Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

Corning BV
123456
Microcentrifuge Prism™ / Prism™ R | Description: Individual adapter for 0.5/0.6ml tubes
Microcentrifuge Prism™ / Prism™ R | Description: Individual adapter for 0.5/0.6ml tubes
Brand: Corning BVAvailable in 6 variantsOperation can be timed, continuous or momentary, using the "quick" button. Vibration free operation is ensured by an isolation system. In the event of a significant imbalance, operation of the centrifuge is automatically stopped. Deceleration at the end of a run is very quick, but will not disrupt samples. Supplied with a uniquely designed 24 x 1.5 ml/2.0 ml rotor that allows easy access to the tops of the sample tubes. Individual tube slots in the solid aluminum rotor support tubes along their length and contain the sample in the event of tube failure. The rotor is seated on a tapered shaft which facilitates easy removal for cleaning and autoclaving.Adapters for smaller tubes and PCR strips -please oder separately.
€45,12
Microcentrifuge Prism™ / Prism™ R | Description: Prism™ ambient microcentrifuge with 24 place rotor
Microcentrifuge Prism™ / Prism™ R | Description: Prism™ ambient microcentrifuge with 24 place rotor
Brand: Corning BVAvailable in 6 variantsOperation can be timed, continuous or momentary, using the "quick" button. Vibration free operation is ensured by an isolation system. In the event of a significant imbalance, operation of the centrifuge is automatically stopped. Deceleration at the end of a run is very quick, but will not disrupt samples. Supplied with a uniquely designed 24 x 1.5 ml/2.0 ml rotor that allows easy access to the tops of the sample tubes. Individual tube slots in the solid aluminum rotor support tubes along their length and contain the sample in the event of tube failure. The rotor is seated on a tapered shaft which facilitates easy removal for cleaning and autoclaving.Adapters for smaller tubes and PCR strips -please oder separately.
€1.227,67
Microcentrifuge Prism™ / Prism™ R | Description: Prism™ R ambient microcentrifuge with 24 place rotor and cooling
Microcentrifuge Prism™ / Prism™ R | Description: Prism™ R ambient microcentrifuge with 24 place rotor and cooling
Brand: Corning BVAvailable in 6 variantsOperation can be timed, continuous or momentary, using the "quick" button. Vibration free operation is ensured by an isolation system. In the event of a significant imbalance, operation of the centrifuge is automatically stopped. Deceleration at the end of a run is very quick, but will not disrupt samples. Supplied with a uniquely designed 24 x 1.5 ml/2.0 ml rotor that allows easy access to the tops of the sample tubes. Individual tube slots in the solid aluminum rotor support tubes along their length and contain the sample in the event of tube failure. The rotor is seated on a tapered shaft which facilitates easy removal for cleaning and autoclaving.Adapters for smaller tubes and PCR strips -please oder separately.
€4.757,22
Microcentrifuge Prism™ / Prism™ R | Description: StripSpin adapter for 0.2ml tubes and strips
Microcentrifuge Prism™ / Prism™ R | Description: StripSpin adapter for 0.2ml tubes and strips
Brand: Corning BVAvailable in 6 variantsOperation can be timed, continuous or momentary, using the "quick" button. Vibration free operation is ensured by an isolation system. In the event of a significant imbalance, operation of the centrifuge is automatically stopped. Deceleration at the end of a run is very quick, but will not disrupt samples. Supplied with a uniquely designed 24 x 1.5 ml/2.0 ml rotor that allows easy access to the tops of the sample tubes. Individual tube slots in the solid aluminum rotor support tubes along their length and contain the sample in the event of tube failure. The rotor is seated on a tapered shaft which facilitates easy removal for cleaning and autoclaving.Adapters for smaller tubes and PCR strips -please oder separately.
€95,60
Microcentrifuge Spectrafuge™24D | Type: Spectrafuge™24D, blue accents
Microcentrifuge Spectrafuge™24D | Type: Spectrafuge™24D, blue accents
Brand: Corning BVAvailable in 2 variantsThe Spectrafuge™ 24D combines innovations such as a unique, easy access rotor, exclusive multi-flow air cooling system and high performance drive with a digital microprocessor that precisely regulates operation. Parameters are selected with two "smart" knobs and values are shown on large, easy to read, LED displays. Speed can be set and displayed in rpm or g-force. Runs can be set timed, continuous or momentary.The unique design of the 24-place rotor allows easy access to the tops of the tubes. An optional StripSpin™ adapter fits onto the rotor for spinning 0.2ml tubes and strips. A powerful, brushless motor quickly accelerates the rotor to set speed. Air enters the centrifuge through vents on the back of the housing and it is circulated in multiple directions to maximize cooling. The result is a cool running microcentrifuge that keeps samples close to ambient temperature, even during extended runs at maximum speed. For samples that require below ambient temperatures, the Spectrafuge 24D may be used in a cold room.
€1.154,79
Microcentrifuge Spectrafuge™24D | Type: Spectrafuge™24D, purple accents
Microcentrifuge Spectrafuge™24D | Type: Spectrafuge™24D, purple accents
Brand: Corning BVAvailable in 2 variantsThe Spectrafuge™ 24D combines innovations such as a unique, easy access rotor, exclusive multi-flow air cooling system and high performance drive with a digital microprocessor that precisely regulates operation. Parameters are selected with two "smart" knobs and values are shown on large, easy to read, LED displays. Speed can be set and displayed in rpm or g-force. Runs can be set timed, continuous or momentary.The unique design of the 24-place rotor allows easy access to the tops of the tubes. An optional StripSpin™ adapter fits onto the rotor for spinning 0.2ml tubes and strips. A powerful, brushless motor quickly accelerates the rotor to set speed. Air enters the centrifuge through vents on the back of the housing and it is circulated in multiple directions to maximize cooling. The result is a cool running microcentrifuge that keeps samples close to ambient temperature, even during extended runs at maximum speed. For samples that require below ambient temperatures, the Spectrafuge 24D may be used in a cold room.
€1.154,79
Microlitre centrifuge, Spectrafuge™ 16M | Description: Microlitre centrifuge, Spectrafuge®™ 16M complete with rotor
Microlitre centrifuge, Spectrafuge™ 16M | Description: Microlitre centrifuge, Spectrafuge®™ 16M complete with rotor
Brand: Corning BVMicrolitre centrifuge for microtubes up to 2.0ml.Features:Brushless, induction motorSteplessly adjustable speed range: 1000rpm to 14000rpmTimer pre-selection from 1 min. to 30 min. with "continuous run" facility"quick" pulse button for short time runsConstructed to IEC 1010 requirements
€1.287,84
Mini Centrifuge C1601 | Type: C1601-B, blue lid
Mini Centrifuge C1601 | Type: C1601-B, blue lid
Brand: Corning BVAvailable in 3 variantsOnce sample area is loaded and the lid is closed, the rotor rapidly accelerates to 6000 rpm. Ideal for bringing small droplets to the bottom of tubes for micro-filtrations or basic separations.Quick release rotor system, no tools needed to exchange rotorsElectronic braking, for rapid decelerationDual lid switchCompact, rugged designScope of supply: Mini Centrifuge C1601, Rotor for 8 x 1.5/2.0 ml tubes, Rotor for 4 x 8-strip tubes, individual adapters for 0.2 ml, 0.25 ml and 0.5 ml tubes, fits in rotor 6770-RT, power adapter 24V
€179,88
Mini Centrifuge C1601 | Type: C1601-G, grey lid
Mini Centrifuge C1601 | Type: C1601-G, grey lid
Brand: Corning BVAvailable in 3 variantsOnce sample area is loaded and the lid is closed, the rotor rapidly accelerates to 6000 rpm. Ideal for bringing small droplets to the bottom of tubes for micro-filtrations or basic separations.Quick release rotor system, no tools needed to exchange rotorsElectronic braking, for rapid decelerationDual lid switchCompact, rugged designScope of supply: Mini Centrifuge C1601, Rotor for 8 x 1.5/2.0 ml tubes, Rotor for 4 x 8-strip tubes, individual adapters for 0.2 ml, 0.25 ml and 0.5 ml tubes, fits in rotor 6770-RT, power adapter 24V
€179,88
Mini Centrifuge C1601 | Type: C1601-P, purple lid
Mini Centrifuge C1601 | Type: C1601-P, purple lid
Brand: Corning BVAvailable in 3 variantsOnce sample area is loaded and the lid is closed, the rotor rapidly accelerates to 6000 rpm. Ideal for bringing small droplets to the bottom of tubes for micro-filtrations or basic separations.Quick release rotor system, no tools needed to exchange rotorsElectronic braking, for rapid decelerationDual lid switchCompact, rugged designScope of supply: Mini Centrifuge C1601, Rotor for 8 x 1.5/2.0 ml tubes, Rotor for 4 x 8-strip tubes, individual adapters for 0.2 ml, 0.25 ml and 0.5 ml tubes, fits in rotor 6770-RT, power adapter 24V
€179,88
Mini Centrifuge Prism™ Mini | Type: Individual adapters for 0.2ml thermal cycling tubes
Mini Centrifuge Prism™ Mini | Type: Individual adapters for 0.2ml thermal cycling tubes
Brand: Corning BVAvailable in 3 variantsThe Prism™ Mini can be used for a wide range of molecular biology separations and quick spins. The centrifuge was designed to be extremely compact with an exceptionally small footprint. It includes 2 quick release interchangeable rotors, which spin up to 6000 rpm's. The electronic brake and self opening lid allow for quick deceleration to reduce handling time. The Prism™ Mini's maintenance-free drive is remarkably quiet and the unique design allows for excellent airflow, to protect temperature sensitive samples.Quick release rotor exchangeIncreased sample capacityRapid sample processingOne-step sample retrievalScope of supply: Mini Centrifuge incl. 8 place tube rotor for 1.5/2.0 ml microcentrifuge tubes, incl. adapters for 0.5 ml and 0.4 ml tubes and PCR strip rotor for 4 strips with 8 x 0.2 ml tubes or 32 x 0.2 ml single tubes.Further adapters available on request.
€56,19
Mini Centrifuge Prism™ Mini | Type: Individual adapters for 0.5/0.6ml tubes
Mini Centrifuge Prism™ Mini | Type: Individual adapters for 0.5/0.6ml tubes
Brand: Corning BVAvailable in 3 variantsThe Prism™ Mini can be used for a wide range of molecular biology separations and quick spins. The centrifuge was designed to be extremely compact with an exceptionally small footprint. It includes 2 quick release interchangeable rotors, which spin up to 6000 rpm's. The electronic brake and self opening lid allow for quick deceleration to reduce handling time. The Prism™ Mini's maintenance-free drive is remarkably quiet and the unique design allows for excellent airflow, to protect temperature sensitive samples.Quick release rotor exchangeIncreased sample capacityRapid sample processingOne-step sample retrievalScope of supply: Mini Centrifuge incl. 8 place tube rotor for 1.5/2.0 ml microcentrifuge tubes, incl. adapters for 0.5 ml and 0.4 ml tubes and PCR strip rotor for 4 strips with 8 x 0.2 ml tubes or 32 x 0.2 ml single tubes.Further adapters available on request.
€56,19
123456

Copyright © 2024 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.