Please wait

Your message is being sent

An error occurred

Flame sterilization carousel schuett easyloop, semi-automatic | Type: schuett easyloop
Flame sterilization carousel schuett easyloop, semi-automatic | Type: schuett easyloop
Brand: schuett-biotec GmbHFor precise and time-controlled flaming of different kinds of inoculating loops. Minimization of gas consumption, the life of the inoculating loops is significantly increased. The inoculating loop is placed into the carousel after use and is sterilized immediately after turning the holder in flaming position. Sterilization time infinitely adjustable. Designed for continuous work-flow with sample series in the Laminar Flow. Comfortable manual rotation, fully automated flaming process. For use with Safety Bunsen Burners schuett phoenix II standard and accu. Sterilization time: 3 to 5 s (adjustable from 1 s to 120 min). For 6 inoculating loop holders.
€990,00
Flame sterilization carousel schuett flammy R, fully automatic | Type: schuett flammy R
Flame sterilization carousel schuett flammy R, fully automatic | Type: schuett flammy R
Brand: schuett-biotec GmbHFor precise and time-controlled flaming of different kinds of inoculating loops. Minimization of gas consumption, the life of the inoculating loops is significantly increased. The inoculating loop is placed into the carousel after use and is sterilized immediately after turning the holder in flaming position. Sterilization time infinitely adjustable. Designed for continuous work-flow with sample series in the Laminar Flow. Fully automated rotation and inoculating. In combination with a standard gas-safety-burner (e.g. schuett phoenix II). Sterilization time: 2 to 10 s. For 5 inoculating loop holders.
€1.390,00
Flame sterilizer / Blowlamp Soudogaz® X 2000 / X 2000 PZ | Type: Soudogaz® X 2000 PZ with piezo ignition
Flame sterilizer / Blowlamp Soudogaz® X 2000 / X 2000 PZ | Type: Soudogaz® X 2000 PZ with piezo ignition
Brand: Camping Gaz (Deutschland) GmbHAvailable in 2 variantsAir volume regulation for stepless adjustment of flame size. For operation with gas cartridge C 206 GLSWith durable housing to protect the cartridge.For flaming and sterilizingMobile hand-held deviceOne-hand operation possible
€46,21
Flame sterilizer schuett easyflame | Type: schuett easyflame for propane/butane gas
Flame sterilizer schuett easyflame | Type: schuett easyflame for propane/butane gas
Brand: schuett-biotec GmbHAvailable in 4 variantsMobile device for scarfing and flame-sterilising. With piezoelectric-ignition and gas supply control to create a soft or sharp flame. Infinite adjustment of the flame. Highest operational safety. In short-term use, the flame is activated as long as the push button is pressed. For continuous operation with lock key.schuett easyflame to use with propane/butane gas1. Suitable with gas cartridges with 7/16" connection thread, e.g. CG 1750, Express 444, AT 2000.2. Adapters for CV 360 or CP 250 gas cartridges optional.schuett easyflameplus for connecting natural gas and propane / butane gas with gas safety hoses1. Natural gas hose for central gas supply for easy plugging the device (hose barb included)2. Propane / butane gas hose with fitting (1/4 "-left-hand thread) for the use of gas cartridge adapters or gas cylinders with pressure reducer. Matching adapters C 206 and CV 300/470 (already equipped with gas safety hose, 0.5m and reducer). Gas safety tubing in other lengths on request.
€250,00
Flanged Tubing, PTFE, PA | Int. diam. mm: 1.6, Outer diam. mm: 3.2, Overall length mm: 500
Flanged Tubing, PTFE, PA | Int. diam. mm: 1.6, Outer diam. mm: 3.2, Overall length mm: 500
Brand: Bohlender GmbHAvailable in 8 variantsFlanged PTFE tubing with black tube end fittings UNF ¼" 28 G made of PP and washers made of PA. The tubing is ready for use. Temperature resistant from 0 to +100 °C, pressure resistant up to 30 bar, universal chemical resistance.
€14,84
Flash dryer for laboratory glassware | Type: STL 56 Flash dryer
Flash dryer for laboratory glassware | Type: STL 56 Flash dryer
Brand: C. Gerhardt GmbH & Co.KGHot-air blower for drying laboratory glassware. Rotatable drying chimney fitted with 56 lateral drying tubes. 24 tubes 16mm diameter for large containers, 32 tubes 11mm diameter for small containers.Cold or hot operation with electronic timer.
€3.250,00
Flashlight Energizer® TAC 700, Aluminium | Type: Energizer® TAC 700
Flashlight Energizer® TAC 700, Aluminium | Type: Energizer® TAC 700
Brand: VOLTRONIC GmbHMade of sturdy aircraft aluminium, with unbreakable strike bezel head, waterproof. Illumination range up to 100 m, 3 light modes adjustable via rear push button (max. 700 m). The removable clip can be used with both orientations. Incl. 2 x CR123 batteries.
€35,80
Flask Carriers H 135 series for IKA Magnetic Stirrers | Type: H 135.26, Volume ml: 250, Handle: +
Flask Carriers H 135 series for IKA Magnetic Stirrers | Type: H 135.26, Volume ml: 250, Handle: +
Brand: IKA-Werke GmbH & Co.KGAvailable in 9 variantsFlask carriers for Magnetic stirrers with or without handles as indicated.
€321,00
Flask Clamps, stainless steel | For flasks ml: 50
Flask Clamps, stainless steel | For flasks ml: 50
Brand: Ohaus GmbHAvailable in 15 variantsClamps for Erlenmeyer flasks, Media bottles* and Fernbach flasks**. Incl. screws for easy attachment to platforms. Clamps for flasks with 50 ml and higher are supplied with a spring to hold the flask in place.
€36,10
Flask Clips for Sonorex insert baskets | Type: EK 100 for insert baskets up to 65 mm dia.
Flask Clips for Sonorex insert baskets | Type: EK 100 for insert baskets up to 65 mm dia.
Brand: Bandelin electronicAvailable in 5 variantsStainless steel. Suitable for insert baskets and instrument holders with mesh size up to 12.5mm x 12.5mm and for glass holder GL for DT...F. Essential for the attachment of laboratory flasks.
€46,00
Flask Inlay Series H 135 for IKA Magnetic Stirrers | Type: H 135.401, Volume ml: 500, Int. diam. mm: 108.0
Flask Inlay Series H 135 for IKA Magnetic Stirrers | Type: H 135.401, Volume ml: 500, Int. diam. mm: 108.0
Brand: IKA-Werke GmbH & Co.KGAvailable in 7 variantsFor holding round flasks when used with magnetic stirrers. Made of anodised aluminium. Can be used up to max. 180 °C.Fits on magnetic stirrers: RCT basic, RET basic, RH basic, RH basic white, RH digital, RH digital white, RET control-visc, RET control-visc white, IKA plate (RCT digital), C-MAG HS 7 control (only with adapter).Please order the appropriate inlay for the designated flask size.
€147,00
Flask rings, pressed cork | For flasks: 1000-2000 ml, Ext. Ø: 140 mm, Int. Ø: 90 mm
Flask rings, pressed cork | For flasks: 1000-2000 ml, Ext. Ø: 140 mm, Int. Ø: 90 mm
Brand: BR Solution GmbHAvailable in 9 variantsHeight 30mm.
€6,48

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.