Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

Thermo Elect.LED GmbH (Kendro)
293031323334
Upright Freezers TSX Series, up to -86 °C | Type: TSX60086V, Capacity l: 816, External dimensions (W x D x H) mm: 1006 x 955 x 1981
Upright Freezers TSX Series, up to -86 °C | Type: TSX60086V, Capacity l: 816, External dimensions (W x D x H) mm: 1006 x 955 x 1981
Brand: Thermo Elect.LED GmbH (Kendro)Available in 4 variantsProtect your samples and reduce energy consumption with these environmentally friendly ultra-low freezers. Operating range -50 to -86 °C.Low maximum deviation of
€22.252,00
Upright Freezers TSX Series, up to -86 °C | Type: TSX70086V, Capacity l: 949, External dimensions (W x D x H) mm: 1148 x 955 x 1981
Upright Freezers TSX Series, up to -86 °C | Type: TSX70086V, Capacity l: 949, External dimensions (W x D x H) mm: 1148 x 955 x 1981
Brand: Thermo Elect.LED GmbH (Kendro)Available in 4 variantsProtect your samples and reduce energy consumption with these environmentally friendly ultra-low freezers. Operating range -50 to -86 °C.Low maximum deviation of
€24.188,00
Vacuum oven 6000 | Type: VT 6060 M, Nominal capacity l: 53, Max. grids: 4
Vacuum oven 6000 | Type: VT 6060 M, Nominal capacity l: 53, Max. grids: 4
Brand: Thermo Elect.LED GmbH (Kendro)Available in 8 variantsFor the careful, rapid drying and heat treatment of temperature sensitive substances and components in the electronics, pharmaceutical, cosmetic and biochemical industries.With electro-polished and internally welded, rectangular chamber made of 1.4571 stainless steel and silicone door seal. Also features analogue pressure display, stainless steel ball valve to control vacuum, rapid air ventilation valve, inert gas connection with pressure relief safety valve for controlled chamber purging and corrosion resistant vacuum fittings. Small flange (DN 25 KF) vacuum fittings are positioned on the rear panel of the cabinet. An overheat cut-out (Class 2) is supplied as standard. 53L models are supplied with two shelves, 128L models are supplied with three shelves.Type M, with heated jacket, range up to 200°C.Heat is conducted from the heated chamber through the shelves to the sample. The shelves are removeable. With Kelvitron® microprocessor temperature controller.Type P, with heated shelves, range up to 300°C (up to 400°C on request).Tubular heating elements in the shelves heat the sample directly, providing rapid heat-up and processing times. With individual shelf temperature control, a common temperature value is set for all plates. With Digicon® electronic temperature controller.Options for VT 6000:Inert gas connectionDigital pressure displayPressure controller with electronic valveViton door seal - TimersDigital sample temperature displayVariety of temperature controllersAnalogue interfaceMaximum temperature 400°C.Interface connection for central monitoringTemperature documentationCalibration certificateShelves - further options available on request. Fully equipped vacuum pump control station Vacucenter available as an accessory for Vacutherm 6060 and 6130 ovens. Choice of 3 different vacuum pumps available according to operating conditions.
€11.300,00
Vacuum oven 6000 | Type: VT 6060 M-BL, Nominal capacity l: 53, Max. grids: 4
Vacuum oven 6000 | Type: VT 6060 M-BL, Nominal capacity l: 53, Max. grids: 4
Brand: Thermo Elect.LED GmbH (Kendro)Available in 8 variantsFor the careful, rapid drying and heat treatment of temperature sensitive substances and components in the electronics, pharmaceutical, cosmetic and biochemical industries.With electro-polished and internally welded, rectangular chamber made of 1.4571 stainless steel and silicone door seal. Also features analogue pressure display, stainless steel ball valve to control vacuum, rapid air ventilation valve, inert gas connection with pressure relief safety valve for controlled chamber purging and corrosion resistant vacuum fittings. Small flange (DN 25 KF) vacuum fittings are positioned on the rear panel of the cabinet. An overheat cut-out (Class 2) is supplied as standard. 53L models are supplied with two shelves, 128L models are supplied with three shelves.Type M, with heated jacket, range up to 200°C.Heat is conducted from the heated chamber through the shelves to the sample. The shelves are removeable. With Kelvitron® microprocessor temperature controller.Type P, with heated shelves, range up to 300°C (up to 400°C on request).Tubular heating elements in the shelves heat the sample directly, providing rapid heat-up and processing times. With individual shelf temperature control, a common temperature value is set for all plates. With Digicon® electronic temperature controller.Options for VT 6000:Inert gas connectionDigital pressure displayPressure controller with electronic valveViton door seal - TimersDigital sample temperature displayVariety of temperature controllersAnalogue interfaceMaximum temperature 400°C.Interface connection for central monitoringTemperature documentationCalibration certificateShelves - further options available on request. Fully equipped vacuum pump control station Vacucenter available as an accessory for Vacutherm 6060 and 6130 ovens. Choice of 3 different vacuum pumps available according to operating conditions.
€16.500,00
Vacuum oven 6000 | Type: VT 6060 P, Nominal capacity l: 53, Max. grids: 2
Vacuum oven 6000 | Type: VT 6060 P, Nominal capacity l: 53, Max. grids: 2
Brand: Thermo Elect.LED GmbH (Kendro)Available in 8 variantsFor the careful, rapid drying and heat treatment of temperature sensitive substances and components in the electronics, pharmaceutical, cosmetic and biochemical industries.With electro-polished and internally welded, rectangular chamber made of 1.4571 stainless steel and silicone door seal. Also features analogue pressure display, stainless steel ball valve to control vacuum, rapid air ventilation valve, inert gas connection with pressure relief safety valve for controlled chamber purging and corrosion resistant vacuum fittings. Small flange (DN 25 KF) vacuum fittings are positioned on the rear panel of the cabinet. An overheat cut-out (Class 2) is supplied as standard. 53L models are supplied with two shelves, 128L models are supplied with three shelves.Type M, with heated jacket, range up to 200°C.Heat is conducted from the heated chamber through the shelves to the sample. The shelves are removeable. With Kelvitron® microprocessor temperature controller.Type P, with heated shelves, range up to 300°C (up to 400°C on request).Tubular heating elements in the shelves heat the sample directly, providing rapid heat-up and processing times. With individual shelf temperature control, a common temperature value is set for all plates. With Digicon® electronic temperature controller.Options for VT 6000:Inert gas connectionDigital pressure displayPressure controller with electronic valveViton door seal - TimersDigital sample temperature displayVariety of temperature controllersAnalogue interfaceMaximum temperature 400°C.Interface connection for central monitoringTemperature documentationCalibration certificateShelves - further options available on request. Fully equipped vacuum pump control station Vacucenter available as an accessory for Vacutherm 6060 and 6130 ovens. Choice of 3 different vacuum pumps available according to operating conditions.
€17.400,00
Vacuum oven 6000 | Type: VT 6060 P-BL, Nominal capacity l: 53, Max. grids: 2
Vacuum oven 6000 | Type: VT 6060 P-BL, Nominal capacity l: 53, Max. grids: 2
Brand: Thermo Elect.LED GmbH (Kendro)Available in 8 variantsFor the careful, rapid drying and heat treatment of temperature sensitive substances and components in the electronics, pharmaceutical, cosmetic and biochemical industries.With electro-polished and internally welded, rectangular chamber made of 1.4571 stainless steel and silicone door seal. Also features analogue pressure display, stainless steel ball valve to control vacuum, rapid air ventilation valve, inert gas connection with pressure relief safety valve for controlled chamber purging and corrosion resistant vacuum fittings. Small flange (DN 25 KF) vacuum fittings are positioned on the rear panel of the cabinet. An overheat cut-out (Class 2) is supplied as standard. 53L models are supplied with two shelves, 128L models are supplied with three shelves.Type M, with heated jacket, range up to 200°C.Heat is conducted from the heated chamber through the shelves to the sample. The shelves are removeable. With Kelvitron® microprocessor temperature controller.Type P, with heated shelves, range up to 300°C (up to 400°C on request).Tubular heating elements in the shelves heat the sample directly, providing rapid heat-up and processing times. With individual shelf temperature control, a common temperature value is set for all plates. With Digicon® electronic temperature controller.Options for VT 6000:Inert gas connectionDigital pressure displayPressure controller with electronic valveViton door seal - TimersDigital sample temperature displayVariety of temperature controllersAnalogue interfaceMaximum temperature 400°C.Interface connection for central monitoringTemperature documentationCalibration certificateShelves - further options available on request. Fully equipped vacuum pump control station Vacucenter available as an accessory for Vacutherm 6060 and 6130 ovens. Choice of 3 different vacuum pumps available according to operating conditions.
€23.000,00
Vacuum oven 6000 | Type: VT 6130 M, Nominal capacity l: 128, Max. grids: 5
Vacuum oven 6000 | Type: VT 6130 M, Nominal capacity l: 128, Max. grids: 5
Brand: Thermo Elect.LED GmbH (Kendro)Available in 8 variantsFor the careful, rapid drying and heat treatment of temperature sensitive substances and components in the electronics, pharmaceutical, cosmetic and biochemical industries.With electro-polished and internally welded, rectangular chamber made of 1.4571 stainless steel and silicone door seal. Also features analogue pressure display, stainless steel ball valve to control vacuum, rapid air ventilation valve, inert gas connection with pressure relief safety valve for controlled chamber purging and corrosion resistant vacuum fittings. Small flange (DN 25 KF) vacuum fittings are positioned on the rear panel of the cabinet. An overheat cut-out (Class 2) is supplied as standard. 53L models are supplied with two shelves, 128L models are supplied with three shelves.Type M, with heated jacket, range up to 200°C.Heat is conducted from the heated chamber through the shelves to the sample. The shelves are removeable. With Kelvitron® microprocessor temperature controller.Type P, with heated shelves, range up to 300°C (up to 400°C on request).Tubular heating elements in the shelves heat the sample directly, providing rapid heat-up and processing times. With individual shelf temperature control, a common temperature value is set for all plates. With Digicon® electronic temperature controller.Options for VT 6000:Inert gas connectionDigital pressure displayPressure controller with electronic valveViton door seal - TimersDigital sample temperature displayVariety of temperature controllersAnalogue interfaceMaximum temperature 400°C.Interface connection for central monitoringTemperature documentationCalibration certificateShelves - further options available on request. Fully equipped vacuum pump control station Vacucenter available as an accessory for Vacutherm 6060 and 6130 ovens. Choice of 3 different vacuum pumps available according to operating conditions.
€16.300,00
Vacuum oven 6000 | Type: VT 6130 M-BL, Nominal capacity l: 128, Max. grids: 5
Vacuum oven 6000 | Type: VT 6130 M-BL, Nominal capacity l: 128, Max. grids: 5
Brand: Thermo Elect.LED GmbH (Kendro)Available in 8 variantsFor the careful, rapid drying and heat treatment of temperature sensitive substances and components in the electronics, pharmaceutical, cosmetic and biochemical industries.With electro-polished and internally welded, rectangular chamber made of 1.4571 stainless steel and silicone door seal. Also features analogue pressure display, stainless steel ball valve to control vacuum, rapid air ventilation valve, inert gas connection with pressure relief safety valve for controlled chamber purging and corrosion resistant vacuum fittings. Small flange (DN 25 KF) vacuum fittings are positioned on the rear panel of the cabinet. An overheat cut-out (Class 2) is supplied as standard. 53L models are supplied with two shelves, 128L models are supplied with three shelves.Type M, with heated jacket, range up to 200°C.Heat is conducted from the heated chamber through the shelves to the sample. The shelves are removeable. With Kelvitron® microprocessor temperature controller.Type P, with heated shelves, range up to 300°C (up to 400°C on request).Tubular heating elements in the shelves heat the sample directly, providing rapid heat-up and processing times. With individual shelf temperature control, a common temperature value is set for all plates. With Digicon® electronic temperature controller.Options for VT 6000:Inert gas connectionDigital pressure displayPressure controller with electronic valveViton door seal - TimersDigital sample temperature displayVariety of temperature controllersAnalogue interfaceMaximum temperature 400°C.Interface connection for central monitoringTemperature documentationCalibration certificateShelves - further options available on request. Fully equipped vacuum pump control station Vacucenter available as an accessory for Vacutherm 6060 and 6130 ovens. Choice of 3 different vacuum pumps available according to operating conditions.
€21.000,00
Vacuum oven 6000 | Type: VT 6130 P, Nominal capacity l: 128, Max. grids: 3
Vacuum oven 6000 | Type: VT 6130 P, Nominal capacity l: 128, Max. grids: 3
Brand: Thermo Elect.LED GmbH (Kendro)Available in 8 variantsFor the careful, rapid drying and heat treatment of temperature sensitive substances and components in the electronics, pharmaceutical, cosmetic and biochemical industries.With electro-polished and internally welded, rectangular chamber made of 1.4571 stainless steel and silicone door seal. Also features analogue pressure display, stainless steel ball valve to control vacuum, rapid air ventilation valve, inert gas connection with pressure relief safety valve for controlled chamber purging and corrosion resistant vacuum fittings. Small flange (DN 25 KF) vacuum fittings are positioned on the rear panel of the cabinet. An overheat cut-out (Class 2) is supplied as standard. 53L models are supplied with two shelves, 128L models are supplied with three shelves.Type M, with heated jacket, range up to 200°C.Heat is conducted from the heated chamber through the shelves to the sample. The shelves are removeable. With Kelvitron® microprocessor temperature controller.Type P, with heated shelves, range up to 300°C (up to 400°C on request).Tubular heating elements in the shelves heat the sample directly, providing rapid heat-up and processing times. With individual shelf temperature control, a common temperature value is set for all plates. With Digicon® electronic temperature controller.Options for VT 6000:Inert gas connectionDigital pressure displayPressure controller with electronic valveViton door seal - TimersDigital sample temperature displayVariety of temperature controllersAnalogue interfaceMaximum temperature 400°C.Interface connection for central monitoringTemperature documentationCalibration certificateShelves - further options available on request. Fully equipped vacuum pump control station Vacucenter available as an accessory for Vacutherm 6060 and 6130 ovens. Choice of 3 different vacuum pumps available according to operating conditions.
€26.258,00
Vacuum oven 6000 | Type: VT 6130 P-BL, Nominal capacity l: 128, Max. grids: 3
Vacuum oven 6000 | Type: VT 6130 P-BL, Nominal capacity l: 128, Max. grids: 3
Brand: Thermo Elect.LED GmbH (Kendro)Available in 8 variantsFor the careful, rapid drying and heat treatment of temperature sensitive substances and components in the electronics, pharmaceutical, cosmetic and biochemical industries.With electro-polished and internally welded, rectangular chamber made of 1.4571 stainless steel and silicone door seal. Also features analogue pressure display, stainless steel ball valve to control vacuum, rapid air ventilation valve, inert gas connection with pressure relief safety valve for controlled chamber purging and corrosion resistant vacuum fittings. Small flange (DN 25 KF) vacuum fittings are positioned on the rear panel of the cabinet. An overheat cut-out (Class 2) is supplied as standard. 53L models are supplied with two shelves, 128L models are supplied with three shelves.Type M, with heated jacket, range up to 200°C.Heat is conducted from the heated chamber through the shelves to the sample. The shelves are removeable. With Kelvitron® microprocessor temperature controller.Type P, with heated shelves, range up to 300°C (up to 400°C on request).Tubular heating elements in the shelves heat the sample directly, providing rapid heat-up and processing times. With individual shelf temperature control, a common temperature value is set for all plates. With Digicon® electronic temperature controller.Options for VT 6000:Inert gas connectionDigital pressure displayPressure controller with electronic valveViton door seal - TimersDigital sample temperature displayVariety of temperature controllersAnalogue interfaceMaximum temperature 400°C.Interface connection for central monitoringTemperature documentationCalibration certificateShelves - further options available on request. Fully equipped vacuum pump control station Vacucenter available as an accessory for Vacutherm 6060 and 6130 ovens. Choice of 3 different vacuum pumps available according to operating conditions.
€29.700,00
Vacuum pump cabinet Vacucenter 1 | Type: with diaphragm pump HMD 4C, max. discharge flow m³ / hr.: 3.0
Vacuum pump cabinet Vacucenter 1 | Type: with diaphragm pump HMD 4C, max. discharge flow m³ / hr.: 3.0
Brand: Thermo Elect.LED GmbH (Kendro)This vacuum pump cabinet can be used with VT 6060 and VT 6130 vacuum drying ovens. It carries the vacuum pump (we offer three different pumps for a broad range of applications) and includes a central power supply and a main switch for both oven and pump.
€11.600,00
Viton sealings for Ovens and Incubators Heratherm™
Viton sealings for Ovens and Incubators Heratherm™
Brand: Thermo Elect.LED GmbH (Kendro)Available in 4 variantsSilicone-free.
€774,00
293031323334

Copyright © 2024 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.