Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

VITLAB GmbH
12345
Sample vials, PFA | Type : flat, Capacity ml : 50, Outer diam. mm : 29
Sample vials, PFA | Type : flat, Capacity ml : 50, Outer diam. mm : 29
Brand: VITLAB GmbHAvailable in 7 variantsSample vials made of PFA with conical interior and raised graduation (5 ml subdivisions).Available in two different types, depending on application:Cored outside bottomFlat surface on bottom of vial for improved heat transfer (Recommended for use with hot platesBoth 50 ml sizes fit in common Autosampler racks.Scope of delivery is without screw cap. Please order the screw cap (Cat. No. 6.283 283) separately.
€36,67
Sample vials, PFA | Type : Screw cap
Sample vials, PFA | Type : Screw cap
Brand: VITLAB GmbHAvailable in 7 variantsSample vials made of PFA with conical interior and raised graduation (5 ml subdivisions).Available in two different types, depending on application:Cored outside bottomFlat surface on bottom of vial for improved heat transfer (Recommended for use with hot platesBoth 50 ml sizes fit in common Autosampler racks.Scope of delivery is without screw cap. Please order the screw cap (Cat. No. 6.283 283) separately.
€17,32
Snap cap, for autosampler-vials, PFA | Outer diam. mm: 18, Height mm: 5
Snap cap, for autosampler-vials, PFA | Outer diam. mm: 18, Height mm: 5
Brand: VITLAB GmbH
€10,27
Volumetric flasks, PFA, class A, with screw cap | Capacity ml: 10, Tolerance ± ml: 0.04, Height mm: 90
Volumetric flasks, PFA, class A, with screw cap | Capacity ml: 10, Tolerance ± ml: 0.04, Height mm: 90
Brand: VITLAB GmbHAvailable in 6 variantsHighly transparent. Class A tolerances according to DIN EN ISO 1042.The PFA screw cap guards against contamination.Outstanding chemical resistance, can be used with strong oxidants, highly concentrated acids and alkalis, hydrocarbons, and ketones.With laser-engraved lot number and batch certificate. Thermal stress up to 121ºC (autoclaving) does not permanently exceed the tolerance limit.To preserve the ring mark, do not clean at temperatures exceeding 60ºC.The advantages of PFALong-term maintenance of low-concentration reference materials in PFA containersNo memory effectsPractically no carryover, no cross-contamination due to the extremely hydrophobic, anti-adhesive and smooth surfacesHigh thermal stability, from -200°C to +260°CChemical inertness against nearly all chemicalsGood transparency and dimensional stability, suitable for volumetric instrumentsEasy to cleanUse of high purity raw materials
€152,74
Volumetric flasks, PFA, class A, with screw cap | Capacity ml: 100, Tolerance ± ml: 0.10, Height mm: 180
Volumetric flasks, PFA, class A, with screw cap | Capacity ml: 100, Tolerance ± ml: 0.10, Height mm: 180
Brand: VITLAB GmbHAvailable in 6 variantsHighly transparent. Class A tolerances according to DIN EN ISO 1042.The PFA screw cap guards against contamination.Outstanding chemical resistance, can be used with strong oxidants, highly concentrated acids and alkalis, hydrocarbons, and ketones.With laser-engraved lot number and batch certificate. Thermal stress up to 121ºC (autoclaving) does not permanently exceed the tolerance limit.To preserve the ring mark, do not clean at temperatures exceeding 60ºC.The advantages of PFALong-term maintenance of low-concentration reference materials in PFA containersNo memory effectsPractically no carryover, no cross-contamination due to the extremely hydrophobic, anti-adhesive and smooth surfacesHigh thermal stability, from -200°C to +260°CChemical inertness against nearly all chemicalsGood transparency and dimensional stability, suitable for volumetric instrumentsEasy to cleanUse of high purity raw materials
€199,81
Volumetric flasks, PFA, class A, with screw cap | Capacity ml: 25, Tolerance ± ml: 0.04, Height mm: 115
Volumetric flasks, PFA, class A, with screw cap | Capacity ml: 25, Tolerance ± ml: 0.04, Height mm: 115
Brand: VITLAB GmbHAvailable in 6 variantsHighly transparent. Class A tolerances according to DIN EN ISO 1042.The PFA screw cap guards against contamination.Outstanding chemical resistance, can be used with strong oxidants, highly concentrated acids and alkalis, hydrocarbons, and ketones.With laser-engraved lot number and batch certificate. Thermal stress up to 121ºC (autoclaving) does not permanently exceed the tolerance limit.To preserve the ring mark, do not clean at temperatures exceeding 60ºC.The advantages of PFALong-term maintenance of low-concentration reference materials in PFA containersNo memory effectsPractically no carryover, no cross-contamination due to the extremely hydrophobic, anti-adhesive and smooth surfacesHigh thermal stability, from -200°C to +260°CChemical inertness against nearly all chemicalsGood transparency and dimensional stability, suitable for volumetric instrumentsEasy to cleanUse of high purity raw materials
€157,27
Volumetric flasks, PFA, class A, with screw cap | Capacity ml: 250, Tolerance ± ml: 0.15, Height mm: 235
Volumetric flasks, PFA, class A, with screw cap | Capacity ml: 250, Tolerance ± ml: 0.15, Height mm: 235
Brand: VITLAB GmbHAvailable in 6 variantsHighly transparent. Class A tolerances according to DIN EN ISO 1042.The PFA screw cap guards against contamination.Outstanding chemical resistance, can be used with strong oxidants, highly concentrated acids and alkalis, hydrocarbons, and ketones.With laser-engraved lot number and batch certificate. Thermal stress up to 121ºC (autoclaving) does not permanently exceed the tolerance limit.To preserve the ring mark, do not clean at temperatures exceeding 60ºC.The advantages of PFALong-term maintenance of low-concentration reference materials in PFA containersNo memory effectsPractically no carryover, no cross-contamination due to the extremely hydrophobic, anti-adhesive and smooth surfacesHigh thermal stability, from -200°C to +260°CChemical inertness against nearly all chemicalsGood transparency and dimensional stability, suitable for volumetric instrumentsEasy to cleanUse of high purity raw materials
€249,54
Volumetric flasks, PFA, class A, with screw cap | Capacity ml: 50, Tolerance ± ml: 0.06, Height mm: 150
Volumetric flasks, PFA, class A, with screw cap | Capacity ml: 50, Tolerance ± ml: 0.06, Height mm: 150
Brand: VITLAB GmbHAvailable in 6 variantsHighly transparent. Class A tolerances according to DIN EN ISO 1042.The PFA screw cap guards against contamination.Outstanding chemical resistance, can be used with strong oxidants, highly concentrated acids and alkalis, hydrocarbons, and ketones.With laser-engraved lot number and batch certificate. Thermal stress up to 121ºC (autoclaving) does not permanently exceed the tolerance limit.To preserve the ring mark, do not clean at temperatures exceeding 60ºC.The advantages of PFALong-term maintenance of low-concentration reference materials in PFA containersNo memory effectsPractically no carryover, no cross-contamination due to the extremely hydrophobic, anti-adhesive and smooth surfacesHigh thermal stability, from -200°C to +260°CChemical inertness against nearly all chemicalsGood transparency and dimensional stability, suitable for volumetric instrumentsEasy to cleanUse of high purity raw materials
€160,99
Volumetric flasks, PFA, class A, with screw cap | Capacity ml: 500, Tolerance ± ml: 0.25, Height mm: 270
Volumetric flasks, PFA, class A, with screw cap | Capacity ml: 500, Tolerance ± ml: 0.25, Height mm: 270
Brand: VITLAB GmbHAvailable in 6 variantsHighly transparent. Class A tolerances according to DIN EN ISO 1042.The PFA screw cap guards against contamination.Outstanding chemical resistance, can be used with strong oxidants, highly concentrated acids and alkalis, hydrocarbons, and ketones.With laser-engraved lot number and batch certificate. Thermal stress up to 121ºC (autoclaving) does not permanently exceed the tolerance limit.To preserve the ring mark, do not clean at temperatures exceeding 60ºC.The advantages of PFALong-term maintenance of low-concentration reference materials in PFA containersNo memory effectsPractically no carryover, no cross-contamination due to the extremely hydrophobic, anti-adhesive and smooth surfacesHigh thermal stability, from -200°C to +260°CChemical inertness against nearly all chemicalsGood transparency and dimensional stability, suitable for volumetric instrumentsEasy to cleanUse of high purity raw materials
€286,95
Wide-mouth bottles with screw thread, PFA | Capacity ml : 1000, Outer diam. mm : 96, Height mm : 217
Wide-mouth bottles with screw thread, PFA | Capacity ml : 1000, Outer diam. mm : 96, Height mm : 217
Brand: VITLAB GmbHAvailable in 4 variantsTransparent, with tightly sealing screw closure (saw-tooth thread S and built-in sealing lip). Excellent resistance to temperature (from -200 to +250 °C). Ideal for long-term storage of high-purity oxidants, acids, alkalis, as well as hydrocarbons, trace analysis solvents and standards. Autoclavable at 121°C (2 bar) according to DIN EN 285.
€256,48
Wide-mouth bottles with screw thread, PFA | Capacity ml : 2000, Outer diam. mm : 130, Height mm : 245
Wide-mouth bottles with screw thread, PFA | Capacity ml : 2000, Outer diam. mm : 130, Height mm : 245
Brand: VITLAB GmbHAvailable in 4 variantsTransparent, with tightly sealing screw closure (saw-tooth thread S and built-in sealing lip). Excellent resistance to temperature (from -200 to +250 °C). Ideal for long-term storage of high-purity oxidants, acids, alkalis, as well as hydrocarbons, trace analysis solvents and standards. Autoclavable at 121°C (2 bar) according to DIN EN 285.
€524,94
Wide-mouth bottles with screw thread, PFA | Capacity ml : 500, Outer diam. mm : 76, Height mm : 179
Wide-mouth bottles with screw thread, PFA | Capacity ml : 500, Outer diam. mm : 76, Height mm : 179
Brand: VITLAB GmbHAvailable in 4 variantsTransparent, with tightly sealing screw closure (saw-tooth thread S and built-in sealing lip). Excellent resistance to temperature (from -200 to +250 °C). Ideal for long-term storage of high-purity oxidants, acids, alkalis, as well as hydrocarbons, trace analysis solvents and standards. Autoclavable at 121°C (2 bar) according to DIN EN 285.
€185,93
12345

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.