delicate glassware. The small volume and high power of the Ministats means exceptionally rapid heating and cooling rates are achieved. Optional displacement inserts reduce the bath volume by approximately 50 % amplifying this effect and reducing moisture absorption in the thermal fluid. All models have Active Cooling Control for cooling power control at the maximum working temperature and an automatic cooling power regulation for energy saving operation and reduced heat dissipation into the lab.The bath opening is large enough to allow small objects to be thermoregulated within. All parts in contact with the thermal fluid are made of stainless steel or Polycarbonate.Ministats have the Pilot ONE with Plug & Play technology (proven since 1980). In the event of service the controller can be simply swapped. Using a data cable the Ministat can be remotely controlled. The Pilot ONE has a state of the art microprocessor controller and a high precision temperature measurement system for exact and reproducible temperature control. The functionality and TFT-display are supported by Easy Control.Typical applications for the smallest cooling circulator in the world are external closed systems e.g. photometer, refractometer and viscosimeter.
€6.190,00
Compact refrigerated circulators - Ministat® | Type: Ministat® 230, Bath capacity L: 3.2/1.7*, Dimensions (W x D x H) mm: 255 x 450 x 476
Compact refrigerated circulators - Ministat® | Type: Ministat® 230, Bath capacity L: 3.2/1.7*, Dimensions (W x D x H) mm: 255 x 450 x 476
Brand: Peter Huber KältemaschinenbauAvailable in 6 variantsExceptionally compact and powerful, Ministats have been the smallest cooling circulators in the world since 1976. Their compact form allows them to be placed in small spaces, e.g. in a laboratory extraction hood. Compliance with DIN 12876, class 3 allows them to be used unsupervised in continual operation. The maximum ambient temperature is 40 °C.The powerful variable speed pressure/suction pump can thermoregulate objects in the bath or external applications. The maximum pressure can be controlled using an optional pressure sensor - VPC (Variable Pressure Control) - which protects delicate glassware. The small volume and high power of the Ministats means exceptionally rapid heating and cooling rates are achieved. Optional displacement inserts reduce the bath volume by approximately 50 % amplifying this effect and reducing moisture absorption in the thermal fluid. All models have Active Cooling Control for cooling power control at the maximum working temperature and an automatic cooling power regulation for energy saving operation and reduced heat dissipation into the lab.The bath opening is large enough to allow small objects to be thermoregulated within. All parts in contact with the thermal fluid are made of stainless steel or Polycarbonate.Ministats have the Pilot ONE with Plug & Play technology (proven since 1980). In the event of service the controller can be simply swapped. Using a data cable the Ministat can be remotely controlled. The Pilot ONE has a state of the art microprocessor controller and a high precision temperature measurement system for exact and reproducible temperature control. The functionality and TFT-display are supported by Easy Control.Typical applications for the smallest cooling circulator in the world are external closed systems e.g. photometer, refractometer and viscosimeter.
€6.070,00
Compact refrigerated circulators - Ministat® | Type: Ministat® 230w, Bath capacity L: 3.2/1.7*, Dimensions (W x D x H) mm: 255 x 450 x 476
Compact refrigerated circulators - Ministat® | Type: Ministat® 230w, Bath capacity L: 3.2/1.7*, Dimensions (W x D x H) mm: 255 x 450 x 476
Brand: Peter Huber KältemaschinenbauAvailable in 6 variantsExceptionally compact and powerful, Ministats have been the smallest cooling circulators in the world since 1976. Their compact form allows them to be placed in small spaces, e.g. in a laboratory extraction hood. Compliance with DIN 12876, class 3 allows them to be used unsupervised in continual operation. The maximum ambient temperature is 40 °C.The powerful variable speed pressure/suction pump can thermoregulate objects in the bath or external applications. The maximum pressure can be controlled using an optional pressure sensor - VPC (Variable Pressure Control) - which protects delicate glassware. The small volume and high power of the Ministats means exceptionally rapid heating and cooling rates are achieved. Optional displacement inserts reduce the bath volume by approximately 50 % amplifying this effect and reducing moisture absorption in the thermal fluid. All models have Active Cooling Control for cooling power control at the maximum working temperature and an automatic cooling power regulation for energy saving operation and reduced heat dissipation into the lab.The bath opening is large enough to allow small objects to be thermoregulated within. All parts in contact with the thermal fluid are made of stainless steel or Polycarbonate.Ministats have the Pilot ONE with Plug & Play technology (proven since 1980). In the event of service the controller can be simply swapped. Using a data cable the Ministat can be remotely controlled. The Pilot ONE has a state of the art microprocessor controller and a high precision temperature measurement system for exact and reproducible temperature control. The functionality and TFT-display are supported by Easy Control.Typical applications for the smallest cooling circulator in the world are external closed systems e.g. photometer, refractometer and viscosimeter.
€6.520,00
Compact refrigerated circulators - Ministat® | Type: Ministat® 240, Bath capacity L: 4.9/2.8*, Dimensions (W x D x H) mm: 300 x 465 x 516
Compact refrigerated circulators - Ministat® | Type: Ministat® 240, Bath capacity L: 4.9/2.8*, Dimensions (W x D x H) mm: 300 x 465 x 516
Brand: Peter Huber KältemaschinenbauAvailable in 6 variantsExceptionally compact and powerful, Ministats have been the smallest cooling circulators in the world since 1976. Their compact form allows them to be placed in small spaces, e.g. in a laboratory extraction hood. Compliance with DIN 12876, class 3 allows them to be used unsupervised in continual operation. The maximum ambient temperature is 40 °C.The powerful variable speed pressure/suction pump can thermoregulate objects in the bath or external applications. The maximum pressure can be controlled using an optional pressure sensor - VPC (Variable Pressure Control) - which protects delicate glassware. The small volume and high power of the Ministats means exceptionally rapid heating and cooling rates are achieved. Optional displacement inserts reduce the bath volume by approximately 50 % amplifying this effect and reducing moisture absorption in the thermal fluid. All models have Active Cooling Control for cooling power control at the maximum working temperature and an automatic cooling power regulation for energy saving operation and reduced heat dissipation into the lab.The bath opening is large enough to allow small objects to be thermoregulated within. All parts in contact with the thermal fluid are made of stainless steel or Polycarbonate.Ministats have the Pilot ONE with Plug & Play technology (proven since 1980). In the event of service the controller can be simply swapped. Using a data cable the Ministat can be remotely controlled. The Pilot ONE has a state of the art microprocessor controller and a high precision temperature measurement system for exact and reproducible temperature control. The functionality and TFT-display are supported by Easy Control.Typical applications for the smallest cooling circulator in the world are external closed systems e.g. photometer, refractometer and viscosimeter.
€7.490,00
Compact refrigerated circulators - Ministat® | Type: Ministat® 240w, Bath capacity L: 4.9/2.8*, Dimensions (W x D x H) mm: 300 x 465 x 516
Compact refrigerated circulators - Ministat® | Type: Ministat® 240w, Bath capacity L: 4.9/2.8*, Dimensions (W x D x H) mm: 300 x 465 x 516
Brand: Peter Huber KältemaschinenbauAvailable in 6 variantsExceptionally compact and powerful, Ministats have been the smallest cooling circulators in the world since 1976. Their compact form allows them to be placed in small spaces, e.g. in a laboratory extraction hood. Compliance with DIN 12876, class 3 allows them to be used unsupervised in continual operation. The maximum ambient temperature is 40 °C.The powerful variable speed pressure/suction pump can thermoregulate objects in the bath or external applications. The maximum pressure can be controlled using an optional pressure sensor - VPC (Variable Pressure Control) - which protects delicate glassware. The small volume and high power of the Ministats means exceptionally rapid heating and cooling rates are achieved. Optional displacement inserts reduce the bath volume by approximately 50 % amplifying this effect and reducing moisture absorption in the thermal fluid. All models have Active Cooling Control for cooling power control at the maximum working temperature and an automatic cooling power regulation for energy saving operation and reduced heat dissipation into the lab.The bath opening is large enough to allow small objects to be thermoregulated within. All parts in contact with the thermal fluid are made of stainless steel or Polycarbonate.Ministats have the Pilot ONE with Plug & Play technology (proven since 1980). In the event of service the controller can be simply swapped. Using a data cable the Ministat can be remotely controlled. The Pilot ONE has a state of the art microprocessor controller and a high precision temperature measurement system for exact and reproducible temperature control. The functionality and TFT-display are supported by Easy Control.Typical applications for the smallest cooling circulator in the world are external closed systems e.g. photometer, refractometer and viscosimeter.
€7.980,00
Compatible Control Refrigeration Circulators K6 | Type: CC-K6, Bath capacity L: 4.5, Dimensions (W x D x H) mm: 210 x 400 x 546
Compatible Control Refrigeration Circulators K6 | Type: CC-K6, Bath capacity L: 4.5, Dimensions (W x D x H) mm: 210 x 400 x 546
Brand: Peter Huber KältemaschinenbauAvailable in 4 variantsThe K6 models are compact refrigeration bath circulators for temperatures from -25 to 200°C. These units are a combination of a refrigerated bath and immersion circulator, in combination with an integrated pump they are suitable for external open (with level control) and closed applications. The CC-E immersion circulator with its suction / pressure pump is suitable to externally open and closed applications. The temperature stability is 0.02K for the Compatible Control models and 0.05K for the KISS models.
€4.480,00
Compatible Control Refrigeration Circulators K6 | Type: CC-K6s, Bath capacity L: 4.5, Dimensions (W x D x H) mm: 210 x 400 x 546
Compatible Control Refrigeration Circulators K6 | Type: CC-K6s, Bath capacity L: 4.5, Dimensions (W x D x H) mm: 210 x 400 x 546
Brand: Peter Huber KältemaschinenbauAvailable in 4 variantsThe K6 models are compact refrigeration bath circulators for temperatures from -25 to 200°C. These units are a combination of a refrigerated bath and immersion circulator, in combination with an integrated pump they are suitable for external open (with level control) and closed applications. The CC-E immersion circulator with its suction / pressure pump is suitable to externally open and closed applications. The temperature stability is 0.02K for the Compatible Control models and 0.05K for the KISS models.
€5.000,00
123456

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.