Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

Guangzhou JET Bio-Filtration
123456
Cell culture flask, with 3DSphearo™ Ultra-low Adsorption surface, PS, sterile | Nominal capacity: 250 ml
Cell culture flask, with 3DSphearo™ Ultra-low Adsorption surface, PS, sterile | Nominal capacity: 250 ml
Brand: Guangzhou JET Bio-FiltrationThe three-dimensional (3D) spheroid model can better simulate the three-dimensional cell networks, cell-matrix, and cell-cell interactions and is ideally suited for drug screening, in vitro tumour research and exploration of stem cell differentiation and sorting.The 3DSphearo™ Ultra-low Adsorption surface has been designed for spheroids (e.g. 3D tumour spheroids) and organoid cultures. The surface has been subjected to a special gel treatment, which gives the cell culture flask extremely strong anti-protein adsorption and anti-cell adhesion. This promotes the suspension growth of cells and enables fast, consistent, and reproducible cell spheroid culture.Surface is non-cytotoxic, biologically inert, and non-degradableDNase/RNase-freePyrogen-freeSterile
€241,20
Cell culture flasks, treated, PS, sterile | Working volume ml: 175, culture surface cm2: 75.0, Neck: angled
Cell culture flasks, treated, PS, sterile | Working volume ml: 175, culture surface cm2: 75.0, Neck: angled
Brand: Guangzhou JET Bio-FiltrationAvailable in 13 variantsThese cell culture flasks with treated surfaces for the cultivation of adherent cells are available with different growth areas from 12.5 to 300 cm². Available with vented or plug-seal caps made from polyethylene. Vented caps contain a 0.22 µm hydrophobic filter to allow gas exchange and minimize risk of cross-contamination. Plug-seal caps can be used in closed systems, providing a liquid and gas sheer seal, but by simply unscrewing the cap one quarter of a turn, this cap can also be used in an open system.Innovative angled neck design offers good pipette and cell scraper accessUpper triangular and wider base shape provides stabilityStackableSpecial writing area near the neckEngraved graduation on both flask sidesSterilized by gamma irradiationPyrogen-freeIndividually packed in resealable outer packaging with zip fastenerMaterial: Polystyrene
€106,65
Cell culture flasks, treated, PS, sterile | Working volume ml: 175, culture surface cm2: 75.0, Neck: angled
Cell culture flasks, treated, PS, sterile | Working volume ml: 175, culture surface cm2: 75.0, Neck: angled
Brand: Guangzhou JET Bio-FiltrationAvailable in 13 variantsThese cell culture flasks with treated surfaces for the cultivation of adherent cells are available with different growth areas from 12.5 to 300 cm². Available with vented or plug-seal caps made from polyethylene. Vented caps contain a 0.22 µm hydrophobic filter to allow gas exchange and minimize risk of cross-contamination. Plug-seal caps can be used in closed systems, providing a liquid and gas sheer seal, but by simply unscrewing the cap one quarter of a turn, this cap can also be used in an open system.Innovative angled neck design offers good pipette and cell scraper accessUpper triangular and wider base shape provides stabilityStackableSpecial writing area near the neckEngraved graduation on both flask sidesSterilized by gamma irradiationPyrogen-freeIndividually packed in resealable outer packaging with zip fastenerMaterial: Polystyrene
€106,94
Cell culture flasks, treated, PS, sterile | Working volume ml: 175, culture surface cm2: 75.0, Neck: angled
Cell culture flasks, treated, PS, sterile | Working volume ml: 175, culture surface cm2: 75.0, Neck: angled
Brand: Guangzhou JET Bio-FiltrationAvailable in 13 variantsThese cell culture flasks with treated surfaces for the cultivation of adherent cells are available with different growth areas from 12.5 to 300 cm². Available with vented or plug-seal caps made from polyethylene. Vented caps contain a 0.22 µm hydrophobic filter to allow gas exchange and minimize risk of cross-contamination. Plug-seal caps can be used in closed systems, providing a liquid and gas sheer seal, but by simply unscrewing the cap one quarter of a turn, this cap can also be used in an open system.Innovative angled neck design offers good pipette and cell scraper accessUpper triangular and wider base shape provides stabilityStackableSpecial writing area near the neckEngraved graduation on both flask sidesSterilized by gamma irradiationPyrogen-freeIndividually packed in resealable outer packaging with zip fastenerMaterial: Polystyrene
€5,33
Cell culture flasks, treated, PS, sterile | Working volume ml: 20, culture surface cm2: 12.5, Neck: angled
Cell culture flasks, treated, PS, sterile | Working volume ml: 20, culture surface cm2: 12.5, Neck: angled
Brand: Guangzhou JET Bio-FiltrationAvailable in 13 variantsThese cell culture flasks with treated surfaces for the cultivation of adherent cells are available with different growth areas from 12.5 to 300 cm². Available with vented or plug-seal caps made from polyethylene. Vented caps contain a 0.22 µm hydrophobic filter to allow gas exchange and minimize risk of cross-contamination. Plug-seal caps can be used in closed systems, providing a liquid and gas sheer seal, but by simply unscrewing the cap one quarter of a turn, this cap can also be used in an open system.Innovative angled neck design offers good pipette and cell scraper accessUpper triangular and wider base shape provides stabilityStackableSpecial writing area near the neckEngraved graduation on both flask sidesSterilized by gamma irradiationPyrogen-freeIndividually packed in resealable outer packaging with zip fastenerMaterial: Polystyrene
€8,68
Cell culture flasks, treated, PS, sterile | Working volume ml: 20, culture surface cm2: 12.5, Neck: angled
Cell culture flasks, treated, PS, sterile | Working volume ml: 20, culture surface cm2: 12.5, Neck: angled
Brand: Guangzhou JET Bio-FiltrationAvailable in 13 variantsThese cell culture flasks with treated surfaces for the cultivation of adherent cells are available with different growth areas from 12.5 to 300 cm². Available with vented or plug-seal caps made from polyethylene. Vented caps contain a 0.22 µm hydrophobic filter to allow gas exchange and minimize risk of cross-contamination. Plug-seal caps can be used in closed systems, providing a liquid and gas sheer seal, but by simply unscrewing the cap one quarter of a turn, this cap can also be used in an open system.Innovative angled neck design offers good pipette and cell scraper accessUpper triangular and wider base shape provides stabilityStackableSpecial writing area near the neckEngraved graduation on both flask sidesSterilized by gamma irradiationPyrogen-freeIndividually packed in resealable outer packaging with zip fastenerMaterial: Polystyrene
€7,68
Cell culture flasks, treated, PS, sterile | Working volume ml: 20, culture surface cm2: 12.5, Neck: angled
Cell culture flasks, treated, PS, sterile | Working volume ml: 20, culture surface cm2: 12.5, Neck: angled
Brand: Guangzhou JET Bio-FiltrationAvailable in 13 variantsThese cell culture flasks with treated surfaces for the cultivation of adherent cells are available with different growth areas from 12.5 to 300 cm². Available with vented or plug-seal caps made from polyethylene. Vented caps contain a 0.22 µm hydrophobic filter to allow gas exchange and minimize risk of cross-contamination. Plug-seal caps can be used in closed systems, providing a liquid and gas sheer seal, but by simply unscrewing the cap one quarter of a turn, this cap can also be used in an open system.Innovative angled neck design offers good pipette and cell scraper accessUpper triangular and wider base shape provides stabilityStackableSpecial writing area near the neckEngraved graduation on both flask sidesSterilized by gamma irradiationPyrogen-freeIndividually packed in resealable outer packaging with zip fastenerMaterial: Polystyrene
€173,56
Cell culture flasks, treated, PS, sterile | Working volume ml: 20, culture surface cm2: 12.5, Neck: angled
Cell culture flasks, treated, PS, sterile | Working volume ml: 20, culture surface cm2: 12.5, Neck: angled
Brand: Guangzhou JET Bio-FiltrationAvailable in 13 variantsThese cell culture flasks with treated surfaces for the cultivation of adherent cells are available with different growth areas from 12.5 to 300 cm². Available with vented or plug-seal caps made from polyethylene. Vented caps contain a 0.22 µm hydrophobic filter to allow gas exchange and minimize risk of cross-contamination. Plug-seal caps can be used in closed systems, providing a liquid and gas sheer seal, but by simply unscrewing the cap one quarter of a turn, this cap can also be used in an open system.Innovative angled neck design offers good pipette and cell scraper accessUpper triangular and wider base shape provides stabilityStackableSpecial writing area near the neckEngraved graduation on both flask sidesSterilized by gamma irradiationPyrogen-freeIndividually packed in resealable outer packaging with zip fastenerMaterial: Polystyrene
€153,59
Cell culture flasks, treated, PS, sterile | Working volume ml: 40, culture surface cm2: 25.0, Neck: angled
Cell culture flasks, treated, PS, sterile | Working volume ml: 40, culture surface cm2: 25.0, Neck: angled
Brand: Guangzhou JET Bio-FiltrationAvailable in 13 variantsThese cell culture flasks with treated surfaces for the cultivation of adherent cells are available with different growth areas from 12.5 to 300 cm². Available with vented or plug-seal caps made from polyethylene. Vented caps contain a 0.22 µm hydrophobic filter to allow gas exchange and minimize risk of cross-contamination. Plug-seal caps can be used in closed systems, providing a liquid and gas sheer seal, but by simply unscrewing the cap one quarter of a turn, this cap can also be used in an open system.Innovative angled neck design offers good pipette and cell scraper accessUpper triangular and wider base shape provides stabilityStackableSpecial writing area near the neckEngraved graduation on both flask sidesSterilized by gamma irradiationPyrogen-freeIndividually packed in resealable outer packaging with zip fastenerMaterial: Polystyrene
€130,10
Cell culture flasks, treated, PS, sterile | Working volume ml: 40, culture surface cm2: 25.0, Neck: angled
Cell culture flasks, treated, PS, sterile | Working volume ml: 40, culture surface cm2: 25.0, Neck: angled
Brand: Guangzhou JET Bio-FiltrationAvailable in 13 variantsThese cell culture flasks with treated surfaces for the cultivation of adherent cells are available with different growth areas from 12.5 to 300 cm². Available with vented or plug-seal caps made from polyethylene. Vented caps contain a 0.22 µm hydrophobic filter to allow gas exchange and minimize risk of cross-contamination. Plug-seal caps can be used in closed systems, providing a liquid and gas sheer seal, but by simply unscrewing the cap one quarter of a turn, this cap can also be used in an open system.Innovative angled neck design offers good pipette and cell scraper accessUpper triangular and wider base shape provides stabilityStackableSpecial writing area near the neckEngraved graduation on both flask sidesSterilized by gamma irradiationPyrogen-freeIndividually packed in resealable outer packaging with zip fastenerMaterial: Polystyrene
€123,45
Cell culture flasks, treated, PS, sterile | Working volume ml: 400, culture surface cm2: 182.0, Neck: angled
Cell culture flasks, treated, PS, sterile | Working volume ml: 400, culture surface cm2: 182.0, Neck: angled
Brand: Guangzhou JET Bio-FiltrationAvailable in 13 variantsThese cell culture flasks with treated surfaces for the cultivation of adherent cells are available with different growth areas from 12.5 to 300 cm². Available with vented or plug-seal caps made from polyethylene. Vented caps contain a 0.22 µm hydrophobic filter to allow gas exchange and minimize risk of cross-contamination. Plug-seal caps can be used in closed systems, providing a liquid and gas sheer seal, but by simply unscrewing the cap one quarter of a turn, this cap can also be used in an open system.Innovative angled neck design offers good pipette and cell scraper accessUpper triangular and wider base shape provides stabilityStackableSpecial writing area near the neckEngraved graduation on both flask sidesSterilized by gamma irradiationPyrogen-freeIndividually packed in resealable outer packaging with zip fastenerMaterial: Polystyrene
€70,09
Cell culture flasks, treated, PS, sterile | Working volume ml: 400, culture surface cm2: 182.0, Neck: angled
Cell culture flasks, treated, PS, sterile | Working volume ml: 400, culture surface cm2: 182.0, Neck: angled
Brand: Guangzhou JET Bio-FiltrationAvailable in 13 variantsThese cell culture flasks with treated surfaces for the cultivation of adherent cells are available with different growth areas from 12.5 to 300 cm². Available with vented or plug-seal caps made from polyethylene. Vented caps contain a 0.22 µm hydrophobic filter to allow gas exchange and minimize risk of cross-contamination. Plug-seal caps can be used in closed systems, providing a liquid and gas sheer seal, but by simply unscrewing the cap one quarter of a turn, this cap can also be used in an open system.Innovative angled neck design offers good pipette and cell scraper accessUpper triangular and wider base shape provides stabilityStackableSpecial writing area near the neckEngraved graduation on both flask sidesSterilized by gamma irradiationPyrogen-freeIndividually packed in resealable outer packaging with zip fastenerMaterial: Polystyrene
€69,84
123456

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.