Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

323334353637
Heating bath liquid, BUDDE | Container: 5 litres
Heating bath liquid, BUDDE | Container: 5 litres
Brand: Buddeberg GmbHUse:BUDDE heating bath liquid can be used continuously as a heating medium up to approx. 170 °C. Higher temperatures (below flash point) are possible, but will result in rapid darkening. The low pour point allows the bath liquid also to be used as a cooling medium. Mixtures with 10 % to 30 % water achieve best results.The crucial advantages of BUDDE heating bath liquid compared tothe oils or other organic liquid mainly used are:accidental spillage of water into the bath does not lead to dangerous spitting at temperatures over 100 °C, as the water dissolves in the heating bath liquid and subsequently evaporates safelyBUDDE heating bath liquid can easily be rinsed away with water which eases cleaning of laboratory equipment, e.g. distillation flasks, and also bench or floor if the bath liquid is accidentally spilled.BUDDE heating bath liquid does not foam when mixed with water.Viscosity on addition of water:BUDDE heating bath liquid is quite viscous at ambient or low temperatures, and therefore sometimes difficult to dispense. The addition of 10-20 % water reduces the viscosity and enables easier handling. If the mixture is then heated to 100 °C, the water evaporates without boiling. Further heating is only shortly delayed by this. Before next heating, water can be added again.Water solubility: BUDDE heating bath liquid can be mixed with water in any ratio. The hardness of the water has no effect on the bath liquid.
€189,00
Heating block set for digital dry bath LLG-uniBLOCKTHERM | Description: Heating block set, Dimensions (WxDxH): 95 x 150 x 60 mm
Heating block set for digital dry bath LLG-uniBLOCKTHERM | Description: Heating block set, Dimensions (WxDxH): 95 x 150 x 60 mm
Brand: LLG LabwareHeating block with aluminium beads as an alternative to exchangeable blocks with borings.The aluminium beads ensure high thermal conductivity. Various types of vessels, such as tubes, bottles, and microtitre plates can be individually assembled and simultaneously tempered in the dry bath. Easy to remove from the LLG-uniBLOCKTHERM thanks to two handles. The heating block holds a max. capacity of 700 ml.Scope of supply: Heating block, aluminium beads (1 kg)
€160,80
Heating blocks for digital dry bath LLG-uniBLOCKTHERM | Description: Heating block for 96/384 Microplate
Heating blocks for digital dry bath LLG-uniBLOCKTHERM | Description: Heating block for 96/384 Microplate
Brand: LLG LabwareAvailable in 9 variants
€114,70
Heating circulator baths DYNEO™ DD | Type: DD-BC26, Filling volume L: 19.0 ... 26.0, Bath opening mm: 260 x 350
Heating circulator baths DYNEO™ DD | Type: DD-BC26, Filling volume L: 19.0 ... 26.0, Bath opening mm: 260 x 350
Brand: Julabo GmbHAvailable in 12 variantsFor internal and external applications. With powerful components and a large, easy-to-read colored TFT display. Operation is simple and intuitive via the central controller on the front of the device. Equipped with USB interface and with additional analogue (extra code A) or RS232 (extra code D) interface.Easy switching between internal and external circulationIntegrated cooling coil for counter-coolingBuilt-in drain tapIntegrated programmer for 8 x 60 program stepsClass III (FL) acc. to DIN 12876-1Continuously adjustable, powerful pressure pumpPump connections M16 x 1 (outer thread)External Pt100 sensor connection2 hose connectors for 8 and 12 mm I.W. and bath lid included.
€3.779,00
Heating Circulators Accessories | For Type: C, C-BT5/9/19/27, C-B5/13/17/19/27, CD, CP, Description: Installation cooling coil for counter-cooling with tap water
Heating Circulators Accessories | For Type: C, C-BT5/9/19/27, C-B5/13/17/19/27, CD, CP, Description: Installation cooling coil for counter-cooling with tap water
Brand: Julabo GmbHAvailable in 7 variants
€126,00
Heating circulators MAGIO MS and MX | Type: MS-BC4, Filling volume L: 3 ... 4.5, Dimensions (W x D x H) mm: 230 x 410 x 420
Heating circulators MAGIO MS and MX | Type: MS-BC4, Filling volume L: 3 ... 4.5, Dimensions (W x D x H) mm: 230 x 410 x 420
Brand: Julabo GmbHAvailable in 4 variantsFor precise temperature control of internal and external applications from 3 to 26 litres.Simple control of complex applicationsInfinitely adjustable, extremely powerful pressure and suction pumpLarge, high-resolution TFT touch display with multilingual user interfaceMedium-contacting parts made of stainless steelIntegrated programmerExternal Pt100 connectionUSB interfaceRS232 interfaceEthernet interfaceAnalogue interfaces (optionally)Classification III according to DIN 12876-1High quality thermal insulation of the bath tanksIntegrated drain cock for easy and safe emptying
€4.353,00
Heating circulators with stainless steel baths | Type: CC-225B, Bath capacity L: 25, Pressure pump max. L/min bar: 27 / 0.7
Heating circulators with stainless steel baths | Type: CC-225B, Bath capacity L: 25, Pressure pump max. L/min bar: 27 / 0.7
Brand: Peter Huber KältemaschinenbauAvailable in 10 variantsThe insulated stainless steel baths are suitable for use up to 200°C. All models have a bridge-mounted immersion circulator. With a pump adapter, this combination can also be used with externally closed and externally open (with option level control) applications. Models with the Pilot ONE controller have a variable speed pressure/suction pump and are therefore also suitable for external open applications.
€2.780,00
Heating circulators | Type: CC-202C, Suction pump cap. L/min bar: 22 / 0.4, Pressure pump max. L/min bar: 27 / 0.7
Heating circulators | Type: CC-202C, Suction pump cap. L/min bar: 22 / 0.4, Pressure pump max. L/min bar: 27 / 0.7
Brand: Peter Huber KältemaschinenbauAvailable in 4 variantsGood things come in small packages! Thanks to their low bath volumes the models CC-104A und KISS-104A (with polycarbonate bath) as well as the CC-202C and KISS-202C (with stainless steel bath) are especially suitable for controlling the temperature of small external applications. All models are fitted with rear mounted M16 x 1 pump connections as standard. Models with the Pilot ONE have a speed regulated pressure/suction pump. The temperature constancy, in accordance with DIN12876, is 0.02 K with the Compatible Control models and 0.05 K for the KISS models. Models CC-202C and KISS-202C are fitted with an integrated cooling coil as standard. With the models CC-104A and KISS-104A the cooling coil is an optional extra.
€2.600,00
Heating circulators, CORIO™ CD with stainless steel bath tanks | Type: CORIO™ CD-B33, Filling volume L: 26 ... 39, Dimensions (W x D x H) mm: 910 x 360 x 430
Heating circulators, CORIO™ CD with stainless steel bath tanks | Type: CORIO™ CD-B33, Filling volume L: 26 ... 39, Dimensions (W x D x H) mm: 910 x 360 x 430
Brand: Julabo GmbHAvailable in 7 variantsCORIO™ CD Open Heating Bath Circulators for internal and external temperature applications with stainless steel bath tanks for working temperatures from 20 °C to 150 °C. The Open Heating Bath Circulators of the new CORIO™ series feature high-quality bath tanks made of stainless steel and with pump connections.For internal and external applicationsBright, white, easy to read displayVery quietPump change-over between internal and external circulationUSB connectionIntegrated drain screw (except for B5)
€3.162,00
Heating circulators, CORIO™ CD with transparent bath tanks | Type: CORIO™ CD-BT19, Filling volume L: 14 ... 19, Dimensions (W x D x H) mm: 380 x 580 x 380
Heating circulators, CORIO™ CD with transparent bath tanks | Type: CORIO™ CD-BT19, Filling volume L: 14 ... 19, Dimensions (W x D x H) mm: 380 x 580 x 380
Brand: Julabo GmbHAvailable in 3 variantsCORIO™ CD Open Heating Bath Circulators for internal and external temperature applications with transparent bath tanks for working temperatures from 20 °C to 100 °C. The Open Heating Bath Circulator of the new CORIO™ series feature durable, high-quality transparent bath tanks and pump connections.For internal and external applicationsBright, white, easy to read displayVery quietPump change-over between internal and external circulationUSB connectionClass III (FL) according to DIN 12876-1
€1.607,00
Heating mantles Electrothermal® MHM-200 | Type: MHM-200, For flasks ml: 12000, Max. temperature: 450 °C
Heating mantles Electrothermal® MHM-200 | Type: MHM-200, For flasks ml: 12000, Max. temperature: 450 °C
Brand: Cole-Parmer Ltd. (Electro)Available in 4 variantsHeating mantle has a "V"-shaped design for large, pear-shaped and round-bottom flasks. The bottom opening allows 60° funnels of various diameters to be accommodated. Coiled heating element provides optimal heat transfer. Control heat throughout the mantle using three separate electrical circuits (top, middle, and bottom), each controlled with its own dial switch.Cool-to-the-touch design with powder-coated aluminium casingIndicator lamps for "power on" and "heat on" operationScope of supply: Heating mantle, three sets of integrated support rod clamps, power cords with UK and EU plugs
€4.113,04
Heating plate RC | Type: RC, Temp. range °C: RT ... 370, Heating capacity: 600 W
Heating plate RC | Type: RC, Temp. range °C: RT ... 370, Heating capacity: 600 W
Brand: Velp Scientifica SRLHeating plate made of coated aluminium alloy for uniform heat distribution.Very good chemical resistanceCan be used up to 370 °CSuitable for beakers up to 15 lErgonomic control panel, protected against leaking liquidsIdeal for use with AluBlocks™
€206,00
323334353637

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.